<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1073028186981917&amp;ev=PageView&amp;noscript=1">

Training Modules Library

The aQuiRe training modules library comes with over 300 accredited courses, crafted by the construction and safety experts. It includes interactive modules, quizzes, and presentations, covering a variety of topics related to construction work and site safety.

Close

Looking for something?

Type a keyword and we’ll search through categories, subcategories, modules and descriptions.

GPS Rover Part 1
Understanding the setup and assembly of a TSC-3
/ Plan It / GPS / GPS Rover Part 1
GPS Rover Part 2
Connecting a TSC-3 and TSC-7 controller and understanding device operation
/ Plan It / GPS / GPS Rover Part 2
Perkadox CH-50
Material sheets for Perkadox CH-50 by Transpo Industries.
/ Transpo / Perkadox CH-50
T-17
Material sheets for T-17 by Transpo Industries.
/ Transpo / T-17
T41S Primer
Material sheets for T41S Primer by Transpo Industries.
/ Transpo / T41S Primer
Sweeper: System Check
Proper methods for confirming broom attachment is connected and functioning properly; basic maneuvers for efficiently sweeping material.
/ Clear It / Clean Up / Sweeper: System Check
Silt Fence It!
Proper installation of silt fence, focusing on site terrain and slope, water flow and projected soil disturbance during construction.
/ Clear It / Earthworks / Silt Fence It!
Bulldozer: Rough Time
Using a bulldozer to perform basic rough grading work, preparing a site for fine grading and restoration.
/ Clear It / Earthworks / Bulldozer: Rough Time
Excavator: Can You Dig it?
Basic operation for digging round and flat bottom trenches. Covers establishing proper pitch and grade, as well as safety fundamentals.
/ Clear It / Earthworks / Excavator: Can You Dig it?
Trench It
Best-Practices when digging a trench, requirements for installing trench shields, understanding the importance of soil conditions.
/ Clear It / Earthworks / Trench It
Tamp That: System Check
This module discusses the proper system check that a mechanic must perform to ensure that the attachment is functioning properly before sending it out for use in the field.bu
/ Clear It / Earthworks / Tamp That: System Check
Culvert: Excavate
Expert approach for replacing a partially collapsed culvert. Outlines benching requirements, dewatering and basic methods to address scour.
/ Clear It / Waterworks / Culvert: Excavate
Trimble Siteworks Part 1
GPS Software. Foundational overview of layout, stakeout and field measuring a project.
/ Plan It / GPS / Trimble Siteworks Part 1
Trimble Siteworks Part 2
GPS Software. Foundational overview of layout, stakeout and field measuring a project.
/ Plan It / GPS / Trimble Siteworks Part 2
Working Round the Railroad: Right of Way
It's critical for contracted construction crews to understand the job and safety requirements when doing work around an active railroad right of way.
/ Plan It / Boundaries / Working Round the Railroad: Right of Way
Water is Solid: Hydro-Demolition
Demonstration on demolition using high pressure water, identification of key operating elements of the mechanical set up.
/ Clear It / Demolition / Water is Solid: Hydro-Demolition
Crush It!
This module covers the best practices for crusher maintenance, safety protocols, LOTO and basic operations.
/ Clear It / Demolition / Crush It!
Hammer Time: System Check
This module details the correct method for performing a system check of a hammer attachment prior to field use.r
/ Clear It / Demolition / Hammer Time: System Check
ChainSaw It!
Overview on proper and safe techniques for using a chainsaw. This modules covers various cutting techniques such as limbing and bucking, as well as various tools and accessories.
/ Clear It / Clean Up / ChainSaw It!
Snowblow It: Operate
Covers the basic operations and efficient control of the snowblower attachment.
/ Clear It / Clean Up / Snowblow It: Operate
Motor Grade It: Pitch Perfect
Covering the basics on setting pitch and grade when operating a motor grader.
/ Clear It / Earthworks / Motor Grade It: Pitch Perfect
The Slope: Squeeze It
This earthworks module covers basic berm construction, working with highly saturated materials and stabilizing a slope.
/ Clear It / Earthworks / The Slope: Squeeze It
The Slope: Aerate It
Techniques for safely and efficiently managing moisture rich material from dredging activities.
/ Clear It / Earthworks / The Slope: Aerate It
The Slope: Lay It Out
Covers safe dozer operations on a slope and tactics when working with wet material.
/ Clear It / Earthworks / The Slope: Lay It Out
Culvert: Place and Cover
Expert approach for replacing a partially collapsed culvert. Outlines how to properly backfill and compact the ground to prevent settling problems with the road.
/ Clear It / Waterworks / Culvert: Place and Cover
Detention
Practical application of placing an underground detention system for drainage control. Covers basic surveying, installation approach and backfilling.
/ Clear It / Waterworks / Detention
Lay It Under
This module covers trenching practices and placing underground drainage. Demonstration of the proper use of filter fabric, installing connectors and backfilling.
/ Clear It / Waterworks / Lay It Under
Get Over It! Stream Crossing
This dynamic module covers the foundational design for a temporary stream crossing, various uses of material and proper maintenance of the crossing.
/ Clear It / Waterworks / Get Over It! Stream Crossing
Just Dredge It!
Dredging is the process of excavating and removing moisture-rich material from an environment. This module covers key methods for actively managing materials.
/ Clear It / Waterworks / Just Dredge It!
Just Dredge It: The Bank
This module will show you how to successfully grade the slope to reduce erosion and keep material from filling the channel.
/ Clear It / Waterworks / Just Dredge It: The Bank
The Abutment: Forming!
Master overview of installing forms building an abutment wall on a bridge. Focuses on rebar elements; the use of spacers and wall ties; installing form walls and waterstops.
/ Build It / The Bridge / The Abutment: Forming!
True or False: Falsework
Our master carpenter outlines the process of forming a bridge deck and demonstrates how to safely install falsework.
/ Build It / The Bridge / True or False: Falsework
Deck Pans Part 3: Last SIP
Part 3, the final steps to installing the deck pans on a bridge, covers how to cut and place pans on an angle.au
/ Build It / The Bridge / Deck Pans Part 3: Last SIP
Lowboy Disconnect
Expert lowboy driver explains the basics of a walk around inspection for a tractor trailer and key observations for pre-trip safety. Identification of components of the tractor.
/ Haul It / Tow Behind / Lowboy Disconnect
LeeBoy Tack Distributor Part 2
Loading and heating of the machine before operation
/ Haul It / Tow Behind / LeeBoy Tack Distributor Part 2
WTH is WZTC
Definition of the basics for Work Zone Traffic Control as well as the responsibilities and methods used to communicate with the traveling public.
/ Control It / WZTC / WTH is WZTC
Motor Grader: Inspect
Complete walk-around and basic inspection procedure for the machine.
/ Equipment Inspect / Daily Walk-Around / Motor Grader: Inspect
Rigging Hardware: Inspection
Comprehensive overview of the different styles of rigging hardware and their uses.
/ Equipment Inspect / Daily Walk-Around / Rigging Hardware: Inspection
Tri Axle: Components
An examination of the working components of a triaxle dump truck. Such as the differentials, traction control and PTO.
/ Systems / Components / Tri Axle: Components
Sweep It: Attach
Identification of the working components of the attachment, the importance of proper hydraulic pressure and how to position the machine to properly hook up the broom.
/ Tools / Attach It / Sweep It: Attach
Tamper: Attach
Details the tamper attachment and the proper procedure for connecting it to a machine. Covers basic preventative maintenance.
/ Tools / Attach It / Tamper: Attach
CAT SkidSteer: Attachments
Operation Guide showing button controls for: cold planer, mulcher, wheel saw. [Resource only. No video.]
/ Tools / Attach It / CAT SkidSteer: Attachments
Mini Mill: System Check
Functional check of the attachments operational system to ensure proper functioning. Content covers different cutting bits, grease points, controls for angling and rate of rotation.
/ Tools / Tool Maintenance / Mini Mill: System Check
Its Pouring! Finishing It Out
Overview of techniques and best practices for performing finishing work on a bridge deck pour.
/ Build It / The Bridge / Its Pouring! Finishing It Out
The Deck: Dry Run & Layout
This module provides pro-tips on measuring for haunch depth during a dry run to ensure proper deck thickness.
/ Build It / The Bridge / The Deck: Dry Run & Layout
The Abutment: Pile Drive It! ("Get Your Footing")
This module covers the principles behind pile driving and how it reinforces the earth for building the abutment walls of the bridge.
/ Build It / The Bridge / The Abutment: Pile Drive It! ("Get Your Footing")
Rebar
Overview on the basics in design, function and installation of rebar for tensile strength in a bridge deck.
/ Build It / The Bridge / Rebar
Swinging Steel
Setting the steel girders for a temporary bridge. Demonstration of various rigging techniques.
/ Build It / The Bridge / Swinging Steel
Little Pour
Outline of the process for a small-scale deck pour. Step-by-step demonstration of individual responsibilities and utilization of tools and equipment.
/ Build It / The Bridge / Little Pour
Deck Pans Part 1: Take A SIP
Part 1 of correct deck pan installation. Detailed approach for proper measurements and weld placement, as well as pro-tips for installing angles.
/ Build It / The Bridge / Deck Pans Part 1: Take A SIP
Deck Pans Part 2: SIP Carefully
Part 2, this covers all basic safety measures when cutting, welding and setting up to install Stay In Place forms for a bridge deck.
/ Build It / The Bridge / Deck Pans Part 2: SIP Carefully
Its Pouring! Putting It In Place
Introduction to the process of pouring concrete for bridge deck construction.
/ Build It / The Bridge / Its Pouring! Putting It In Place
Pave It! 101
Dave walks you through operating a paver.
/ Build It / The Road / Pave It! 101
The Widener: Operations
Explores the fundamentals for using a widener for road and shoulder work.
/ Build It / The Road / The Widener: Operations
Curb It!
Setting granite curb in an urban setting, basic methods for establishing alignment and maintaining stabilization.
/ Build It / The Road / Curb It!
Lowboy: Chain it Down
How to load and chain down a large, rubber tired machine. Includes rate charts, working load limits, demonstration of best practices, identification of tie-down points and risk reduction.
/ Haul It / Tied Down / Lowboy: Chain it Down
Tie It Down
Demonstration of how to use ratchet straps to secure a mixed load on flatbed trailer. Identification of proper tension and application for multiple straps.
/ Haul It / Tied Down / Tie It Down
Pre-Cast
Best practices when loading and securing precast concrete forms. Covers basic rigging methods for lifting multiple types of precast materials.
/ Haul It / Tied Down / Pre-Cast
Haul It! Tri Axle
This module is about basic material loading and hauling operations; discussion of gear shifting, dump controls and preventative maintenance routines.
/ Haul It / Material Hauling / Haul It! Tri Axle
Articulating Dump Truck
Inside and outside, a thorough review of the major working parts and components of the off-road haul truck. Proper operation and basic applications are covered.
/ Haul It / Material Hauling / Articulating Dump Truck
Haul It! Fuel Truck
Outline of the requirements for HAZMAT licensing in NYS and best practices for fueling equipment in the field. Focusing on safety and efficiency in the field.
/ Haul It / Material Hauling / Haul It! Fuel Truck
Haul Roads
The basics of why, how and where a haul road is used in an excavation project. Covers tips for maintaining a haul road and how to minimize disruption.
/ Haul It / Material Hauling / Haul Roads
Crafco Trail
How to safely load and operate a Crafco trailer mounted melter for laying down crack sealant.
/ Haul It / Tow Behind / Crafco Trail
LeeBoy Tack Distributer Part 1
Safety and inspection of the machine
/ Haul It / Tow Behind / LeeBoy Tack Distributer Part 1
LeeBoy Tack Distributor Part 3
Basic operations of the LeeBoy
/ Haul It / Tow Behind / LeeBoy Tack Distributor Part 3
LeeBoy Tack Distributor Part 4
Cleaning the machine and safely storing it
/ Haul It / Tow Behind / LeeBoy Tack Distributor Part 4
The Crane: License
The requirements and basics for how to obtain and maintain a crane license in NYS. Outlines testing fundamentals.
/ Lift It / Crane / The Crane: License
Hand Signals
Covers the importance of communication between an operator and a ground person directing machine movements. Resource charts and live demonstration of hand signals for safe job site communication.
/ Lift It / Crane / Hand Signals
Forklift Training Part 1: Inspect
This module will walk you through how to Inspect a forklift before operation.
/ Lift It / Fork Trucks / Forklift Training Part 1: Inspect
Forklift Training Part 2: Basic Functions
This modules will show you all of the Basic Functions of a forklift.
/ Lift It / Fork Trucks / Forklift Training Part 2: Basic Functions
Forklift Training Part 3: Operation
This module will take you through all the Operation safety you need to know while using a forklift.
/ Lift It / Fork Trucks / Forklift Training Part 3: Operation
Forklift Training Part 4: Safety
This video will go over the best safety practices when operating a forklift.
/ Lift It / Fork Trucks / Forklift Training Part 4: Safety
Aerial Lift: Operation
In this module, master trainer Jim Jones demonstrates how to conduct a function test, understand the basic controls, and safely operate an aerial work platform (AWP) in the field.
/ Lift It / Elevated Work Platforms / Aerial Lift: Operation
Watch Out, Work Zones!
Highlighting the various hazards and dangers in a work zone for a worker and how to minimize personal risk.
/ Control It / WZTC / Watch Out, Work Zones!
Hold it Down
A work zone traffic control module that focuses on the importance of properly weighting traffic control devices to prevent disruption from weather events.
/ Control It / WZTC / Hold it Down
Taper
Basic training on the appropriate use & installation of tapers in a work zone. Recommended speed charts and distance references included.
/ Control It / WZTC / Taper
Portable Traffic Lights
Portable Traffic Lights are an ideal way to control traffic when a flag person is not available. In this module we will look at inspecting and setting up a portable traffic device on a temporary roadside work area.
/ Control It / WZTC / Portable Traffic Lights
Flag it
Expert traffic control technician Jim Jones explains basic flagging procedures for work zone traffic control situations in rural and urban settings.
/ Control It / WZTC / Flag it
Flagger Training Part 1
Understanding the importance of communication while flagging for a jobsite
/ Control It / WZTC / Flagger Training Part 1
Flagger Training Part 2
Understanding key actions that will help make you a responsible and capable flagger.
/ Control It / WZTC / Flagger Training Part 2
Flagger Training Part 3
Part 3 of this course will discuss how to safety communicate with drivers.
/ Control It / WZTC / Flagger Training Part 3
Flagger Training Part 4
Part 4 of this course shows correct hand signals for workers to communicate with traffic.
/ Control It / WZTC / Flagger Training Part 4
Chain Saw: Inspect
This module teaches a healthy respect for and knowledge of the chainsaw's limits and proper maintenance. It will help the user effectively mitigate risks and stay safe.
/ Equipment Inspect / Daily Walk-Around / Chain Saw: Inspect
Excavator: Inspect
This module demonstrates the correct inspection of the excavator. Each element is identified with a full review of proper procedures.
/ Equipment Inspect / Daily Walk-Around / Excavator: Inspect
Lowboy Truck and Trailer: Inspect
Expert lowboy driver explains the basics of a walk around inspection for a tractor trailer and key observations for pre-trip safety. Identification of components of the tractor.
/ Equipment Inspect / Daily Walk-Around / Lowboy Truck and Trailer: Inspect
Triaxle Dump Truck: Inspect
Topics covered in this safety module include the correct procedure for a walk-around, daily inspection and proper procedures for WZTC if the truck breaks down.
/ Equipment Inspect / Daily Walk-Around / Triaxle Dump Truck: Inspect
Snow Blower
The pre-operation protocol that must be followed before operating the snow blower attachment. Also covers basic trouble shooting.
/ Equipment Inspect / Daily Walk-Around / Snow Blower
The Crane: Inspection
This module demonstrates the correct inspection of the crane. Each element is identified with a full review of proper procedures.
/ Equipment Inspect / Daily Walk-Around / The Crane: Inspection
Sling Inspection
Overview of the different types of slings and how to stay safe while using each type.
/ Equipment Inspect / Daily Walk-Around / Sling Inspection
Aerial Work Platform: Inspect
This module demonstrates how to conduct a thorough daily inspection of an aerial work platform.
/ Equipment Inspect / Daily Walk-Around / Aerial Work Platform: Inspect
DEF
The practical application and safety requirements for using Diesel Exhaust Fluid. Overview on how to keep contaminants from entering the fuel system.
/ Systems / Fluids / DEF
Hydraulics 101
Expert overview on the function of hydraulic systems and proper maintenance practices. Focus: EXCAVATOR
/ Systems / Fluids / Hydraulics 101
Grease Points and Lubrication
Expert overview on the importance of applying grease to a machine. Definition of high-use components, key grease points and best practices.av
/ Systems / Fluids / Grease Points and Lubrication
Cool It Down
Expert overview on the function of radiator systems. Details on proper maintenance and cleaning practices.o
/ Systems / Air and Cooling / Cool It Down
MotorGrader: Components
Step by step overview of the major elements of the machine, the function and basic operating guidelines.
/ Systems / Components / MotorGrader: Components
Crane: Conventional
Discusses the key differences between varies types of cranes and gives a basic overview of a conventional friction crane.r
/ Systems / Components / Crane: Conventional
The Crane: Hydraulic
Demonstration of the interior controls and industry best practices when operating a hydraulic crane.
/ Systems / Components / The Crane: Hydraulic
Paver: Component
The components of the paver, basic function of key elements and basic maintenance procedures.
/ Systems / Components / Paver: Component
Motor Grader: System Check
This module goes over the key functioning elements of the motor grader. It covers the important mechanical systems that need to be fired up prior to operation.
/ Systems / Components / Motor Grader: System Check
Track Time: Maintenance
Identification of the key components of a track machine and preventative maintenance procedures.
/ Systems / Components / Track Time: Maintenance
Hammer Time: Attach
Outlines the correct method to hook up the attachment and covers basic preventative maintenance.
/ Tools / Attach It / Hammer Time: Attach
Mini Mill Attach
Attaching a mini mill head with Steve.
/ Tools / Attach It / Mini Mill Attach
Twist-A-Wrist Bucket Attach
Steve explains how to attach a twist-a-wrist.
/ Tools / Attach It / Twist-A-Wrist Bucket Attach
Snow Blow It: Attach
How to engage the fusion coupler and connect the hydraulic and electric systems between a snow blower attachment and a CAT 938M.
/ Tools / Attach It / Snow Blow It: Attach
Snow Blower Disconnect
How to disengage the fusion coupler and disconnect hydraulic and electric systems between a snow blower attachment and a CAT 938M.
/ Tools / Attach It / Snow Blower Disconnect
LOTO
Demonstration of the situations when Lock Out Tag Out must be used. Best practices for engaging Lock Out Tag Out and preventative measures.
/ Tools / Tool Maintenance / LOTO
Twist-O-Wrist System Check
Best practices when operating a machine with a twist-a-wrist  attachment.
/ Tools / Tool Maintenance / Twist-O-Wrist System Check
Hammer Like A Pro
Workers have been using hammers for the past 30,000 years. Are you swinging like a caveman or hammering like a pro? In this tip-filled module, master carpenter Rick Klug reviews how to select the right hammer for the job while using it safely and effectively on a construction site. Along the way he shares numerous time-saving tricks and insights that he’s picked up over 45 years in the trade.
/ Tools / Hand Tools / Hammer Like A Pro
Ergonomics and Back Injury Prevention
Back injuries are the leading cause of disability cases in the construction industry. In this module, CAHill's Carley Hill and safety expert James Jones, explore the benefits of workplace ergonomics and share helpful pro tips on how to keep your back working optimally for years to come.
/ Personal Safety / Body / Ergonomics and Back Injury Prevention
Heat Stress
How to identify the signs of heat stress on the human body, and what to do if you see these signs.
/ Personal Safety / Body / Heat Stress
Cold Stress
Best practices when working in near or below freezing conditions.
/ Personal Safety / Body / Cold Stress
PPE Overview
This module identifies the value and importance of using the correct personal protection equipment.
/ Personal Safety / PPE / PPE Overview
The Field: Pathogen Prevention
Pathogens, viruses and sickness can be prevented with best practices. This module covers methods in the field for protecting yourself, coworkers, and those at home.
/ Jobsite Hazards / Environmental / The Field: Pathogen Prevention
Indoor: Pathogen Prevention
Due to the increased risk of sickness from COVID-19, this module provides training on higher levels of vigilance when maintaining and cleaning public buildings.
/ Jobsite Hazards / Environmental / Indoor: Pathogen Prevention
Bloodborne Pathogens
This module will bring awareness to the potential dangers of bloodborne pathogens and the steps you can take to protect yourself from exposure.
/ Jobsite Hazards / Environmental / Bloodborne Pathogens
Slips, Trips and Falls
Raise your awareness to recognize & remove fall hazards. This training defines the hazards so you understand how to reduce exposure to preventable falls.
/ Jobsite Hazards / Focus Four / Slips, Trips and Falls
Caught Between
Maintaining safe practices on the job site to prevent caught between incidents or accidents is critical.
/ Jobsite Hazards / Focus Four / Caught Between
Sexual Harassment V2
This module details several case studies considered unacceptable under the law, as well as examples of acceptable behavior in the workplace.
/ Compliance / Sexual Harassment / Sexual Harassment V2
Don't Zone Out
This module covers the risks of drowsy driving, environmental exposures and the importance of staying alert and aware of surroundings.
/ Personal Safety / Body / Don't Zone Out
Respiratory Protection
Staying safe on the job with the correct respiratory PPE.
/ Personal Safety / PPE / Respiratory Protection
Hearing Conservation
Protecting yourself from job hazards that can cause hearing loss
/ Personal Safety / PPE / Hearing Conservation
Fire Protection & Extinguisher Use
Understanding how to use an extinguisher and how to protect ourselves from fire hazards
/ Personal Safety / Emergency Response / Fire Protection & Extinguisher Use
Chemical Hazards
A construction site is filled with visible and invisible chemicals that can be harmful to workers. This module explores the most common types of dangerous chemical agents on a jobsite and how workers can protect themselves from exposure.
/ Jobsite Hazards / Environmental / Chemical Hazards
Asbestos Awareness
Understanding how asbestos affects the body and how to protect ourselves.
/ Jobsite Hazards / Environmental / Asbestos Awareness
Silica
The dangers of silica and how to prevent exposure
/ Jobsite Hazards / Environmental / Silica
Housekeeping
This module provides an overview on internal housekeeping. It focuses on keeping the shop(s) and municipal buildings clean, and free of anything that can cause injury.
/ Jobsite Hazards / Environmental / Housekeeping
Lead Safety
Understanding the dangers of being exposed to lead.
/ Jobsite Hazards / Environmental / Lead Safety
Struck By
This module increases awareness of the risks associated with incidents involving job site equipment and workers. The focus is on how to prevent accidents by maintaining safe positioning and distances.
/ Jobsite Hazards / Focus Four / Struck By
Confined Space
The Confined Space Safety module covers risks associated with entering and working in closed environments, as well as basic rescue procedures.
/ Jobsite Hazards / Above & Below / Confined Space
Aerial Work Platform: Safety
An aerial work platform must never be operated without a proper understanding of safety. This module explains how to correctly put on a safety harness, and outlines the required safety guidelines when operating an AWP.
/ Jobsite Hazards / Above & Below / Aerial Work Platform: Safety
Dig Safely Course: Part 1
This module discusses the proper procedures for One Call when doing excavation work. Covers pre-demolition meetings, advance notifications and submitting a ticket.
/ Jobsite Hazards / Above & Below / Dig Safely Course: Part 1
Dig Safely Course: Part 2
Review of tolerance zones, test hole depths and methods as well as removal depths to properly expose utilities.
/ Jobsite Hazards / Above & Below / Dig Safely Course: Part 2
Dig Safely Course: Part 3
Know your location: Finding the tolerance zone, understanding the requirements prior to excavation.
/ Jobsite Hazards / Above & Below / Dig Safely Course: Part 3
Dig Safely Course: Part 4
Know your location
/ Jobsite Hazards / Above & Below / Dig Safely Course: Part 4
Dig Safely Course: Part 5
Backfill
/ Jobsite Hazards / Above & Below / Dig Safely Course: Part 5
What is a Hazard?
This module overviews the safety precautions a person should take when dealing with hazards on the job.
/ Site Leader / What is a Hazard?
Sexual Harassment V1
This module covers the definition and terms identified as sexual harassment. Outlining the process for filing a complaint, as well as who is protected under the law.
/ Compliance / Sexual Harassment / Sexual Harassment V1
Keeping Your CDL
Overview of the basic requirements to keep your Commercial Drivers License (CDL).
/ Compliance / Licensing / Keeping Your CDL
Under The Lights:Overnight Highway Traffic Control
Night highway construction work brings a unique challenge for trafffic control teams. This module follows an overnight traffic crew as they progressively bump out temporary channeling devices to block off three lanes of an expressway. Learn from an experienced supervisor on the proper use of a truck mounted attenuator, arrow board, portable light plant, and how a team works in sync to secure a new lane from high speed traffic under the work lights.
/ Control It / WZTC / Under The Lights:Overnight Highway Traffic Control
Compression Seal
Material sheets for Compression Seal by Watson Bowman Acme.
/ Watson Bowman Acme / Compression Seal
Crete II
Material sheets for Crete II by Watson Bowman Acme.
/ Watson Bowman Acme / Crete II
Evazote
Material sheets for Evazote by Watson Bowman Acme.
/ Watson Bowman Acme / Evazote
Expandex
Material sheets for Expandex by Watson Bowman Acme.
/ Watson Bowman Acme / Expandex
Flex
Material sheets for Flex by Watson Bowman Acme.
/ Watson Bowman Acme / Flex
FS Bridge Seal
Material sheets for FS Bridge Seal by Watson Bowman Acme.
/ Watson Bowman Acme / FS Bridge Seal
Modular
Material sheets for Modular by Watson Bowman Acme.
/ Watson Bowman Acme / Modular
Silicone Seal
Material sheets for Silicone Seal by Watson Bowman Acme.
/ Watson Bowman Acme / Silicone Seal
SPS
Material sheets for SPS by Watson Bowman Acme.
/ Watson Bowman Acme / SPS
Strip Seal
Material sheets for Strip Seal by Watson Bowman Acme.
/ Watson Bowman Acme / Strip Seal
Surface Mend
Material sheets for Surface Mend by Watson Bowman Acme.
/ Watson Bowman Acme / Surface Mend
Trans Flex
Material sheets for Trans Flex by Watson Bowman Acme.
/ Watson Bowman Acme / Trans Flex
Ply-Bonder
Material sheets for Ply-Bonder by Polyset.
/ Polyset / Ply-Bonder
Ply-Krete FS
Material sheets for Ply-Krete FS by Polyset.
/ Polyset / Ply-Krete FS
Ply-Primer
Material sheets for Ply-Primer by Polyset.
/ Polyset / Ply-Primer
Ply-Seal
Material sheets for Ply-Seal by Polyset.
/ Polyset / Ply-Seal
Ply-Seal FG
Material sheets for Ply-Seal FG by Polyset.
/ Polyset / Ply-Seal FG
Polyset Pneumatic Dispensing Gun
Material sheets for Polyset Pneumatic Dispensing Gun by Polyset.
/ Polyset / Polyset Pneumatic Dispensing Gun
MINI HEX: Safety
Exploration of the safety components of the machine, including operator ergonomics and emergency features.
/ Next Gen HEX Mini / MINI HEX: Safety
MINI HEX: Inspect
A proper pre-shift walk around and machine inspection procedure of the Next Gen HEX Mini.
/ Next Gen HEX Mini / MINI HEX: Inspect
MINI HEX: Assist Calibration
This module goes over how to use the assist calibration in the Next Gen HEX Mini.
/ Next Gen HEX Mini / MINI HEX: Assist Calibration
MINI HEX: Operations Overview
A general overview of the Next Gen HEX Mini operations including cab controls, start up, basic movements and tool operations.
/ Next Gen HEX Mini / MINI HEX: Operations Overview
MINI HEX: Systems
The exploration of the major operating systems, safety considerations, and key areas of scheduled service for the Next Gen HEX Mini.
/ Next Gen HEX Mini / MINI HEX: Systems
MINI HEX FEATURE FOCUS: Monitor
This module highlights how to use the monitor component of the machine.
/ Next Gen HEX Mini / MINI HEX FEATURE FOCUS: Monitor
MINI HEX FEATURE FOCUS: Stick Steer
A demonstration of the unique Stick Steer feature on the Mini HEX and its application.
/ Next Gen HEX Mini / MINI HEX FEATURE FOCUS: Stick Steer
D6XE: Systems
The overview of the fundamentals and service of the electric and hydraulic operating systems of the D6 XE.
/ D6XE / D6XE: Systems
D6XE FEATURE FOCUS: Operators Monitor, Seat Controls, and Waster Handler Package
This module provides training on the unique features of the D6XE such as the operators monitor, seat controls and waster handler package (if applicable).
/ D6XE / D6XE FEATURE FOCUS: Operators Monitor, Seat Controls, and Waster Handler Package
D6XE: Operation Overview
In this module we provide an overview of the operation of the machine.
/ D6XE / D6XE: Operation Overview
D6XE: Safety
This video highlights the safety features of the D6XE.
/ D6XE / D6XE: Safety
D6XE: Inspect
A proper walk around inspection of the machine prior to operation.
/ D6XE / D6XE: Inspect
D6XE: Operate
This D6 XE operation overview provides resources on how to use the controls, speed settings, steering mechanisms as well as functional tips.
/ D6XE / D6XE: Operate
MEDIUM WHEEL LOADER: Safety Features
A look at the safety tips and features found on the CAT Medium Wheel Loader family of machines.
/ Wheel Loader Medium / MEDIUM WHEEL LOADER: Safety Features
MEDIUM WHEEL LOADER: Operation Overview
Basic startup, operation and shutdown procedure for the CAT Medium Wheel Loader family (950-966).
/ Wheel Loader Medium / MEDIUM WHEEL LOADER: Operation Overview
MEDIUM WHEEL LOADER: Daily Inspection
A proper pre-shift walk around and machine inspection procedure for the Medium Wheel Loader.
/ Wheel Loader Medium / MEDIUM WHEEL LOADER: Daily Inspection
ARTICULATED TRUCK: Daily Inspection
An overview of the daily walk around inspection for the Articulated Dump Truck (ADT).
/ Articulating Dump Trucks / ARTICULATED TRUCK: Daily Inspection
ARTICULATED TRUCK FEATURE FOCUS: Automated Hoist
Understand the automated hoist function of the Articulating Dump Truck (ADT).
/ Articulating Dump Trucks / ARTICULATED TRUCK FEATURE FOCUS: Automated Hoist
ARTICULATED TRUCK: Safety & Systems
This video is an overview of how to stay safe on the Articulating Dump Truck (ADT), and how to maintain the machine through service maintenance.
/ Articulating Dump Trucks / ARTICULATED TRUCK: Safety & Systems
ARTICULATED TRUCK: Operations Overview
In this module gain knowledge of the operations of the Articulated Dump Truck (ADT).
/ Articulating Dump Trucks / ARTICULATED TRUCK: Operations Overview
TIER 4 FINAL: DEF Testing and Quality Concerns
Testing the Diesel Exhaust Fluid and having the knowledge of what quality the fluid needs to be for optimal performance.
/ Tier 4 Final / TIER 4 FINAL: DEF Testing and Quality Concerns
TIER 4 FINAL: DEF Maintenance Shutdown Process
The proper procedure for shutting down Tier 4 Final machines.
/ Tier 4 Final / TIER 4 FINAL: DEF Maintenance Shutdown Process
LANDFILL COMPACTOR: Equipment Safety
An overview of the Landfill Compactor safety features.
/ Landfill Compactor / LANDFILL COMPACTOR: Equipment Safety
LANDFILL COMPACTOR: Daily Inspection
An overview of the walk around daily inspection of the Landfill Compactor.
/ Landfill Compactor / LANDFILL COMPACTOR: Daily Inspection
LANDFILL COMPACTOR: Systems and Service
An overview of the service features of the Landfill Compactor.
/ Landfill Compactor / LANDFILL COMPACTOR: Systems and Service
LANDFILL COMPACTOR: Startup and Shutdown
This video walks you though how to start the Landfill Compactor for the workday and how to shut it down when the day is over.
/ Landfill Compactor / LANDFILL COMPACTOR: Startup and Shutdown
972M XE: Inspect
A proper daily walk around inspection of the machine prior to operation.
/ 972M XE / 972M XE: Inspect
972M XE: Systems
The overview of the fundamentals and service of the electric and hydraulic operating systems of the D6 XE.
/ 972M XE / 972M XE: Systems
972M XE: Operation Overview
This operation overview module covers the foundational knowledge needed to operate the machine.
/ 972M XE / 972M XE: Operation Overview
972M XE: Safety
This video has a focus on the exploration of the safety components of the machine.
/ 972M XE / 972M XE: Safety
972M XE FEATURE FOCUS: Payload Scale, Ride Control, and Engine Idle Timer
The focus of this video demonstrates the unique features of the machine such as payload scale, ride control & engine idle timer.
/ 972M XE / 972M XE FEATURE FOCUS: Payload Scale, Ride Control, and Engine Idle Timer
972M XE: Operation Detail
This module provides a complete demonstration on the function and operation of the payload scale feature.
/ 972M XE / 972M XE: Operation Detail
MHEX FEATURE FOCUS: Lift Assist
Overview of the Next Gen Lift Assist feature for the CAT Hydraulic Excavator
/ Next Gen HEX Medium / MHEX FEATURE FOCUS: Lift Assist
MEDIUM HEX: Assist Tune Calibration
A detailed step by step process of the Assist Fine Tune Calibration, which needs to be conducted for every new attachment added to the excavator.
/ Next Gen HEX Medium / MEDIUM HEX: Assist Tune Calibration
MEDIUM HEX: Machine Display Settings
A look at changing machine settings and shortcuts in the Next Gen monitor.
/ Next Gen HEX Medium / MEDIUM HEX: Machine Display Settings
MEDIUM HEX: Bucket Measure Up
Learn how to conduct a Bucket Measure Up, which is needed to take advantage of all the technologies in the Next Gen excavator.
/ Next Gen HEX Medium / MEDIUM HEX: Bucket Measure Up
MEDIUM HEX: Monitor Setup
A basic layout and navigation of the Next Gen monitor panel, as well as inputting some of the most useful custom settings.
/ Next Gen HEX Medium / MEDIUM HEX: Monitor Setup
MEDIUM HEX: Systems Technology
An overview of the basic elements of the Next Gen E-fence system.
/ Next Gen HEX Medium / MEDIUM HEX: Systems Technology
MEDIUM HEX: Safety
Exploration of the safety components of the CAT medium hydraulic excavator (320-335), including operator ergonomics and emergency features.
/ Next Gen HEX Medium / MEDIUM HEX: Safety
MEDIUM HEX: Daily Inspection
A proper daily walk around inspection of the medium hydraulic excavator (320-335) prior to operation.
/ Next Gen HEX Medium / MEDIUM HEX: Daily Inspection
MEDIUM HEX: Payload Calibration
An in-depth demonstration and calibration of the Payload Assist feature for Next Gen Medium and Large excavators.
/ Next Gen HEX Medium / MEDIUM HEX: Payload Calibration
MHEX FEATURE FOCUS: Efficiency Features
How to set up and use Cat Swing Assist, Cat Bucket Assist, and Cat Boom Assist for greater work efficiency in the Next Gen Hydraulic Excavator.
/ Next Gen HEX Medium / MHEX FEATURE FOCUS: Efficiency Features
MEDIUM HEX: Operations Overview
This module provides an overview of the cab controls, startup, basic movements, tool operation and proper shutdown procedure of the CAT medium excavator (320-335).
/ Next Gen HEX Medium / MEDIUM HEX: Operations Overview
MHEX FEATURE FOCUS: E-Fence
In-depth demonstration to setup and operate the CAT E-Fence system for all Next Gen medium and large hydraulic excavators
/ Next Gen HEX Medium / MHEX FEATURE FOCUS: E-Fence
MHEX FEATURE FOCUS: Grade Assist
A detailed look at setup and operation of the Grade Assist feature for the Next Gen excavators.
/ Next Gen HEX Medium / MHEX FEATURE FOCUS: Grade Assist
906-908M: FEATURE FOCUS: Creep Control
This video shows how to engage the Creep Control feature.
/ 906-908M / 906-908M: FEATURE FOCUS: Creep Control
906-908M: Operation Overview
A overview of the daily operation of the 906-908M.
/ 906-908M / 906-908M: Operation Overview
906-908M: Safety and Service
A exploration of the major operating systems of the machine.
/ 906-908M / 906-908M: Safety and Service
906-908M: Daily Inspection
Overview of a daily inspection for a compact wheel loader.
/ 906-908M / 906-908M: Daily Inspection
LARGE HEX: Machine Display Settings
A look at changing display settings and shortcuts on your Next Gen monitor.
/ Next Gen HEX Large / LARGE HEX: Machine Display Settings
LARGE HEX: Assist Fine Tune Calibration
This module contains a live demo of the assist fine tune calibration process that must be completed before a new attachment is added to an excavator.
/ Next Gen HEX Large / LARGE HEX: Assist Fine Tune Calibration
LARGE HEX: E-Fence Feature Setup
A demonstration of how to set up the new safety technology features of the Next Gen Large HEX, including e-floor, e-ceiling, and e-wall.
/ Next Gen HEX Large / LARGE HEX: E-Fence Feature Setup
LARGE HEX: Bucket Measure Up
Understanding how to conduct a Bucket Measure Up for the Next Gen Large Hydraulic Excavator.
/ Next Gen HEX Large / LARGE HEX: Bucket Measure Up
LARGE HEX: Operation Overview
The basic operations, including startup and shutdown procedures, for the Next Gen Large Hydraulic Excavators (336-395).
/ Next Gen HEX Large / LARGE HEX: Operation Overview
LARGE HEX: Efficiency Features
An overview of features of the Next Gen Large HEX.
/ Next Gen HEX Large / LARGE HEX: Efficiency Features
LARGE HEX: Preventative Maintenance
A look at the regular maintenance points for CAT Next Gen Large Hydraulic Excavators.
/ Next Gen HEX Large / LARGE HEX: Preventative Maintenance
LARGE HEX: Lift Assist
An overview of the lift assist function of the Next Gen Large HEX.
/ Next Gen HEX Large / LARGE HEX: Lift Assist
LARGE HEX: Safety
A review of basic safety features for the CAT Next Gen Large Hydraulic Excavators.
/ Next Gen HEX Large / LARGE HEX: Safety
LARGE HEX: Daily Inspection
This video goes over the daily walk around inspection of the CAT Large hydraulic excavators.
/ Next Gen HEX Large / LARGE HEX: Daily Inspection
LARGE HEX: Monitor Setup
An overview of the monitor setup on a Next Gen Large HEX
/ Next Gen HEX Large / LARGE HEX: Monitor Setup
LARGE HEX: Grade Assist
An overview of the grade assist features on the Next Gen Large HEX
/ Next Gen HEX Large / LARGE HEX: Grade Assist
LARGE HEX: Payload Calibration
Understanding the payload calibration on the Next Gen Large Hydraulic Excavator
/ Next Gen HEX Large / LARGE HEX: Payload Calibration
299D3: Inspect
Proper daily inspection of the machine before every shift or after every 10 hours of operation. Includes ground level walk-around, inspection of engine compartment and fluid levels.
/ 299D3 CTL / 299D3: Inspect
299D3: Systems
A overview of the compact track loader D3 series, track maintenance, and adjustment.
/ 299D3 CTL / 299D3: Systems
299D3: Operation Overview
A brief overview of the operator controls and basic operating functions of this machine, including startup, travel, and joystick controls.
/ 299D3 CTL / 299D3: Operation Overview
299D3 FEATURE FOCUS: Creep Control, Return to Dig, and Dual Self Level
The following unique features are demonstrated in this module: Creep Control, Return to Dig, and Dual Self Level.
/ 299D3 CTL / 299D3 FEATURE FOCUS: Creep Control, Return to Dig, and Dual Self Level
299D3: Safety
This module is an exploration of the safety components of the machine, including operator ergonomics and emergency features.
/ 299D3 CTL / 299D3: Safety
SMALL WHEEL LOADER: Safety
Safety tips and features for the CAT Small Wheel Loader (926M-938M).
/ Wheel Loader Small / SMALL WHEEL LOADER: Safety
SMALL WHEEL LOADER: Preventive Maintenance
Preventative Maintenance tips and features for the CAT Small Wheel Loader (926M-938M).
/ Wheel Loader Small / SMALL WHEEL LOADER: Preventive Maintenance
SWL FEATURE FOCUS: Rim Pull
A guide on how to set the rim pull control feature on your CAT Small Wheel Loader.
/ Wheel Loader Small / SWL FEATURE FOCUS: Rim Pull
SWL FEATURE FOCUS: Kick-Outs, Snubbing, Wrap-Outs, and Soft Detents
An in-depth look at the kick-out, snubbing, wrap-out, and soft detents features on the Small Wheel Loader.
/ Wheel Loader Small / SWL FEATURE FOCUS: Kick-Outs, Snubbing, Wrap-Outs, and Soft Detents
SWL FEATURE FOCUS: Customization
Step by step instructions on how to customize the operational feel of your machine, including the power train and implement controls.
/ Wheel Loader Small / SWL FEATURE FOCUS: Customization
SWL FEATURE FOCUS: Hystat Powertrain Operation
Operator tips to get the most out of the CAT Small Wheel Loader hystat powertrain.
/ Wheel Loader Small / SWL FEATURE FOCUS: Hystat Powertrain Operation
SWL FEATURE FOCUS: Creep Control, Engine Idle Shutdown, and DEF Alarm
An overview of the Small Wheel Loader creep control feature, engine idle shutdown, and DEF alarm system.
/ Wheel Loader Small / SWL FEATURE FOCUS: Creep Control, Engine Idle Shutdown, and DEF Alarm
K Series Large Wheel Loader: Operator Controls
An in-depth look into the operator controls of the K- Series Large Wheel Loader.
/ Wheel Loader Large / K Series Large Wheel Loader: Operator Controls
K Series Large Wheel Loader: Basic Operator Tips
An overview of the basic operator tips on the K Series Large Wheel Loader.
/ Wheel Loader Large / K Series Large Wheel Loader: Basic Operator Tips
K Series Large Wheel Loader: Preventive Maintenance
A look at some preventive maintenance features on the K Series Large Wheel Loader.
/ Wheel Loader Large / K Series Large Wheel Loader: Preventive Maintenance
Off-Highway Truck: Fatal Safety Mistakes
In this classic video from CAT, we review some general safety guidelines for the Off-Highway Truck and how to avoid mistakes that can be fatal.
/ Off-Highway Truck / Off-Highway Truck: Fatal Safety Mistakes
Off-Highway Truck: Daily Inspection
A thorough daily inspection of the CAT Off-Highway Truck, presented by MSHA.
/ Off-Highway Truck / Off-Highway Truck: Daily Inspection
Off-Highway Truck: Preventive Maintenance Walkaround
A brief overview of the preventive maintenance and safety features on the CAT 770G and 772G Off-Highway Trucks.
/ Off-Highway Truck / Off-Highway Truck: Preventive Maintenance Walkaround
Excavation Safety (Part 2: Trench Protection)
When working in a trench it is critical to use the proper protection equipment. This module is the second in a three part examination of excavation and trenching safety.
/ Excavation and Trenching Safety / Excavation Safety (Part 2: Trench Protection)
Excavation Safety (Part 3: Underground Hazards)
On any excavation site, hazards from underground utilities can exist putting operators and workers in danger. In this final excavation module, learn how to identify these hazards before you dig and what to do if you accidentally encounter them.
/ Excavation and Trenching Safety / Excavation Safety (Part 3: Underground Hazards)
Scaffolding
An overview of OSHA’s safety standards for supported and suspended scaffold systems.
/ Off The Ground / Scaffolding
Ladders and Stairways (Part 1)
The first in a two part series on safe practices on or around ladders and stairways.
/ Off The Ground / Ladders and Stairways (Part 1)
Ladders and Stairways (Part 2)
The second in a two part series on safe practices on or around ladders and stairways.d
/ Off The Ground / Ladders and Stairways (Part 2)
Know Your Rights
Identifying the safety responsibilities of both employers and employees and knowing the rights OSHA gives to workers.
/ Introduction to OSHA / Know Your Rights
Standards and General Safety
Understanding how to identify OSHA’s General Safety Standards and implement them on the job site.
/ Introduction to OSHA / Standards and General Safety
OSHA's Responsibility
Examining OSHA’s process for inspecting and ensuring workplace safety standards.
/ Introduction to OSHA / OSHA's Responsibility
What is OSHA
An overview of the history and duties of the Occupational Safety and Health Administration.
/ Introduction to OSHA / What is OSHA
What is a Hazard?
Hazards are everywhere on a construction site. In order to stay safe, every worker must be able to identify the hazards around them and then consciously assess the risk of each.
/ Focus Four Hazards / What is a Hazard?
Struck By
Learn to recognize and prevent Struck-by hazards on a construction site.
/ Focus Four Hazards / Struck By
Risk Tolerance
Why do we take risks? Preventing dangerous habits from forming can prevent serious injury or even death on a job.
/ Focus Four Hazards / Risk Tolerance
Fall Prevention Part 1
This module explores the first, and deadliest, of the “Focus  Four” Hazards: Slips, Trips and Falls.
/ Focus Four Hazards / Fall Prevention Part 1
Fall Prevention Part 2 and Fall Arrest Systems
If protection measures fail and a fall happens, a properly used personal fall arrest system can save your life.
/ Focus Four Hazards / Fall Prevention Part 2 and Fall Arrest Systems
Electrical Hazards Part 1
The first of a two-part study on Construction Electrical Safety; from dangers to prevention.
/ Focus Four Hazards / Electrical Hazards Part 1
Electrical Hazards Part 2
The second of a two-part study on Construction Electrical Safety; from dangers to prevention.
/ Focus Four Hazards / Electrical Hazards Part 2
Caught Between
Learn to recognize and prevent Caught-between and Caught-in hazards on a construction site.
/ Focus Four Hazards / Caught Between
Tool Safety: Power Tools
In this module you will learn how to properly select, inspect and safely handle the most common power tools found in construction.
/ Tools: Hand and Power / Tool Safety: Power Tools
Tool Safety: Hand Tools
In this module you will learn how to properly select, inspect and safely handle the most common hand tools found in construction.
/ Tools: Hand and Power / Tool Safety: Hand Tools
PPE: Personal Protective Equipment (Part 1)
PPE is much more than helmets, goggles and gloves. In this final module on workplace PPE, we’ll examine how to choose the right protective clothing, how to keep it clean, and how your body tells you that additional PPE may be necessary.
/ PPE and Lifesaving Equipment / PPE: Personal Protective Equipment (Part 1)
PPE: Personal Protective Equipment (Part 2)
All PPE should be safely designed and constructed and kept in a clean and reliable fashion. In this second part we’ll focus on ways PPE can keep you safe from damaging noise, airborne hazards and potential injury to your hands and arms.
/ PPE and Lifesaving Equipment / PPE: Personal Protective Equipment (Part 2)
PPE: Personal Protective Equipment (Part 3)
When engineering or workplace safety controls fail or are not feasible, Personal Protective Equipment, (or “PPE”) can be the last line of defense against an injury. This module covers the basics of construction PPE, including selecting the right head and eye protection.
/ PPE and Lifesaving Equipment / PPE: Personal Protective Equipment (Part 3)
Pathogen Prevention
This module explores the ways dangerous pathogens can spread, both airborne and bloodborne, and the prevention measures workers can take for each.
/ Health Hazards in Construction / Pathogen Prevention
Housekeeping & Distractions
Many injuries can be prevented by incorporating some simple and effective habits, including basic housekeeping procedures and staying focused on the job.
/ Health Hazards in Construction / Housekeeping & Distractions
Heat & Cold Stress
Working in extreme hot and cold environments often cannot be avoided. In those situations, taking the necessary precautions can save your life.
/ Health Hazards in Construction / Heat & Cold Stress
Chemical Hazards
Physical exposure to chemical and toxic substances pose a wide range of potential hazards to workers in construction.
/ Health Hazards in Construction / Chemical Hazards
Biological Hazards
The biological hazards workers face can include bacteria, viruses, fungi, vegetation and even animals. This module describes how to identify each and what to do when you encounter it.t
/ Health Hazards in Construction / Biological Hazards
Airborne Hazards
You may not see them, but potentially fatal hazards can exist in the air you breathe. This module explores the most common, and dangerous, airborne hazards found on a construction job site.
/ Health Hazards in Construction / Airborne Hazards
Fire Protection
Because fire is one of the most powerful elements on the planet, it’s essential that we are aware of the risk it presents and the ways we can prevent it from getting out of control.
/ Fire Protection / Fire Protection
Materials Handling (Part 1)
The efficient moving, handling and storage of materials are vital to the construction industry. This is the first of two modules examining the safe practices for materials handling to avoid costly injuries.
/ Materials Handling / Materials Handling (Part 1)
Materials Handling (Part 2)
This module continues the discussion of safe practices for materials handling, including hoisting heavy objects and proper storage of raw materials.
/ Materials Handling / Materials Handling (Part 2)
Part 1: We All Have Mental Health
This is the first in a five part series of the IBEAM (Ideal Body Environment and Mind) program designed to provide fundamental awareness and information on mental health challenges and suicide issues. Presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness and Suicide Awareness Course / Part 1: We All Have Mental Health
Part 5: Preventing Suicide
In the U.S., the suicide rate is highest in the construction industry and is four times higher than the national average. In this module we explore the roles and steps to take in preventing suicide. Series presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness and Suicide Awareness Course / Part 5: Preventing Suicide
Spray It! Tack Distributor Demonstration
This module takes you to a live highway paving job as workers set up and spray tack coat from a distributor tank. A companion module to the LeeBoy tack buggy overview series.
/ Build It / The Road / Spray It! Tack Distributor Demonstration
Part 2: Taking Care: A Look at Mental Wellness
Our lifestyle and habits can directly impact our mental health. Just like we should exercise our bodies to keep our hearts, lungs, and other vital organs healthy, we also need to take care of our brains. Series presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness and Suicide Awareness Course / Part 2: Taking Care: A Look at Mental Wellness
Part 3: Construction: An Industry in Crisis
In this module, we discuss the higher rates of both mental illness and suicide occur in the construction industry in comparison to any other occupation. Series presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness and Suicide Awareness Course / Part 3: Construction: An Industry in Crisis
Part 4 Responding to a Mental Health Crisis
A mental health crisis is a situation where emotional distress becomes too great and normal day-to-day functions become impossible to complete on your own. In this module, we discuss signs to recognize distress and how you can take action to help. Series presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness and Suicide Awareness Course / Part 4 Responding to a Mental Health Crisis
Excavation Safety (Part 1: Trench Hazards)
Excavation and trenching are among the most hazardous construction operations. This module describes the safe work practices that can protect workers from cave-ins and other hazards when working in and around excavation sites.
/ Excavation and Trenching Safety / Excavation Safety (Part 1: Trench Hazards)
COVID-19 Guidelines
This module covers best practices for minimizing the risks and effects of SARS-CoV-2, the virus which causes the disease COVID-19. Levels of risk for occupational groups is discussed along with preventative measures to staying safe.
/ Compliance / Health / COVID-19 Guidelines
Abutment Pouring
This module teaches the proper pouring technique for bridges and what the properties of the concrete should be.
/ Build It / The Bridge / Abutment Pouring
Vac Truck: Operations
This module explains the proper operation of the VACUUM function for the truck.
/ Clear It / Clean Up / Vac Truck: Operations
Scissor Lift: Operation
This Union Concrete module covers the basic operations for the scissor lift truck.
/ Lift It / Elevated Work Platforms / Scissor Lift: Operation
Vac Truck: Wash It
This equipment module covers the basic operation of the high pressure washing function of the Vac Truck
/ Clear It / Waterworks / Vac Truck: Wash It
Non-Ionizing Radiation
Understanding what is non-ionizing radiation and the hazards it can cause.
/ Jobsite Hazards / Environmental / Non-Ionizing Radiation
Vac Truck: Inspect
This module demonstrates the proper inspection procedure required prior to operation of the vacuum truck.
/ Equipment Inspect / Vac Truck: Inspect
Measure Like a Pro
How do you measure up? In this module CAHill master carpenter Rick Klug advises newer carpenters how to select the right tape measure for the job and how to quickly and accurately measure your way around a construction site. The module also provides several helpful tips that will help even long-time construction pros get the most out of their measurement tools.
/ Tools / Hand Tools / Measure Like a Pro
Excavator: Components
This video will show the different components and how to use them on an excavator
/ Systems / Components / Excavator: Components
Track Time: Basics
This video describes different types of tracks for machines and what type of track to use in what situation.
/ Systems / Components / Track Time: Basics
Widener Components
This video module covers the key components and proper safety techniques when working with the road widener.
/ Systems / Components / Widener Components
Scissor Truck: Components
This Union Concrete module describes and demonstrates the major components of the scissor lift truck.
/ Systems / Components / Scissor Truck: Components
Vac Truck: Components
This module gives you a clear overview of the major components of the vacuum truck and their function.
/ Systems / Components / Vac Truck: Components
MWL FEATURE FOCUS: Payload Scales, Ride Control, and Engine Idle Timer
The Focus of this video demonstrates the unique features of the MWL such as payload scale, ride control, and engine idle timer.
/ Wheel Loader Medium / MWL FEATURE FOCUS: Payload Scales, Ride Control, and Engine Idle Timer
MEDIUM WHEEL LOADER: Preventive Maintenance
A look at several key preventive maintenance tips for the CAT Medium Wheel Loader family (950-982).
/ Wheel Loader Medium / MEDIUM WHEEL LOADER: Preventive Maintenance
MWL Feature Focus: Joystick Steering Control
Joystick steering can replace the traditional steering wheel (when equipped) on certain Medium Wheel Loader models. This module provides a brief overview of how it works.
/ Wheel Loader Medium / MWL Feature Focus: Joystick Steering Control
MWL FEATURE FOCUS: Ride Control
A demonstration on setting up and operating the Ride Control feature on CAT Medium Wheel Loaders.
/ Wheel Loader Medium / MWL FEATURE FOCUS: Ride Control
SMALL WHEEL LOADER: Daily Inspection
Step by step daily inspection walkaround for the CAT small wheel loader family.
/ Wheel Loader Small / SMALL WHEEL LOADER: Daily Inspection
SMALL WHEEL LOADER: Operation Overview
A step by step review of the startup and shutdown procedures for the CAT Small Wheel Loader, as well as a detailed look at the operator controls.
/ Wheel Loader Small / SMALL WHEEL LOADER: Operation Overview
Roll It! 101: Road Compactor Training Part 1
This is the first in a three part training on the basics of road compaction. Part 1 discusses the three key factors to consider when rolling asphalt and a review of the basic components of a tandem drum vibratory compactor.
/ Build It / The Road / Roll It! 101: Road Compactor Training Part 1
Roll It! 101: Road Compactor Training Part 2
This is the second in a three part training on the basics of road compaction. Part 2 explains how to conduct a daily walkaround inspection, safety considerations, and a quick demonstration of the basic rolling pattern.
/ Build It / The Road / Roll It! 101: Road Compactor Training Part 2
Roll It! 101: Road Compactor Training Part 3
This is the third in a three part training on the basics of road compaction. Part 3 breaks down factors to consider when rolling; including water, vibration, temperature, and mat thickness.
/ Build It / The Road / Roll It! 101: Road Compactor Training Part 3
Risk Tolerance
In this training you will learn how to assess risks and work as a team to help prevent work related incidents.
/ Site Leader / Daily Assessment / Risk Tolerance
Control Measures
This module for jobsite leaders will walk you through what measures you can control on a jobsite. As well as why you should take into consideration an employees experience and suggestions.
/ Site Leader / Daily Assessment / Control Measures


/ Build It /
Demolition
/ Clear It / Demolition
Material Hauling
/ Haul It / Material Hauling
Body
/ Personal Safety / Body
Emergency Response
/ Personal Safety / Emergency Response
Licensing
/ Compliance / Licensing
GPS
/ Plan It / GPS
Clean Up
/ Clear It / Clean Up
Earthworks
/ Clear It / Earthworks
Waterworks
/ Clear It / Waterworks
The Bridge
/ Build It / The Bridge
The Road
/ Build It / The Road
Tow Behind
/ Haul It / Tow Behind
Crane
/ Lift It / Crane
Fork Trucks
/ Lift It / Fork Trucks
Elevated Work Platforms
/ Lift It / Elevated Work Platforms
WZTC
/ Control It / WZTC
Daily Walk-Around
/ Equipment Inspect / Daily Walk-Around
Fluids
/ Systems / Fluids
Air and Cooling
/ Systems / Air and Cooling
Components
/ Systems / Components
Attach It
/ Tools / Attach It
Tool Maintenance
/ Tools / Tool Maintenance
Hand Tools
/ Tools / Hand Tools
PPE
/ Personal Safety / PPE
Environmental
/ Jobsite Hazards / Environmental
Focus Four
/ Jobsite Hazards / Focus Four
Above & Below
/ Jobsite Hazards / Above & Below
Sexual Harassment
/ Compliance / Sexual Harassment
Boundaries
/ Plan It / Boundaries
Tied Down
/ Haul It / Tied Down
Health
/ Compliance / Health
Daily Assessment
/ Site Leader / Daily Assessment
Mental Wellness and Suicide Awareness Course
/ IBEAM / Mental Wellness and Suicide Awareness Course
WZTC
/ Control It / WZTC
Plan It
This category shows the proper planning of a project through GPS and setting the proper boundaries.
Site Ops / Plan It
Build It
This category will teach how to build a bridge and road.
Site Ops / Build It
Lift It
This category shows how to work around and operate cranes, elevated work platforms, and fork trucks.
Site Ops / Lift It
Equipment Inspect
This category will show the proper way to inspect multiple vehicles and equipment in order to keep them safe
Iron / Equipment Inspect
Tools
This category teaches about hand tools, tool maintenance, and machine attachments.
Iron / Tools
Clear It
This category shows how to clear out a potential job site through removal of objects in the way.
Site Ops / Clear It
Haul It
This category will show the proper way to haul material, tie down objects and machines, and tow trailers and machines.
Site Ops / Haul It
Control It
This category teaches the proper way to control work zone traffic.
Site Ops / Control It
Systems
This category will teach you about components for different vehicles, cooling systems, and fluids for your vehicle.
Iron / Systems
Personal Safety
This category will teach you the proper set up and use of personal safety gear.
Safety / Personal Safety
Jobsite Hazards
This category will show how to safely navigate different types of hazards such as environmental, above and below, and focus four.
Safety / Jobsite Hazards
Compliance
This category guides you though different regulatory guidelines such as sexual harassment, COVID-19, and licensing.
Safety / Compliance
Transpo
This category shows material sheets for different Transpo products.
Material Sheets / Transpo
Watson Bowman Acme
This category shows material sheets for different Watson Bowman Acme products.
Material Sheets / Watson Bowman Acme
Excavation and Trenching Safety
This category shows the OSHA 10 regulations regarding excavation and trenching training.
OSHA / Excavation and Trenching Safety
Off The Ground
This category shows the OSHA 10 regulations regarding off the ground training.
OSHA / Off The Ground
Introduction to OSHA
This category is an introduction to OSHA 10 regulations and standards.
OSHA / Introduction to OSHA
Focus Four Hazards
This category shows the OSHA 10 regulations regarding focus four hazards training.
OSHA / Focus Four Hazards
Tools: Hand and Power
This category shows the OSHA 10 regulations regarding hand and power tools training.
OSHA / Tools: Hand and Power
PPE and Lifesaving Equipment
This category shows the OSHA 10 regulations regarding PPE and lifesaving equipment training.
OSHA / PPE and Lifesaving Equipment
Health Hazards in Construction
This category shows the OSHA 10 regulations regarding health hazards in construction.
OSHA / Health Hazards in Construction
Fire Protection
This category shows the OSHA 10 regulations regarding fire protection training.
OSHA / Fire Protection
Materials Handling
This category shows the OSHA 10 regulations regarding materials handling training.
OSHA / Materials Handling
Next Gen HEX Mini
This category shows how to safely operate, maintain, and inspect the Next Gen Hex Mini.
MiltonCAT / Next Gen HEX Mini
D6XE
This category shows how to safely operate, maintain, and inspect the D6XE.
MiltonCAT / D6XE
Wheel Loader Medium
This category shows how to safely operate, maintain, and inspect the Medium Wheel Loader.
MiltonCAT / Wheel Loader Medium
Articulating Dump Trucks
This category shows how to safely operate, maintain, and inspect the Articulating Dump Trucks.
MiltonCAT / Articulating Dump Trucks
Tier 4 Final
This Category shows what Tier 4 final is and how to properly maintain a machine with DEF.
MiltonCAT / Tier 4 Final
Landfill Compactor
This category shows how to safely operate, maintain, and inspect the Landfill Compactor.
MiltonCAT / Landfill Compactor
972M XE
This category shows how to safely operate, maintain, and inspect the 972M XE.
MiltonCAT / 972M XE
Next Gen HEX Medium
This category shows how to safely operate, maintain, and inspect the Next Gen HEX Medium.
MiltonCAT / Next Gen HEX Medium
906-908M
This category shows how to safely operate, maintain, and inspect the 906-908M.
MiltonCAT / 906-908M
Next Gen HEX Large
This category shows how to safely operate, maintain, and inspect the Next Gen HEX Large.
MiltonCAT / Next Gen HEX Large
299D3 CTL
This category shows how to safely operate, maintain, and inspect the 299D3 CTL.
MiltonCAT / 299D3 CTL
Wheel Loader Small
This category shows how to safely operate, maintain, and inspect the Small Wheel Loader.
MiltonCAT / Wheel Loader Small
Off-Highway Truck
This category shows how to safely operate, maintain, and inspect the Off-Highway Truck.
MiltonCAT / Off-Highway Truck
Wheel Loader Large
This category shows how to safely operate, maintain, and inspect the Large Wheel Loader.
MiltonCAT / Wheel Loader Large
Site Leader
This category teaches site leaders and foreman about hazards and regulations on a job site.
Safety / Site Leader
Polyset
This category shows material sheets for different Polyset products.
Material Sheets / Polyset
IBEAM
This category provides fundamental awareness and information on mental health challenges and suicide issues.
Safety / IBEAM
Site Ops
Site Ops
Safety
Safety
OSHA
OSHA
MiltonCAT
MiltonCAT
Material Sheets
Material Sheets
Iron
Iron
All
  • Site Ops
  • Safety
  • OSHA
  • MiltonCAT
  • Material Sheets
  • Iron
Search
Explore 40 categories
Plan It - Featured image
Site Ops
Plan It
This category shows the proper planning of a project through GPS and setting the proper boundaries.
Modules
Training details
Build It - Featured image
Site Ops
Build It
This category will teach how to build a bridge and road.
Modules
Training details
Lift It - Featured image
Site Ops
Lift It
This category shows how to work around and operate cranes, elevated work platforms, and fork trucks.
Modules
Training details
Equipment Inspect - Featured image
Iron
Equipment Inspect
This category will show the proper way to inspect multiple vehicles and equipment in order to keep them safe
Modules
Training details
Tools - Featured image
Iron
Tools
This category teaches about hand tools, tool maintenance, and machine attachments.
Modules
Training details
Clear It - Featured image
Site Ops
Clear It
This category shows how to clear out a potential job site through removal of objects in the way.
Modules
Training details
Haul It - Featured image
Site Ops
Haul It
This category will show the proper way to haul material, tie down objects and machines, and tow trailers and machines.
Modules
Training details
Control It - Featured image
Site Ops
Control It
This category teaches the proper way to control work zone traffic.
Modules
Training details
Systems - Featured image
Iron
Systems
This category will teach you about components for different vehicles, cooling systems, and fluids for your vehicle.
Modules
Training details
Personal Safety - Featured image
Safety
Personal Safety
This category will teach you the proper set up and use of personal safety gear.
Modules
Training details
Jobsite Hazards - Featured image
Safety
Jobsite Hazards
This category will show how to safely navigate different types of hazards such as environmental, above and below, and focus four.
Modules
Training details
Compliance - Featured image
Safety
Compliance
This category guides you though different regulatory guidelines such as sexual harassment, COVID-19, and licensing.
Modules
Training details
Transpo - Featured image
Material Sheets
Transpo
This category shows material sheets for different Transpo products.
Resources
Training details
Watson Bowman Acme - Featured image
Material Sheets
Watson Bowman Acme
This category shows material sheets for different Watson Bowman Acme products.
Resources
Training details
Excavation and Trenching Safety - Featured image
OSHA
Excavation and Trenching Safety
This category shows the OSHA 10 regulations regarding excavation and trenching training.
Modules
Training details
Off The Ground - Featured image
OSHA
Off The Ground
This category shows the OSHA 10 regulations regarding off the ground training.
Modules
Training details
Introduction to OSHA - Featured image
OSHA
Introduction to OSHA
This category is an introduction to OSHA 10 regulations and standards.
Modules
Training details
Focus Four Hazards - Featured image
OSHA
Focus Four Hazards
This category shows the OSHA 10 regulations regarding focus four hazards training.
Modules
Training details
Tools: Hand and Power - Featured image
OSHA
Tools: Hand and Power
This category shows the OSHA 10 regulations regarding hand and power tools training.
Modules
Training details
PPE and Lifesaving Equipment - Featured image
OSHA
PPE and Lifesaving Equipment
This category shows the OSHA 10 regulations regarding PPE and lifesaving equipment training.
Modules
Training details
Health Hazards in Construction - Featured image
OSHA
Health Hazards in Construction
This category shows the OSHA 10 regulations regarding health hazards in construction.
Modules
Training details
Fire Protection - Featured image
OSHA
Fire Protection
This category shows the OSHA 10 regulations regarding fire protection training.
Modules
Training details
Materials Handling - Featured image
OSHA
Materials Handling
This category shows the OSHA 10 regulations regarding materials handling training.
Modules
Training details
Next Gen HEX Mini - Featured image
MiltonCAT
Next Gen HEX Mini
This category shows how to safely operate, maintain, and inspect the Next Gen Hex Mini.
Modules
Training details
D6XE - Featured image
MiltonCAT
D6XE
This category shows how to safely operate, maintain, and inspect the D6XE.
Modules
Training details
Wheel Loader Medium - Featured image
MiltonCAT
Wheel Loader Medium
This category shows how to safely operate, maintain, and inspect the Medium Wheel Loader.
Modules
Training details
Articulating Dump Trucks - Featured image
MiltonCAT
Articulating Dump Trucks
This category shows how to safely operate, maintain, and inspect the Articulating Dump Trucks.
Modules
Training details
Tier 4 Final - Featured image
MiltonCAT
Tier 4 Final
This Category shows what Tier 4 final is and how to properly maintain a machine with DEF.
Modules
Training details
Landfill Compactor - Featured image
MiltonCAT
Landfill Compactor
This category shows how to safely operate, maintain, and inspect the Landfill Compactor.
Modules
Training details
972M XE - Featured image
MiltonCAT
972M XE
This category shows how to safely operate, maintain, and inspect the 972M XE.
Modules
Training details
Next Gen HEX Medium - Featured image
MiltonCAT
Next Gen HEX Medium
This category shows how to safely operate, maintain, and inspect the Next Gen HEX Medium.
Modules
Training details
906-908M - Featured image
MiltonCAT
906-908M
This category shows how to safely operate, maintain, and inspect the 906-908M.
Modules
Training details
Next Gen HEX Large - Featured image
MiltonCAT
Next Gen HEX Large
This category shows how to safely operate, maintain, and inspect the Next Gen HEX Large.
Modules
Training details
299D3 CTL - Featured image
MiltonCAT
299D3 CTL
This category shows how to safely operate, maintain, and inspect the 299D3 CTL.
Modules
Training details
Wheel Loader Small - Featured image
MiltonCAT
Wheel Loader Small
This category shows how to safely operate, maintain, and inspect the Small Wheel Loader.
Modules
Training details
Off-Highway Truck - Featured image
MiltonCAT
Off-Highway Truck
This category shows how to safely operate, maintain, and inspect the Off-Highway Truck.
Modules
Training details
Wheel Loader Large - Featured image
MiltonCAT
Wheel Loader Large
This category shows how to safely operate, maintain, and inspect the Large Wheel Loader.
Modules
Training details
Site Leader - Featured image
Safety
Site Leader
This category teaches site leaders and foreman about hazards and regulations on a job site.
Modules
Training details
Polyset - Featured image
Material Sheets
Polyset
This category shows material sheets for different Polyset products.
Resources
Training details
IBEAM - Featured image
Safety
IBEAM
This category provides fundamental awareness and information on mental health challenges and suicide issues.
Modules
Training details

Looking to see aQuiReTM in action?

Get in touch and let our industry experts show you what makes aQuiRe™ the construction industry’s best training and safety tool.