Training Modules Library

GPS Rover Part 1
Understanding the setup and assembly of a TSC-3
/ Plan It / GPS / GPS Rover Part 1 GPS Rover Part 2
Connecting a TSC-3 and TSC-7 controller and understanding device operation
/ Plan It / GPS / GPS Rover Part 2 Sweeper: System Check
Proper methods for confirming broom attachment is connected and functioning properly; basic maneuvers for efficiently sweeping material.
/ Clear It / Clean Up / Sweeper: System Check Silt Fence It!
Proper installation of silt fence, focusing on site terrain and slope, water flow and projected soil disturbance during construction.
/ Clear It / Earthworks / Silt Fence It! Bulldozer: Rough Time
Using a bulldozer to perform basic rough grading work, preparing a site for fine grading and restoration.
/ Clear It / Earthworks / Bulldozer: Rough Time Excavator: Can You Dig it?
Basic operation for digging round and flat bottom trenches. Covers establishing proper pitch and grade, as well as safety fundamentals.
/ Clear It / Earthworks / Excavator: Can You Dig it? Trench It
Best-Practices when digging a trench, requirements for installing trench shields, understanding the importance of soil conditions.
/ Clear It / Earthworks / Trench It Tamp That: System Check
This module discusses the proper system check that a mechanic must perform to ensure that the attachment is functioning properly before sending it out for use in the field.
/ Tools / Attachments / Tamp That: System Check Culvert: Excavate
Expert approach for replacing a partially collapsed culvert. Outlines benching requirements, dewatering and basic methods to address scour.
/ Clear It / Drainage Structures / Culvert: Excavate Trimble Siteworks Part 1
GPS Software. Foundational overview of layout, stakeout and field measuring a project.
/ Plan It / GPS / Trimble Siteworks Part 1 Trimble Siteworks Part 2
GPS Software. Foundational overview of layout, stakeout and field measuring a project.
/ Plan It / GPS / Trimble Siteworks Part 2 Working Round the Railroad: Right of Way
It's critical for contracted construction crews to understand the job and safety requirements when doing work around an active railroad right of way.
/ Plan It / Boundaries / Working Round the Railroad: Right of Way Water is Solid: Hydro-Demolition
Demonstration on demolition using high pressure water, identification of key operating elements of the mechanical set up.
/ Clear It / Demolition / Water is Solid: Hydro-Demolition Crush It!
This module covers the best practices for crusher maintenance, safety protocols, LOTO and basic operations.
/ Clear It / Demolition / Crush It! Hammer Time: System Check
This module details the correct method for performing a system check of a hammer attachment prior to field use.r
/ System Check / Track Machines / Hammer Time: System Check Saw It: Downed Wood Clearing
Overview on proper and safe techniques for using a chainsaw. This modules covers various cutting techniques such as limbing and bucking, as well as various tools and accessories.
/ Clear It / Clean Up / Saw It: Downed Wood Clearing Snowblow It: Operate
Covers the basic operations and efficient control of the snowblower attachment.
/ Clear It / Clean Up / Snowblow It: Operate Pitch Perfect: Setting the Grade
Covering the basics on setting pitch and grade when operating a motor grader.
/ Build It / The Road / Pitch Perfect: Setting the Grade The Slope: Squeeze It
This earthworks module covers basic berm construction, working with highly saturated materials and stabilizing a slope.
/ Clear It / Earthworks / The Slope: Squeeze It The Slope: Aerate It
Techniques for safely and efficiently managing moisture rich material from dredging activities.
/ Clear It / Earthworks / The Slope: Aerate It The Slope: Lay It Out
Covers safe dozer operations on a slope and tactics when working with wet material.
/ Clear It / Earthworks / The Slope: Lay It Out Culvert: Place and Cover
Expert approach for replacing a partially collapsed culvert. Outlines how to properly backfill and compact the ground to prevent settling problems with the road.
/ Clear It / Drainage Structures / Culvert: Place and Cover Detention
Practical application of placing an underground detention system for drainage control. Covers basic surveying, installation approach and backfilling.
/ Clear It / Drainage Structures / Detention Lay It Under
This module covers trenching practices and placing underground drainage. Demonstration of the proper use of filter fabric, installing connectors and backfilling.
/ Clear It / Drainage Structures / Lay It Under Get Over It! Stream Crossing
This dynamic module covers the foundational design for a temporary stream crossing, various uses of material and proper maintenance of the crossing.
/ Clear It / Earthworks / Get Over It! Stream Crossing Just Dredge It!
Dredging is the process of excavating and removing moisture-rich material from an environment. This module covers key methods for actively managing materials.
/ Clear It / Earthworks / Just Dredge It! Just Dredge It: The Bank
This module will show you how to successfully grade the slope to reduce erosion and keep material from filling the channel.
/ Clear It / Earthworks / Just Dredge It: The Bank The Abutment: Forming!
Master overview of installing forms building an abutment wall on a bridge. Focuses on rebar elements; the use of spacers and wall ties; installing form walls and waterstops.
/ Build It / The Bridge / The Abutment: Forming! True or False: Falsework
Our master carpenter outlines the process of forming a bridge deck and demonstrates how to safely install falsework.
/ Build It / The Bridge / True or False: Falsework Deck Pans Part 3: Last SIP
Part 3, the final steps to installing the deck pans on a bridge, covers how to cut and place pans on an angle.au
/ Build It / The Bridge / Deck Pans Part 3: Last SIP Lowboy Disconnect
Expert lowboy driver explains the basics of a walk around inspection for a tractor trailer and key observations for pre-trip safety. Identification of components of the tractor.
/ Move It / Tow Behind / Lowboy Disconnect LeeBoy Tack Distributor Part 2
Loading and heating of the machine before operation
/ System Check / Paver / LeeBoy Tack Distributor Part 2 WTH is WZTC?
Definition of the basics for Work Zone Traffic Control as well as the responsibilities and methods used to communicate with the traveling public.
/ Control It / WZTC / WTH is WZTC? Motor Grader: Inspect
Complete walk-around and basic inspection procedure for the machine.
/ Operator Inspection / Daily Walk-Around / Motor Grader: Inspect Rigging Hardware: Inspection
Comprehensive overview of the different styles of rigging hardware and their uses.
/ Operator Inspection / Daily Walk-Around / Rigging Hardware: Inspection Tri Axle: Components
An examination of the working components of a triaxle dump truck. Such as the differentials, traction control and PTO.
/ System Check / Tri-axle Dump / Tri Axle: Components Sweep It: Attach
Identification of the working components of the attachment, the importance of proper hydraulic pressure and how to position the machine to properly hook up the broom.
/ Tools / Attachments / Sweep It: Attach Tamper: Attach
Details the tamper attachment and the proper procedure for connecting it to a machine. Covers basic preventative maintenance.
/ Tools / Attachments / Tamper: Attach CAT SkidSteer: Attachments
Operation Guide showing button controls for: cold planer, mulcher, wheel saw. [Resource only. No video.]
/ Tools / Attachments / CAT SkidSteer: Attachments Mini Mill: System Check
Functional check of the attachments operational system to ensure proper functioning. Content covers different cutting bits, grease points, controls for angling and rate of rotation.
/ Tools / Tool Maintenance / Mini Mill: System Check Its Pouring! Finishing It Out
Overview of techniques and best practices for performing finishing work on a bridge deck pour.
/ Build It / The Bridge / Its Pouring! Finishing It Out The Deck: Dry Run & Layout
This module provides pro-tips on measuring for haunch depth during a dry run to ensure proper deck thickness.
/ Build It / The Bridge / The Deck: Dry Run & Layout The Abutment: Pile Drive It! ("Get Your Footing")
This module covers the principles behind pile driving and how it reinforces the earth for building the abutment walls of the bridge.
/ Build It / The Bridge / The Abutment: Pile Drive It! ("Get Your Footing") Rebar
Overview on the basics in design, function and installation of rebar for tensile strength in a bridge deck.
/ Build It / The Bridge / Rebar Swinging Steel
Setting the steel girders for a temporary bridge. Demonstration of various rigging techniques.
/ Build It / The Bridge / Swinging Steel Little Pour
Outline of the process for a small-scale deck pour. Step-by-step demonstration of individual responsibilities and utilization of tools and equipment.
/ Build It / The Bridge / Little Pour Deck Pans Part 1: Take A SIP
Part 1 of correct deck pan installation. Detailed approach for proper measurements and weld placement, as well as pro-tips for installing angles.
/ Build It / The Bridge / Deck Pans Part 1: Take A SIP Deck Pans Part 2: SIP Carefully
Part 2, this covers all basic safety measures when cutting, welding and setting up to install Stay In Place forms for a bridge deck.
/ Build It / The Bridge / Deck Pans Part 2: SIP Carefully Its Pouring! Putting It In Place
Introduction to the process of pouring concrete for bridge deck construction.
/ Build It / The Bridge / Its Pouring! Putting It In Place Pave It! 101: Principles of Paving, Part 1
Laying a smooth asphalt mat requires consistency in paving speed, material flow, and temperature. This introduction to paving module provides a helpful primer for new road construction laborers and operators.
/ Build It / The Road / Pave It! 101: Principles of Paving, Part 1 The Widener: Operations
Explores the fundamentals for using a widener for road and shoulder work.
/ Build It / The Road / The Widener: Operations Curb It!
Setting granite curb in an urban setting, basic methods for establishing alignment and maintaining stabilization.
/ Build It / The Road / Curb It! Lowboy: Chain it Down
How to load and chain down a large, rubber tired machine. Includes rate charts, working load limits, demonstration of best practices, identification of tie-down points and risk reduction.
/ Move It / Tied Down / Lowboy: Chain it Down Tie It Down
Demonstration of how to use ratchet straps to secure a mixed load on flatbed trailer. Identification of proper tension and application for multiple straps.
/ Move It / Tied Down / Tie It Down Pre-Cast
Best practices when loading and securing precast concrete forms. Covers basic rigging methods for lifting multiple types of precast materials.
/ Move It / Tied Down / Pre-Cast Haul It! Tri Axle
This module is about basic material loading and hauling operations; discussion of gear shifting, dump controls and preventative maintenance routines.
/ Move It / Material Hauling / Haul It! Tri Axle Articulating Dump Truck
Inside and outside, a thorough review of the major working parts and components of the off-road haul truck. Proper operation and basic applications are covered.
/ Move It / Material Hauling / Articulating Dump Truck Haul It! Fuel Truck
Outline of the requirements for HAZMAT licensing in NYS and best practices for fueling equipment in the field. Focusing on safety and efficiency in the field.
/ Move It / Material Hauling / Haul It! Fuel Truck Haul Roads
The basics of why, how and where a haul road is used in an excavation project. Covers tips for maintaining a haul road and how to minimize disruption.
/ Move It / Material Hauling / Haul Roads Crafco Trail
How to safely load and operate a Crafco trailer mounted melter for laying down crack sealant.
/ Move It / Tow Behind / Crafco Trail LeeBoy Tack Distributer Part 1
Safety and inspection of the machine
/ System Check / Paver / LeeBoy Tack Distributer Part 1 LeeBoy Tack Distributor Part 3
Basic operations of the LeeBoy
/ System Check / Paver / LeeBoy Tack Distributor Part 3 LeeBoy Tack Distributor Part 4
Cleaning the machine and safely storing it
/ System Check / Paver / LeeBoy Tack Distributor Part 4 The Crane: License
The requirements and basics for how to obtain and maintain a crane license in NYS. Outlines testing fundamentals.
/ Compliance / Licensing / The Crane: License Crane Hand Signals
Covers the importance of communication between an operator and a ground person directing machine movements. Resource charts and live demonstration of hand signals for safe job site communication.
/ Control It / Signaling / Crane Hand Signals Forklift Training Part 1: Inspect
This module will walk you through how to Inspect a forklift before operation.
/ Lifts / Forklift Training / Forklift Training Part 1: Inspect Forklift Training Part 2: Basic Functions
This modules will show you all of the Basic Functions of a forklift.
/ Lifts / Forklift Training / Forklift Training Part 2: Basic Functions Forklift Training Part 3: Operation
This module will take you through all the Operation safety you need to know while using a forklift.
/ Lifts / Forklift Training / Forklift Training Part 3: Operation Forklift Training Part 4: Safety
This video will go over the best safety practices when operating a forklift.
/ Lifts / Forklift Training / Forklift Training Part 4: Safety Aerial Lift: Operation
In this module, master trainer Jim Jones demonstrates how to conduct a function test, understand the basic controls, and safely operate an aerial work platform (AWP) in the field.
/ Lifts / Platform Lifts / Aerial Lift: Operation Watch Out, Work Zones!
Highlighting the various hazards and dangers in a work zone for a worker and how to minimize personal risk.
/ Control It / WZTC / Watch Out, Work Zones! Hold it Down
A work zone traffic control module that focuses on the importance of properly weighting traffic control devices to prevent disruption from weather events.
/ Control It / WZTC / Hold it Down Taper It: Highway
The purpose of work zone traffic control is to provide a safe work area for workers within the roadway, while facilitating the safe and orderly flow of all road users (motorists, bicyclists and pedestrians) through the work zone.
/ Control It / WZTC / Taper It: Highway Portable Traffic Lights
Portable Traffic Lights are an ideal way to control traffic when a flag person is not available. In this module we will look at inspecting and setting up a portable traffic device on a temporary roadside work area.
/ Control It / Signaling / Portable Traffic Lights Flag it
Expert traffic control technician Jim Jones explains basic flagging procedures for work zone traffic control situations in rural and urban settings.
/ Control It / Signaling / Flag it Flagger Training Module 1: Intro to Traffic Control
In this first training module, certified trainer James Jones explains the qualifications and basic functions of traffic control flagger, as well as a review of the equipment and apparel needed to perform your duty.
/ Control It / Flagger Training / Flagger Training Module 1: Intro to Traffic Control Flagger Training Module 2: Taking Charge
When directing traffic, you're the boss. This module describes how a flagger properly handles critical interactions with drivers and pedestrians, including emergency situations on a construction site.
/ Control It / Flagger Training / Flagger Training Module 2: Taking Charge Flagger Training Module 3: Get Ready
This module covers three important components that need to be in place prior to traffic control: Personal Protection Equipment (PPE), Advanced Warning Signs, and an understanding of a flagger's station.
/ Control It / Flagger Training / Flagger Training Module 3: Get Ready Flagger Training Module 4: Directing Traffic
A flagger's primary job is to direct traffic safely through a construction site. This module provides instruction on the proper use of the Stop/Slow Paddle, red flags, hand signals, and two-way radios.
/ Control It / Flagger Training / Flagger Training Module 4: Directing Traffic Chainsaw: Inspect
This module teaches a healthy respect for and knowledge of the chainsaw's limits and proper maintenance. It will help the user effectively mitigate risks and stay safe.
/ Operator Inspection / Daily Walk-Around / Chainsaw: Inspect Excavator: Inspect
This module demonstrates the correct inspection of the excavator. Each element is identified with a full review of proper procedures.
/ Operator Inspection / Daily Walk-Around / Excavator: Inspect Lowboy Truck and Trailer: Inspect
Expert lowboy driver explains the basics of a walk around inspection for a tractor trailer and key observations for pre-trip safety. Identification of components of the tractor.
/ Operator Inspection / Daily Walk-Around / Lowboy Truck and Trailer: Inspect Triaxle Dump Truck: Inspect
Topics covered in this safety module include the correct procedure for a walk-around, daily inspection and proper procedures for WZTC if the truck breaks down.
/ Operator Inspection / Daily Walk-Around / Triaxle Dump Truck: Inspect Snow Blower
The pre-operation protocol that must be followed before operating the snow blower attachment. Also covers basic trouble shooting.
/ Operator Inspection / Daily Walk-Around / Snow Blower The Crane: Inspection
This module demonstrates the correct inspection of the crane. Each element is identified with a full review of proper procedures.
/ Operator Inspection / Daily Walk-Around / The Crane: Inspection Sling Inspection
Overview of the different types of slings and how to stay safe while using each type.
/ Operator Inspection / Daily Walk-Around / Sling Inspection Aerial Work Platform: Inspect
This module demonstrates how to conduct a thorough daily inspection of an aerial work platform.
/ Operator Inspection / Daily Walk-Around / Aerial Work Platform: Inspect DEF
The practical application and safety requirements for using Diesel Exhaust Fluid. Overview on how to keep contaminants from entering the fuel system.
/ System Check / Fluids / DEF Hydraulics 101
Expert overview on the function of hydraulic systems and proper maintenance practices. Focus: EXCAVATOR
/ System Check / Fluids / Hydraulics 101 Grease Points and Lubrication
Expert overview on the importance of applying grease to a machine. Definition of high-use components, key grease points and best practices.av
/ System Check / Fluids / Grease Points and Lubrication Cool It Down
Expert overview on the function of radiator systems. Details on proper maintenance and cleaning practices.o
/ System Check / Air and Cooling / Cool It Down MotorGrader: Components
Step by step overview of the major elements of the machine, the function and basic operating guidelines.
/ System Check / Motor Grader / MotorGrader: Components Crane: Conventional
Discusses the key differences between varies types of cranes and gives a basic overview of a conventional friction crane.r
/ System Check / Crane / Crane: Conventional The Crane: Hydraulic
Demonstration of the interior controls and industry best practices when operating a hydraulic crane.
/ System Check / Crane / The Crane: Hydraulic Paver: Component
The components of the paver, basic function of key elements and basic maintenance procedures.
/ System Check / Paver / Paver: Component Motor Grader: System Check
This module goes over the key functioning elements of the motor grader. It covers the important mechanical systems that need to be fired up prior to operation.
/ System Check / Motor Grader / Motor Grader: System Check Track Time: Maintenance
Identification of the key components of a track machine and preventative maintenance procedures.
/ System Check / Track Machines / Track Time: Maintenance Hammer Time: Attach
Outlines the correct method to hook up the attachment and covers basic preventative maintenance.
/ Tools / Attachments / Hammer Time: Attach Mini Mill: Attach
Attaching a mini mill head with Steve.
/ Tools / Attachments / Mini Mill: Attach Twist-A-Wrist Bucket Attach
Steve explains how to attach a twist-a-wrist.
/ Tools / Attachments / Twist-A-Wrist Bucket Attach Snow Blow It: Attach
How to engage the fusion coupler and connect the hydraulic and electric systems between a snow blower attachment and a CAT 938M.
/ Tools / Attachments / Snow Blow It: Attach Snow Blower Disconnect
How to disengage the fusion coupler and disconnect hydraulic and electric systems between a snow blower attachment and a CAT 938M.
/ Tools / Attachments / Snow Blower Disconnect LOTO
Demonstration of the situations when Lock Out Tag Out must be used. Best practices for engaging Lock Out Tag Out and preventative measures.
/ Tools / Tool Maintenance / LOTO Twist-A-Wrist System Check
Best practices when operating a machine with a twist-a-wrist  attachment.
/ Tools / Tool Maintenance / Twist-A-Wrist System Check Hammer Like A Pro
Workers have been using hammers for the past 30,000 years. Are you swinging like a caveman or hammering like a pro? In this tip-filled module, master carpenter Rick Klug reviews how to select the right hammer for the job while using it safely and effectively on a construction site. Along the way he shares numerous time-saving tricks and insights that he’s picked up over 45 years in the trade.
/ Like A Pro / Hammer Like A Pro Ergonomics and Back Injury Prevention
Back injuries are the leading cause of disability cases in the construction industry. In this module, CAHill's Carley Hill and safety expert James Jones, explore the benefits of workplace ergonomics and share helpful pro tips on how to keep your back working optimally for years to come.
/ Personal Safety / Body / Ergonomics and Back Injury Prevention Heat Stress
How to identify the signs of heat stress on the human body, and what to do if you see these signs.
/ Personal Safety / Body / Heat Stress Cold Stress
Best practices when working in near or below freezing conditions.
/ Personal Safety / Body / Cold Stress PPE Overview
This module identifies the value and importance of using the correct personal protection equipment.
/ Personal Safety / PPE / PPE Overview The Field: Pathogen Prevention
Pathogens, viruses and sickness can be prevented with best practices. This module covers methods in the field for protecting yourself, coworkers, and those at home.
/ Jobsite Hazards / Environmental / The Field: Pathogen Prevention Indoor: Pathogen Prevention
Due to the increased risk of sickness from COVID-19, this module provides training on higher levels of vigilance when maintaining and cleaning public buildings.
/ Jobsite Hazards / Environmental / Indoor: Pathogen Prevention Bloodborne Pathogens
This module will bring awareness to the potential dangers of bloodborne pathogens and the steps you can take to protect yourself from exposure.
/ Jobsite Hazards / Environmental / Bloodborne Pathogens Slips, Trips and Falls
Raise your awareness to recognize & remove fall hazards. This training defines the hazards so you understand how to reduce exposure to preventable falls.
/ Jobsite Hazards / Focus Four / Slips, Trips and Falls Caught Between
Maintaining safe practices on the job site to prevent caught between incidents or accidents is critical.
/ Jobsite Hazards / Focus Four / Caught Between Sexual Harassment V2
This module details several case studies considered unacceptable under the law, as well as examples of acceptable behavior in the workplace.
/ Compliance / Sexual Harassment / Sexual Harassment V2 Don't Zone Out
This module covers the risks of drowsy driving, environmental exposures and the importance of staying alert and aware of surroundings.
/ Personal Safety / Body / Don't Zone Out Respiratory Protection
Staying safe on the job with the correct respiratory PPE.
/ Personal Safety / PPE / Respiratory Protection Hearing Conservation
Protecting yourself from job hazards that can cause hearing loss
/ Personal Safety / PPE / Hearing Conservation Fire Protection & Extinguisher Use
Understanding how to use an extinguisher and how to protect ourselves from fire hazards
/ Personal Safety / Emergency Response / Fire Protection & Extinguisher Use Chemical Hazards
A construction site is filled with visible and invisible chemicals that can be harmful to workers. This module explores the most common types of dangerous chemical agents on a jobsite and how workers can protect themselves from exposure.
/ Jobsite Hazards / Environmental / Chemical Hazards Asbestos Awareness
Understanding how asbestos affects the body and how to protect ourselves.
/ Jobsite Hazards / Environmental / Asbestos Awareness Silica
The dangers of silica and how to prevent exposure
/ Jobsite Hazards / Environmental / Silica Indoor Housekeeping
This module provides an overview on internal housekeeping. It focuses on keeping the shop(s) and municipal buildings clean, and free of anything that can cause injury.
/ Jobsite Hazards / Environmental / Indoor Housekeeping Lead Safety
Understanding the dangers of being exposed to lead.
/ Jobsite Hazards / Environmental / Lead Safety Struck By
This module increases awareness of the risks associated with incidents involving job site equipment and workers. The focus is on how to prevent accidents by maintaining safe positioning and distances.
/ Jobsite Hazards / Focus Four / Struck By Confined Space
The Confined Space Safety module covers risks associated with entering and working in closed environments, as well as basic rescue procedures.
/ Jobsite Hazards / Above & Below / Confined Space Aerial Work Platform: Safety
An aerial work platform must never be operated without a proper understanding of safety. This module explains how to correctly put on a safety harness, and outlines the required safety guidelines when operating an AWP.
/ Jobsite Hazards / Above & Below / Aerial Work Platform: Safety Dig Safely Course: Part 1
This module discusses the proper procedures for One Call when doing excavation work. Covers pre-demolition meetings, advance notifications and submitting a ticket.
/ Jobsite Hazards / Above & Below / Dig Safely Course: Part 1 Dig Safely Course: Part 2
Review of tolerance zones, test hole depths and methods as well as removal depths to properly expose utilities.
/ Jobsite Hazards / Above & Below / Dig Safely Course: Part 2 Dig Safely Course: Part 3
Know your location: Finding the tolerance zone, understanding the requirements prior to excavation.
/ Jobsite Hazards / Above & Below / Dig Safely Course: Part 3 Dig Safely Course: Part 4
Know your location
/ Jobsite Hazards / Above & Below / Dig Safely Course: Part 4 Dig Safely Course: Part 5
Backfill
/ Jobsite Hazards / Above & Below / Dig Safely Course: Part 5 What is a Hazard?
This module overviews the safety precautions a person should take when dealing with hazards on the job.
/ Site Leader / Daily Assessment / What is a Hazard? Sexual Harassment V1
This module covers the definition and terms identified as sexual harassment. Outlining the process for filing a complaint, as well as who is protected under the law.
/ Compliance / Sexual Harassment / Sexual Harassment V1 Keeping Your CDL
Overview of the basic requirements to keep your Commercial Drivers License (CDL).
/ Compliance / Licensing / Keeping Your CDL Under The Lights: Overnight Highway Traffic Control
Night highway construction work brings a unique challenge for traffic control teams. This module follows an overnight traffic crew as they progressively bump out temporary channeling devices to block off three lanes of an expressway. Learn from an experienced supervisor on the proper use of a truck mounted attenuator, arrow board, portable light plant, and how a team works in sync to secure a new lane from high speed traffic under the work lights.
/ Control It / WZTC / Under The Lights: Overnight Highway Traffic Control MINI HEX: Safety
Exploration of the safety components of the machine, including operator ergonomics and emergency features.
/ Next Gen HEX Mini / MINI HEX: Safety MINI HEX: Inspect
A proper pre-shift walk around and machine inspection procedure of the Next Gen HEX Mini.
/ Next Gen HEX Mini / MINI HEX: Inspect MINI HEX: Assist Calibration
This module goes over how to use the assist calibration in the Next Gen HEX Mini.
/ Next Gen HEX Mini / MINI HEX: Assist Calibration MINI HEX: Operations Overview
A general overview of the Next Gen HEX Mini operations including cab controls, start up, basic movements and tool operations.
/ Next Gen HEX Mini / MINI HEX: Operations Overview MINI HEX: Systems
The exploration of the major operating systems, safety considerations, and key areas of scheduled service for the Next Gen HEX Mini.
/ Next Gen HEX Mini / MINI HEX: Systems MINI HEX FEATURE FOCUS: Monitor
This module highlights how to use the monitor component of the machine.
/ Next Gen HEX Mini / MINI HEX FEATURE FOCUS: Monitor MINI HEX FEATURE FOCUS: Stick Steer
A demonstration of the unique Stick Steer feature on the Mini HEX and its application.
/ Next Gen HEX Mini / MINI HEX FEATURE FOCUS: Stick Steer D6XE: Systems
The overview of the fundamentals and service of the electric and hydraulic operating systems of the D6 XE.
/ D6XE / D6XE: Systems D6XE FEATURE FOCUS: Operators Monitor, Seat Controls, and Waster Handler Package
This module provides training on the unique features of the D6XE such as the operators monitor, seat controls and waster handler package (if applicable).
/ D6XE / D6XE FEATURE FOCUS: Operators Monitor, Seat Controls, and Waster Handler Package D6XE: Operation Overview
In this module we provide an overview of the operation of the machine.
/ D6XE / D6XE: Operation Overview D6XE: Safety
This video highlights the safety features of the D6XE.
/ D6XE / D6XE: Safety D6XE: Inspect
A proper walk around inspection of the machine prior to operation.
/ D6XE / D6XE: Inspect D6XE: Operate
This D6 XE operation overview provides resources on how to use the controls, speed settings, steering mechanisms as well as functional tips.
/ D6XE / D6XE: Operate MEDIUM WHEEL LOADER: Safety Features
A look at the safety tips and features found on the CAT Medium Wheel Loader family of machines.
/ Wheel Loader Medium / MEDIUM WHEEL LOADER: Safety Features MEDIUM WHEEL LOADER: Operation Overview
Basic startup, operation and shutdown procedure for the CAT Medium Wheel Loader family (950-966).
/ Wheel Loader Medium / MEDIUM WHEEL LOADER: Operation Overview MEDIUM WHEEL LOADER: Daily Inspection
A proper pre-shift walk around and machine inspection procedure for the Medium Wheel Loader.
/ Wheel Loader Medium / MEDIUM WHEEL LOADER: Daily Inspection ARTICULATED TRUCK: Daily Inspection
An overview of the daily walk around inspection for the Articulated Dump Truck (ADT).
/ Articulating Dump Trucks / ARTICULATED TRUCK: Daily Inspection ARTICULATED TRUCK FEATURE FOCUS: Automated Hoist
Understand the automated hoist function of the Articulating Dump Truck (ADT).
/ Articulating Dump Trucks / ARTICULATED TRUCK FEATURE FOCUS: Automated Hoist ARTICULATED TRUCK: Safety & Systems
This video is an overview of how to stay safe on the Articulating Dump Truck (ADT), and how to maintain the machine through service maintenance.
/ Articulating Dump Trucks / ARTICULATED TRUCK: Safety & Systems ARTICULATED TRUCK: Operations Overview
In this module gain knowledge of the operations of the Articulated Dump Truck (ADT).
/ Articulating Dump Trucks / ARTICULATED TRUCK: Operations Overview TIER 4 FINAL: DEF Testing and Quality Concerns
Testing the Diesel Exhaust Fluid and having the knowledge of what quality the fluid needs to be for optimal performance.
/ Tier 4 Final / TIER 4 FINAL: DEF Testing and Quality Concerns TIER 4 FINAL: DEF Maintenance Shutdown Process
The proper procedure for shutting down Tier 4 Final machines.
/ Tier 4 Final / TIER 4 FINAL: DEF Maintenance Shutdown Process LANDFILL COMPACTOR: Equipment Safety
An overview of the Landfill Compactor safety features.
/ Landfill Compactor / LANDFILL COMPACTOR: Equipment Safety LANDFILL COMPACTOR: Daily Inspection
An overview of the walk around daily inspection of the Landfill Compactor.
/ Landfill Compactor / LANDFILL COMPACTOR: Daily Inspection LANDFILL COMPACTOR: Systems and Service
An overview of the service features of the Landfill Compactor.
/ Landfill Compactor / LANDFILL COMPACTOR: Systems and Service LANDFILL COMPACTOR: Startup and Shutdown
This video walks you though how to start the Landfill Compactor for the workday and how to shut it down when the day is over.
/ Landfill Compactor / LANDFILL COMPACTOR: Startup and Shutdown 972M XE: Inspect
A proper daily walk around inspection of the machine prior to operation.
/ 972M XE / 972M XE: Inspect 972M XE: Systems
The overview of the fundamentals and service of the electric and hydraulic operating systems of the D6 XE.
/ 972M XE / 972M XE: Systems 972M XE: Operation Overview
This operation overview module covers the foundational knowledge needed to operate the machine.
/ 972M XE / 972M XE: Operation Overview 972M XE: Safety
This video has a focus on the exploration of the safety components of the machine.
/ 972M XE / 972M XE: Safety 972M XE FEATURE FOCUS: Payload Scale, Ride Control, and Engine Idle Timer
The focus of this video demonstrates the unique features of the machine such as payload scale, ride control & engine idle timer.
/ 972M XE / 972M XE FEATURE FOCUS: Payload Scale, Ride Control, and Engine Idle Timer 972M XE: Operation Detail
This module provides a complete demonstration on the function and operation of the payload scale feature.
/ 972M XE / 972M XE: Operation Detail MHEX FEATURE FOCUS: Lift Assist
Overview of the Next Gen Lift Assist feature for the CAT Hydraulic Excavator
/ Next Gen HEX Medium / MHEX FEATURE FOCUS: Lift Assist MEDIUM HEX: Assist Tune Calibration
A detailed step by step process of the Assist Fine Tune Calibration, which needs to be conducted for every new attachment added to the excavator.
/ Next Gen HEX Medium / MEDIUM HEX: Assist Tune Calibration MEDIUM HEX: Machine Display Settings
A look at changing machine settings and shortcuts in the Next Gen monitor.
/ Next Gen HEX Medium / MEDIUM HEX: Machine Display Settings MEDIUM HEX: Bucket Measure Up
Learn how to conduct a Bucket Measure Up, which is needed to take advantage of all the technologies in the Next Gen excavator.
/ Next Gen HEX Medium / MEDIUM HEX: Bucket Measure Up MEDIUM HEX: Monitor Setup
A basic layout and navigation of the Next Gen monitor panel, as well as inputting some of the most useful custom settings.
/ Next Gen HEX Medium / MEDIUM HEX: Monitor Setup MEDIUM HEX: Systems Technology
An overview of the basic elements of the Next Gen E-fence system.
/ Next Gen HEX Medium / MEDIUM HEX: Systems Technology MEDIUM HEX: Safety
Exploration of the safety components of the CAT medium hydraulic excavator (320-335), including operator ergonomics and emergency features.
/ Next Gen HEX Medium / MEDIUM HEX: Safety MEDIUM HEX: Daily Inspection
A proper daily walk around inspection of the medium hydraulic excavator (320-335) prior to operation.
/ Next Gen HEX Medium / MEDIUM HEX: Daily Inspection MEDIUM HEX: Payload Calibration
An in-depth demonstration and calibration of the Payload Assist feature for Next Gen Medium and Large excavators.
/ Next Gen HEX Medium / MEDIUM HEX: Payload Calibration MHEX FEATURE FOCUS: Efficiency Features
How to set up and use Cat Swing Assist, Cat Bucket Assist, and Cat Boom Assist for greater work efficiency in the Next Gen Hydraulic Excavator.
/ Next Gen HEX Medium / MHEX FEATURE FOCUS: Efficiency Features MEDIUM HEX: Operations Overview
This module provides an overview of the cab controls, startup, basic movements, tool operation and proper shutdown procedure of the CAT medium excavator (320-335).
/ Next Gen HEX Medium / MEDIUM HEX: Operations Overview MHEX FEATURE FOCUS: E-Fence
In-depth demonstration to setup and operate the CAT E-Fence system for all Next Gen medium and large hydraulic excavators
/ Next Gen HEX Medium / MHEX FEATURE FOCUS: E-Fence MHEX FEATURE FOCUS: Grade Assist
A detailed look at setup and operation of the Grade Assist feature for the Next Gen excavators.
/ Next Gen HEX Medium / MHEX FEATURE FOCUS: Grade Assist 906-908M: FEATURE FOCUS: Creep Control
This video shows how to engage the Creep Control feature.
/ 906-908M / 906-908M: FEATURE FOCUS: Creep Control 906-908M: Operation Overview
A overview of the daily operation of the 906-908M.
/ 906-908M / 906-908M: Operation Overview 906-908M: Safety and Service
A exploration of the major operating systems of the machine.
/ 906-908M / 906-908M: Safety and Service 906-908M: Daily Inspection
Overview of a daily inspection for a compact wheel loader.
/ 906-908M / 906-908M: Daily Inspection LARGE HEX: Machine Display Settings
A look at changing display settings and shortcuts on your Next Gen monitor.
/ Next Gen HEX Large / LARGE HEX: Machine Display Settings LARGE HEX: Assist Fine Tune Calibration
This module contains a live demo of the assist fine tune calibration process that must be completed before a new attachment is added to an excavator.
/ Next Gen HEX Large / LARGE HEX: Assist Fine Tune Calibration LARGE HEX: E-Fence Feature Setup
A demonstration of how to set up the new safety technology features of the Next Gen Large HEX, including e-floor, e-ceiling, and e-wall.
/ Next Gen HEX Large / LARGE HEX: E-Fence Feature Setup LARGE HEX: Bucket Measure Up
Understanding how to conduct a Bucket Measure Up for the Next Gen Large Hydraulic Excavator.
/ Next Gen HEX Large / LARGE HEX: Bucket Measure Up LARGE HEX: Operation Overview
The basic operations, including startup and shutdown procedures, for the Next Gen Large Hydraulic Excavators (336-395).
/ Next Gen HEX Large / LARGE HEX: Operation Overview LARGE HEX: Efficiency Features
An overview of features of the Next Gen Large HEX.
/ Next Gen HEX Large / LARGE HEX: Efficiency Features LARGE HEX: Preventative Maintenance
A look at the regular maintenance points for CAT Next Gen Large Hydraulic Excavators.
/ Next Gen HEX Large / LARGE HEX: Preventative Maintenance LARGE HEX: Lift Assist
An overview of the lift assist function of the Next Gen Large HEX.
/ Next Gen HEX Large / LARGE HEX: Lift Assist LARGE HEX: Safety
A review of basic safety features for the CAT Next Gen Large Hydraulic Excavators.
/ Next Gen HEX Large / LARGE HEX: Safety LARGE HEX: Daily Inspection
This video goes over the daily walk around inspection of the CAT Large hydraulic excavators.
/ Next Gen HEX Large / LARGE HEX: Daily Inspection LARGE HEX: Monitor Setup
An overview of the monitor setup on a Next Gen Large HEX
/ Next Gen HEX Large / LARGE HEX: Monitor Setup LARGE HEX: Grade Assist
An overview of the grade assist features on the Next Gen Large HEX
/ Next Gen HEX Large / LARGE HEX: Grade Assist LARGE HEX: Payload Calibration
Understanding the payload calibration on the Next Gen Large Hydraulic Excavator
/ Next Gen HEX Large / LARGE HEX: Payload Calibration 299D3: Inspect
Proper daily inspection of the machine before every shift or after every 10 hours of operation. Includes ground level walk-around, inspection of engine compartment and fluid levels.
/ 299D3 CTL / 299D3: Inspect 299D3: Systems
A overview of the compact track loader D3 series, track maintenance, and adjustment.
/ 299D3 CTL / 299D3: Systems 299D3: Operation Overview
A brief overview of the operator controls and basic operating functions of this machine, including startup, travel, and joystick controls.
/ 299D3 CTL / 299D3: Operation Overview 299D3 FEATURE FOCUS: Creep Control, Return to Dig, and Dual Self Level
The following unique features are demonstrated in this module: Creep Control, Return to Dig, and Dual Self Level.
/ 299D3 CTL / 299D3 FEATURE FOCUS: Creep Control, Return to Dig, and Dual Self Level 299D3: Safety
This module is an exploration of the safety components of the machine, including operator ergonomics and emergency features.
/ 299D3 CTL / 299D3: Safety SMALL WHEEL LOADER: Safety
Safety tips and features for the CAT Small Wheel Loader (926M-938M).
/ Wheel Loader Small / SMALL WHEEL LOADER: Safety SMALL WHEEL LOADER: Preventive Maintenance
Preventative Maintenance tips and features for the CAT Small Wheel Loader (926M-938M).
/ Wheel Loader Small / SMALL WHEEL LOADER: Preventive Maintenance SWL FEATURE FOCUS: Rim Pull
A guide on how to set the rim pull control feature on your CAT Small Wheel Loader.
/ Wheel Loader Small / SWL FEATURE FOCUS: Rim Pull SWL FEATURE FOCUS: Kick-Outs, Snubbing, Wrap-Outs, and Soft Detents
An in-depth look at the kick-out, snubbing, wrap-out, and soft detents features on the Small Wheel Loader.
/ Wheel Loader Small / SWL FEATURE FOCUS: Kick-Outs, Snubbing, Wrap-Outs, and Soft Detents SWL FEATURE FOCUS: Customization
Step by step instructions on how to customize the operational feel of your machine, including the power train and implement controls.
/ Wheel Loader Small / SWL FEATURE FOCUS: Customization SWL FEATURE FOCUS: Hystat Powertrain Operation
Operator tips to get the most out of the CAT Small Wheel Loader hystat powertrain.
/ Wheel Loader Small / SWL FEATURE FOCUS: Hystat Powertrain Operation SWL FEATURE FOCUS: Creep Control, Engine Idle Shutdown, and DEF Alarm
An overview of the Small Wheel Loader creep control feature, engine idle shutdown, and DEF alarm system.
/ Wheel Loader Small / SWL FEATURE FOCUS: Creep Control, Engine Idle Shutdown, and DEF Alarm K Series Large Wheel Loader: Operator Controls
An in-depth look into the operator controls of the K- Series Large Wheel Loader.
/ Wheel Loader Large / K Series Large Wheel Loader: Operator Controls K Series Large Wheel Loader: Basic Operator Tips
An overview of the basic operator tips on the K Series Large Wheel Loader.
/ Wheel Loader Large / K Series Large Wheel Loader: Basic Operator Tips K Series Large Wheel Loader: Preventive Maintenance
A look at some preventive maintenance features on the K Series Large Wheel Loader.
/ Wheel Loader Large / K Series Large Wheel Loader: Preventive Maintenance Off-Highway Truck: Fatal Safety Mistakes
In this classic video from CAT, we review some general safety guidelines for the Off-Highway Truck and how to avoid mistakes that can be fatal.
/ Off-Highway Truck / Off-Highway Truck: Fatal Safety Mistakes Off-Highway Truck: Daily Inspection
A thorough daily inspection of the CAT Off-Highway Truck, presented by MSHA.
/ Off-Highway Truck / Off-Highway Truck: Daily Inspection Off-Highway Truck: Preventive Maintenance Walkaround
A brief overview of the preventive maintenance and safety features on the CAT 770G and 772G Off-Highway Trucks.
/ Off-Highway Truck / Off-Highway Truck: Preventive Maintenance Walkaround Excavation Safety (Part 2: Trench Protection)
When working in a trench it is critical to use the proper protection equipment. This module is the second in a three part examination of excavation and trenching safety.
/ Excavation and Trenching Safety / Excavation Safety (Part 2: Trench Protection) Excavation Safety (Part 3: Underground Hazards)
On any excavation site, hazards from underground utilities can exist putting operators and workers in danger. In this final excavation module, learn how to identify these hazards before you dig and what to do if you accidentally encounter them.
/ Excavation and Trenching Safety / Excavation Safety (Part 3: Underground Hazards) Scaffolding
An overview of OSHA’s safety standards for supported and suspended scaffold systems.
/ Off The Ground / Scaffolding Ladders and Stairways (Part 1)
The first in a two part series on safe practices on or around ladders and stairways.
/ Off The Ground / Ladders and Stairways (Part 1) Ladders and Stairways (Part 2)
The second in a two part series on safe practices on or around ladders and stairways.d
/ Off The Ground / Ladders and Stairways (Part 2) Know Your Rights
Identifying the safety responsibilities of both employers and employees and knowing the rights OSHA gives to workers.
/ Introduction to OSHA / Know Your Rights Standards and General Safety
Understanding how to identify OSHA’s General Safety Standards and implement them on the job site.
/ Introduction to OSHA / Standards and General Safety OSHA's Responsibility
Examining OSHA’s process for inspecting and ensuring workplace safety standards.
/ Introduction to OSHA / OSHA's Responsibility What is OSHA
An overview of the history and duties of the Occupational Safety and Health Administration.
/ Introduction to OSHA / What is OSHA What is a Hazard?
Hazards are everywhere on a construction site. In order to stay safe, every worker must be able to identify the hazards around them and then consciously assess the risk of each.
/ Focus Four Hazards / What is a Hazard? Struck By
Learn to recognize and prevent Struck-by hazards on a construction site.
/ Focus Four Hazards / Struck By Risk Tolerance
Why do we take risks? Preventing dangerous habits from forming can prevent serious injury or even death on a job.
/ Focus Four Hazards / Risk Tolerance Fall Prevention Part 1
This module explores the first, and deadliest, of the “Focus  Four” Hazards: Slips, Trips and Falls.
/ Focus Four Hazards / Fall Prevention Part 1 Fall Prevention Part 2 and Fall Arrest Systems
If protection measures fail and a fall happens, a properly used personal fall arrest system can save your life.
/ Focus Four Hazards / Fall Prevention Part 2 and Fall Arrest Systems Electrical Hazards Part 1
The first of a two-part study on Construction Electrical Safety; from dangers to prevention.
/ Focus Four Hazards / Electrical Hazards Part 1 Electrical Hazards Part 2
The second of a two-part study on Construction Electrical Safety; from dangers to prevention.
/ Focus Four Hazards / Electrical Hazards Part 2 Caught Between
Learn to recognize and prevent Caught-between and Caught-in hazards on a construction site.
/ Focus Four Hazards / Caught Between Tool Safety: Power Tools
In this module you will learn how to properly select, inspect and safely handle the most common power tools found in construction.
/ Tools: Hand and Power / Tool Safety: Power Tools Tool Safety: Hand Tools
In this module you will learn how to properly select, inspect and safely handle the most common hand tools found in construction.
/ Tools: Hand and Power / Tool Safety: Hand Tools PPE: Personal Protective Equipment (Part 1)
PPE is much more than helmets, goggles and gloves. In this final module on workplace PPE, we’ll examine how to choose the right protective clothing, how to keep it clean, and how your body tells you that additional PPE may be necessary.
/ PPE and Lifesaving Equipment / PPE: Personal Protective Equipment (Part 1) PPE: Personal Protective Equipment (Part 2)
All PPE should be safely designed and constructed and kept in a clean and reliable fashion. In this second part we’ll focus on ways PPE can keep you safe from damaging noise, airborne hazards and potential injury to your hands and arms.
/ PPE and Lifesaving Equipment / PPE: Personal Protective Equipment (Part 2) PPE: Personal Protective Equipment (Part 3)
When engineering or workplace safety controls fail or are not feasible, Personal Protective Equipment, (or “PPE”) can be the last line of defense against an injury. This module covers the basics of construction PPE, including selecting the right head and eye protection.
/ PPE and Lifesaving Equipment / PPE: Personal Protective Equipment (Part 3) Pathogen Prevention
This module explores the ways dangerous pathogens can spread, both airborne and bloodborne, and the prevention measures workers can take for each.
/ Health Hazards in Construction / Pathogen Prevention Housekeeping & Distractions
Many injuries can be prevented by incorporating some simple and effective habits, including basic housekeeping procedures and staying focused on the job.
/ Health Hazards in Construction / Housekeeping & Distractions Heat & Cold Stress
Working in extreme hot and cold environments often cannot be avoided. In those situations, taking the necessary precautions can save your life.
/ Health Hazards in Construction / Heat & Cold Stress Chemical Hazards
Physical exposure to chemical and toxic substances pose a wide range of potential hazards to workers in construction.
/ Health Hazards in Construction / Chemical Hazards Biological Hazards
The biological hazards workers face can include bacteria, viruses, fungi, vegetation and even animals. This module describes how to identify each and what to do when you encounter it.t
/ Health Hazards in Construction / Biological Hazards Airborne Hazards
You may not see them, but potentially fatal hazards can exist in the air you breathe. This module explores the most common, and dangerous, airborne hazards found on a construction job site.
/ Health Hazards in Construction / Airborne Hazards Fire Protection
Because fire is one of the most powerful elements on the planet, it’s essential that we are aware of the risk it presents and the ways we can prevent it from getting out of control.
/ Fire Protection / Fire Protection Materials Handling (Part 1)
The efficient moving, handling and storage of materials are vital to the construction industry. This is the first of two modules examining the safe practices for materials handling to avoid costly injuries.
/ Materials Handling / Materials Handling (Part 1) Materials Handling (Part 2)
This module continues the discussion of safe practices for materials handling, including hoisting heavy objects and proper storage of raw materials.
/ Materials Handling / Materials Handling (Part 2) Part 1: We All Have Mental Health
This is the first in a five part series of the IBEAM (Ideal Body Environment and Mind) program designed to provide fundamental awareness and information on mental health challenges and suicide issues. Presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness and Suicide Awareness Course / Part 1: We All Have Mental Health Part 5: Preventing Suicide
In the U.S., the suicide rate is highest in the construction industry and is four times higher than the national average. In this module we explore the roles and steps to take in preventing suicide. Series presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness and Suicide Awareness Course / Part 5: Preventing Suicide Spray It! Tack Distributor Demonstration
This module takes you to a live highway paving job as workers set up and spray tack coat from a distributor tank. A companion module to the LeeBoy tack buggy overview series.
/ Build It / The Road / Spray It! Tack Distributor Demonstration Part 2: Taking Care: A Look at Mental Wellness
Our lifestyle and habits can directly impact our mental health. Just like we should exercise our bodies to keep our hearts, lungs, and other vital organs healthy, we also need to take care of our brains. Series presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness and Suicide Awareness Course / Part 2: Taking Care: A Look at Mental Wellness Part 3: Construction: An Industry in Crisis
In this module, we discuss the higher rates of both mental illness and suicide occur in the construction industry in comparison to any other occupation. Series presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness and Suicide Awareness Course / Part 3: Construction: An Industry in Crisis Part 4: Responding to a Mental Health Crisis
A mental health crisis is a situation where emotional distress becomes too great and normal day-to-day functions become impossible to complete on your own. In this module, we discuss signs to recognize distress and how you can take action to help. Series presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness and Suicide Awareness Course / Part 4: Responding to a Mental Health Crisis Excavation Safety (Part 1: Trench Hazards)
Excavation and trenching are among the most hazardous construction operations. This module describes the safe work practices that can protect workers from cave-ins and other hazards when working in and around excavation sites.
/ Excavation and Trenching Safety / Excavation Safety (Part 1: Trench Hazards) COVID-19 Guidelines
This module covers best practices for minimizing the risks and effects of SARS-CoV-2, the virus which causes the disease COVID-19. Levels of risk for occupational groups is discussed along with preventative measures to staying safe.
/ Compliance / Health / COVID-19 Guidelines Abutment Pouring
This module teaches the proper pouring technique for bridges and what the properties of the concrete should be.
/ Build It / The Bridge / Abutment Pouring Vac Truck: Operations
This module explains the proper operation of the VACUUM function for the truck.
/ Clear It / Clean Up / Vac Truck: Operations Scissor Lift: Operation
This Union Concrete module covers the basic operations for the scissor lift truck.
/ Lifts / Platform Lifts / Scissor Lift: Operation Vac Truck: Wash It
This equipment module covers the basic operation of the high pressure washing function of the Vac Truck
/ System Check / Vac Truck / Vac Truck: Wash It Non-Ionizing Radiation
Understanding what is non-ionizing radiation and the hazards it can cause.
/ Jobsite Hazards / Environmental / Non-Ionizing Radiation Vac Truck: Inspect
This module demonstrates the proper inspection procedure required prior to operation of the vacuum truck.
/ Operator Inspection / Vac Truck: Inspect Measure Like a Pro
How do you measure up? In this module CAHill master carpenter Rick Klug advises newer carpenters how to select the right tape measure for the job and how to quickly and accurately measure your way around a construction site. The module also provides several helpful tips that will help even long-time construction pros get the most out of their measurement tools.
/ Like A Pro / Measure Like a Pro Excavator: Components
This video will show the different components and how to use them on an excavator
/ System Check / Track Machines / Excavator: Components Track Time: Basics
This video describes different types of tracks for machines and what type of track to use in what situation.
/ System Check / Track Machines / Track Time: Basics Widener Components
This video module covers the key components and proper safety techniques when working with the road widener.
/ System Check / Paver / Widener Components Scissor Truck: Components
This Union Concrete module describes and demonstrates the major components of the scissor lift truck.
/ Lifts / Platform Lifts / Scissor Truck: Components Vac Truck: Components
This module gives you a clear overview of the major components of the vacuum truck and their function.
/ System Check / Vac Truck / Vac Truck: Components MWL FEATURE FOCUS: Payload Scales, Ride Control, and Engine Idle Timer
The Focus of this video demonstrates the unique features of the MWL such as payload scale, ride control, and engine idle timer.
/ Wheel Loader Medium / MWL FEATURE FOCUS: Payload Scales, Ride Control, and Engine Idle Timer MEDIUM WHEEL LOADER: Preventive Maintenance
A look at several key preventive maintenance tips for the CAT Medium Wheel Loader family (950-982).
/ Wheel Loader Medium / MEDIUM WHEEL LOADER: Preventive Maintenance MWL Feature Focus: Joystick Steering Control
Joystick steering can replace the traditional steering wheel (when equipped) on certain Medium Wheel Loader models. This module provides a brief overview of how it works.
/ Wheel Loader Medium / MWL Feature Focus: Joystick Steering Control MWL FEATURE FOCUS: Ride Control
A demonstration on setting up and operating the Ride Control feature on CAT Medium Wheel Loaders.
/ Wheel Loader Medium / MWL FEATURE FOCUS: Ride Control SMALL WHEEL LOADER: Daily Inspection
Step by step daily inspection walkaround for the CAT small wheel loader family.
/ Wheel Loader Small / SMALL WHEEL LOADER: Daily Inspection SMALL WHEEL LOADER: Operation Overview
A step by step review of the startup and shutdown procedures for the CAT Small Wheel Loader, as well as a detailed look at the operator controls.
/ Wheel Loader Small / SMALL WHEEL LOADER: Operation Overview Roll It! 101: Road Compactor Training Part 1
This is the first in a three part training on the basics of road compaction. Part 1 discusses the three key factors to consider when rolling asphalt and a review of the basic components of a tandem drum vibratory compactor.
/ Build It / The Road / Roll It! 101: Road Compactor Training Part 1 Roll It! 101: Road Compactor Training Part 2
This is the second in a three part training on the basics of road compaction. Part 2 explains how to conduct a daily walkaround inspection, safety considerations, and a quick demonstration of the basic rolling pattern.
/ Build It / The Road / Roll It! 101: Road Compactor Training Part 2 Roll It! 101: Road Compactor Training Part 3
This is the third in a three part training on the basics of road compaction. Part 3 breaks down factors to consider when rolling; including water, vibration, temperature, and mat thickness.
/ Build It / The Road / Roll It! 101: Road Compactor Training Part 3 Risk Tolerance
In this training you will learn how to assess risks and work as a team to help prevent work related incidents.
/ Site Leader / Daily Assessment / Risk Tolerance Control Measures
This module for jobsite leaders will walk you through what measures you can control on a jobsite, as well as why you should take into consideration an employee's experience and suggestions.
/ Site Leader / Daily Assessment / Control Measures Flagger Training Module 5: Flagging Scenarios
This final module explains how to direct traffic in unique conditions, including flagging around curves in the road, hills, one-person operation, night flagging, and changes in the weather.
/ Control It / Flagger Training / Flagger Training Module 5: Flagging Scenarios Pave It! 101: Principles of Paving, Part 2
This second part introduction to paving module explains how a crew works together to lay asphalt, including efficiency, communication, and safety considerations.
/ Build It / The Road / Pave It! 101: Principles of Paving, Part 2 Advance Warning Area
Learn about elements contained in the first section of a work zone: the Advance Warning Area, and general MUTCD guidelines about warning sign materials, mounting height, size, placement, installation, and more.
/ Control It / WZTC / Advance Warning Area Toolbox Talks: Safe Cellphone Usage
Mobile phones have become increasingly common around construction sites, providing useful benefits, while also creating new risks. Discover industry practices on how your crew can avoid a phone related safety incident while at work.
/ Site Leader / Toolbox Talks / Toolbox Talks: Safe Cellphone Usage Before You Tow: Trailer Hookup and PreTrip Inspection
Step by step demonstration on how to properly hook up a trailer to a ball or pintle hitch, as well as conducting a pre-trip walk around inspection before you hit the road.
/ Move It / Tow Behind / Before You Tow: Trailer Hookup and PreTrip Inspection Toolbox Talks: Giving a Toolbox Talk
Kevin Labas from The Safety Collective provides some effective tips that can help leaders keep recurring safety meetings both engaging and relevant to your crew.
/ Site Leader / Toolbox Talks / Toolbox Talks: Giving a Toolbox Talk Toolbox Talks: Managing Stress & Fatigue
Every construction worker will experience stress and fatigue. In this Toolbox Talk, Safety expert Kevin Labas provides pro tips to help workers manage stress in a healthy way.
/ Site Leader / Toolbox Talks / Toolbox Talks: Managing Stress & Fatigue Hazard Control Measures
It is the responsibility of every supervisor and worker on a construction site to establish control measures and adhere to them. In this final OSHA10 training module, learn to implement the four levels of hazard control for an overall culture of safety.
/ Hazard Control Measures / Hazard Control Measures Toolbox Talks: Safety Data Sheets
Learn what a Safety Data Sheet (SDS) is and why every employee who works around chemical products should familiarize themselves with them.
/ Site Leader / Toolbox Talks / Toolbox Talks: Safety Data Sheets Outdoor Housekeeping
Best practices for good outdoor housekeeping for any work zone or job site.
/ Jobsite Hazards / Environmental / Outdoor Housekeeping Site Manager Responsibility
Discover everything a road construction Site Leader (Supervisor, Project Manager) is responsible for throughout the course of a typical day, as well as the contingencies when unexpected challenges happen.
/ Plan It / Project Management / Site Manager Responsibility Toolbox Talks: Lone Worker
Being a lone worker on a job site should be avoided, but can't always be. This Toolbox Talk will outline proper precautions to take while working as a lone worker and what to do if an incident arises.
/ Site Leader / Toolbox Talks / Toolbox Talks: Lone Worker Toolbox Talks: Stop Work Authority
Stop Work Authority can be an instrumental part of any safety program to reduce workplace incidents. This toolbox talk explains what it is and how employees can use it responsibly.
/ Site Leader / Toolbox Talks / Toolbox Talks: Stop Work Authority Toolbox Talks: Working with Inspectors
Site inspectors are a normal part of the job, and you will undoubtedly have to deal with them at one point or another. Learn how you should work with them and make the best out of their visits.
/ Site Leader / Toolbox Talks / Toolbox Talks: Working with Inspectors Career Empowerment: Adaptability
A critical component to every construction job is its workforce's adaptability. Learning how to be adaptable to weather, diversity, schedules, and other variables makes teams even stronger.
/ Career Empowerment / Career Empowerment: Adaptability The Paver: Job Demonstration
Take a trip to an actual highway job to review the basic operation of an asphalt paver.
/ Build It / The Road / The Paver: Job Demonstration Traffic Control Devices
An overview of common traffic control devices such as channelizing markers, barricades, signs, and signals. Learn the proper use of each device, visibility considerations, and why national standards must be observed.
/ Control It / WZTC / Traffic Control Devices Portable Ladder Safety
Best safety practices for setting up and using portable extension and folding step ladders.
/ Jobsite Hazards / Above & Below / Portable Ladder Safety Scaffold Installation and Safety
Learn how to conduct simple scaffolding for above-ground work and what safety precautions should be implemented.
/ Lifts / Platform Lifts / Scaffold Installation and Safety Career Empowerment: Dependability
Dependability on construction sites is imperative to getting the job done successfully and safely.
/ Career Empowerment / Career Empowerment: Dependability Career Empowerment: Positive Attitude
Having a positive attitude is a great way to be a team player. It's not always easy, but John gives tips on learning how to cope and control yourself around negativity.
/ Career Empowerment / Career Empowerment: Positive Attitude Career Empowerment: Professionalism
Professionalism on construction sites is reflected in the work you do, how you communicate, how you dress, and that of the company for which you work.
/ Career Empowerment / Career Empowerment: Professionalism Career Empowerment: Self-Motivation
What motivates you? If you can answer that question, you are a self-motivator -- and that means great potential in the construction industry!
/ Career Empowerment / Career Empowerment: Self-Motivation Career Empowerment: Teachability
There's a lot to learn when starting a new job! Make sure you're open-minded and positive, and you'll have the perfect attitude to be willing to learn from those around you.
/ Career Empowerment / Career Empowerment: Teachability Demolition
/ Clear It / Demolition Material Hauling
/ Move It / Material Hauling Body
/ Personal Safety / Body Emergency Response
/ Personal Safety / Emergency Response Licensing
/ Compliance / Licensing GPS
/ Plan It / GPS Clean Up
/ Clear It / Clean Up Earthworks
/ Clear It / Earthworks Drainage Structures
/ Clear It / Drainage Structures The Bridge
/ Build It / The Bridge The Road
/ Build It / The Road Tow Behind
/ Move It / Tow Behind Crane
/ Crane WZTC
/ Control It / WZTC Daily Walk-Around
/ Operator Inspection / Daily Walk-Around Fluids
/ System Check / Fluids Air and Cooling
/ System Check / Air and Cooling Components
/ System Check / Components Attachments
/ Tools / Attachments Tool Maintenance
/ Tools / Tool Maintenance PPE
/ Personal Safety / PPE Environmental
/ Jobsite Hazards / Environmental Focus Four
/ Jobsite Hazards / Focus Four Above & Below
/ Jobsite Hazards / Above & Below Sexual Harassment
/ Compliance / Sexual Harassment Boundaries
/ Plan It / Boundaries Tied Down
/ Move It / Tied Down Health
/ Compliance / Health Daily Assessment
/ Site Leader / Daily Assessment Mental Wellness and Suicide Awareness Course
/ IBEAM / Mental Wellness and Suicide Awareness Course WZTC
/ Control It / WZTC Toolbox Talks
/ Site Leader / Toolbox Talks Project Management
/ Plan It / Project Management Vac Truck
/ System Check / Vac Truck Track Machines
/ System Check / Track Machines Motor Grader
/ System Check / Motor Grader Paver
/ System Check / Paver Crane
/ System Check / Crane Tri-axle Dump
/ System Check / Tri-axle Dump Platform Lifts
/ Lifts / Platform Lifts Forklift Training
/ Lifts / Forklift Training Flagger Training
/ Control It / Flagger Training Signaling
/ Control It / Signaling Plan It
This category shows the proper planning of a project through GPS and setting the proper boundaries.
Site Ops / Plan It Build It
This category will teach how to build a bridge and road.
Site Ops / Build It Operator Inspection
This category will show the proper way to inspect multiple vehicles and equipment in order to keep them safe
Iron / Operator Inspection Tools
This category teaches about tool maintenance and machine attachments.
Iron / Tools Clear It
This category shows how to clear out a potential job site through removal of objects in the way.
Site Ops / Clear It Control It
This category teaches the proper way to control work zone traffic.
Site Ops / Control It System Check
This category will teach you about components for different vehicles, cooling systems, and fluids for your vehicle.
Iron / System Check Personal Safety
This category will teach you the proper set up and use of personal safety gear.
Safety / Personal Safety Jobsite Hazards
This category will show how to safely navigate different types of hazards such as environmental, above and below, and focus four.
Safety / Jobsite Hazards Compliance
This category guides you though different regulatory guidelines such as sexual harassment, COVID-19, and licensing.
Safety / Compliance Excavation and Trenching Safety
This category shows the OSHA 10 regulations regarding excavation and trenching training.
OSHA / Excavation and Trenching Safety Off The Ground
This category shows the OSHA 10 regulations regarding off the ground training.
OSHA / Off The Ground Introduction to OSHA
This category is an introduction to OSHA 10 regulations and standards.
OSHA / Introduction to OSHA Focus Four Hazards
This category shows the OSHA 10 regulations regarding focus four hazards training.
OSHA / Focus Four Hazards Tools: Hand and Power
This category shows the OSHA 10 regulations regarding hand and power tools training.
OSHA / Tools: Hand and Power PPE and Lifesaving Equipment
This category shows the OSHA 10 regulations regarding PPE and lifesaving equipment training.
OSHA / PPE and Lifesaving Equipment Health Hazards in Construction
This category shows the OSHA 10 regulations regarding health hazards in construction.
OSHA / Health Hazards in Construction Fire Protection
This category shows the OSHA 10 regulations regarding fire protection training.
OSHA / Fire Protection Materials Handling
This category shows the OSHA 10 regulations regarding materials handling training.
OSHA / Materials Handling Next Gen HEX Mini
This category shows how to safely operate, maintain, and inspect the Next Gen Hex Mini.
MiltonCAT / Next Gen HEX Mini D6XE
This category shows how to safely operate, maintain, and inspect the D6XE.
MiltonCAT / D6XE Wheel Loader Medium
This category shows how to safely operate, maintain, and inspect the Medium Wheel Loader.
MiltonCAT / Wheel Loader Medium Articulating Dump Trucks
This category shows how to safely operate, maintain, and inspect the Articulating Dump Trucks.
MiltonCAT / Articulating Dump Trucks Tier 4 Final
This Category shows what Tier 4 final is and how to properly maintain a machine with DEF.
MiltonCAT / Tier 4 Final Landfill Compactor
This category shows how to safely operate, maintain, and inspect the Landfill Compactor.
MiltonCAT / Landfill Compactor 972M XE
This category shows how to safely operate, maintain, and inspect the 972M XE.
MiltonCAT / 972M XE Next Gen HEX Medium
This category shows how to safely operate, maintain, and inspect the Next Gen HEX Medium.
MiltonCAT / Next Gen HEX Medium 906-908M
This category shows how to safely operate, maintain, and inspect the 906-908M.
MiltonCAT / 906-908M Next Gen HEX Large
This category shows how to safely operate, maintain, and inspect the Next Gen HEX Large.
MiltonCAT / Next Gen HEX Large 299D3 CTL
This category shows how to safely operate, maintain, and inspect the 299D3 CTL.
MiltonCAT / 299D3 CTL Wheel Loader Small
This category shows how to safely operate, maintain, and inspect the Small Wheel Loader.
MiltonCAT / Wheel Loader Small Off-Highway Truck
This category shows how to safely operate, maintain, and inspect the Off-Highway Truck.
MiltonCAT / Off-Highway Truck Wheel Loader Large
This category shows how to safely operate, maintain, and inspect the Large Wheel Loader.
MiltonCAT / Wheel Loader Large Site Leader
This category teaches site leaders and foreman about hazards and regulations on a job site.
Safety / Site Leader IBEAM
This category provides fundamental awareness and information on mental health challenges and suicide issues.
Safety / IBEAM Hazard Control Measures
This category shows the OSHA 10 regulations regarding hazard control measures training.
OSHA / Hazard Control Measures Move It
This category shows the proper way to haul material, tie down objects and machines, and tow trailers and machines.
Site Ops / Move It Lifts
This category teaches how to safely operate forklifts and platform aerial lifts..
Iron / Lifts Like A Pro
This category teaches the basics of the most common hand tools.
Job Ready / Like A Pro Career Empowerment
This category teaches the importance of on-the-job soft skills.
Job Ready / Career Empowerment Job Ready
Job Ready Available in modules Site Ops
Site Ops Available in modules Safety
Safety Available in modules OSHA
OSHA Available in modules MiltonCAT
MiltonCAT Available in modules Iron
Iron Available in modules