<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1073028186981917&amp;ev=PageView&amp;noscript=1">

Training Modules Library

The aQuiRe training modules library comes with over 300 accredited courses, crafted by construction and safety experts. It includes interactive modules, quizzes, and presentations, covering a variety of topics related to construction work and site safety.

Close

Looking for something?

Type a keyword and we’ll search through categories, subcategories, modules and descriptions.

GPS Rover: Basic Setup Part 1
Understanding the setup and assembly of a TSC-3
/ Plan It / GPS / GPS Rover: Basic Setup Part 1
GPS Rover: Basic Setup Part 2
Connecting a TSC-3 and TSC-7 controller and understanding device operation
/ Plan It / GPS / GPS Rover: Basic Setup Part 2
Sweep It: Operate
Proper methods for confirming broom attachment is connected and functioning properly; basic maneuvers for efficiently sweeping material.
/ Clear It / Clearing / Sweep It: Operate
Silt Fence
Proper installation of silt fence, focusing on site terrain and slope, water flow and projected soil disturbance during construction.
/ Clear It / Earthworks / Silt Fence
Bulldozer: Rough Time
Using a bulldozer to perform basic rough grading work, preparing a site for fine grading and restoration.
/ Clear It / Earthworks / Bulldozer: Rough Time
Excavator: Can You Dig It?
Basic operation for digging round and flat bottom trenches. Covers establishing proper pitch and grade, as well as safety fundamentals.
/ Clear It / Earthworks / Excavator: Can You Dig It?
Excavator: Trench It
Best-Practices when digging a trench, requirements for installing trench shields, understanding the importance of soil conditions.
/ Clear It / Earthworks / Excavator: Trench It
Tamper: Plate Compactor
This module discusses the proper system check that a mechanic must perform to ensure that the attachment is functioning properly before sending it out for use in the field.
/ Attachments / Excavator-at / Tamper: Plate Compactor
Culvert Part 1: Excavate
Expert approach for replacing a partially collapsed culvert. Outlines benching requirements, dewatering and basic methods to address scour.
/ Clear It / Drainage Structures / Culvert Part 1: Excavate
GPS: Trimble Siteworks Tutorial Part 1
GPS Software. Foundational overview of layout, stakeout and field measuring a project.
/ Plan It / GPS / GPS: Trimble Siteworks Tutorial Part 1
GPS: Trimble Siteworks Tutorial Part 2
GPS Software. Foundational overview of layout, stakeout and field measuring a project.
/ Plan It / GPS / GPS: Trimble Siteworks Tutorial Part 2
Working Around the Railroad: Right of Way
It's critical for contracted construction crews to understand the job and safety requirements when doing work around an active railroad right of way.
/ Plan It / Site Knowledge / Working Around the Railroad: Right of Way
Water is Solid: Hydrodemolition
Demonstration on demolition using high pressure water, identification of key operating elements of the mechanical set up.
/ Clear It / Demolition / Water is Solid: Hydrodemolition
Crush It: Asphalt Crushing
This module covers the best practices for crusher maintenance, safety protocols, LOTO and basic operations.
/ Clear It / Demolition / Crush It: Asphalt Crushing
Hammer Time: System Check
This module details the correct method for performing a system check of a hammer attachment prior to field use.r
/ Equipment / Excavator-eq / Hammer Time: System Check
Chainsaw: Downed Wood Clearing
Overview on proper and safe techniques for using a chainsaw. This modules covers various cutting techniques such as limbing and bucking, as well as various tools and accessories.
/ Clear It / Clearing / Chainsaw: Downed Wood Clearing
Snow Blower: Operate
Covers the basic operations and efficient control of the snowblower attachment.
/ Clear It / Clearing / Snow Blower: Operate
Pitch Perfect: Setting the Grade
Covering the basics on setting pitch and grade when operating a motor grader.
/ Build It / The Road / Pitch Perfect: Setting the Grade
The Slope: Squeeze It
This earthworks module covers basic berm construction, working with highly saturated materials and stabilizing a slope.
/ Clear It / Earthworks / The Slope: Squeeze It
The Slope: Aerate It
Techniques for safely and efficiently managing moisture rich material from dredging activities.
/ Clear It / Earthworks / The Slope: Aerate It
The Slope: Grade It
Covers safe dozer operations on a slope and tactics when working with wet material.
/ Clear It / Earthworks / The Slope: Grade It
Culvert Part 2: Place & Cover
Expert approach for replacing a partially collapsed culvert. Outlines how to properly backfill and compact the ground to prevent settling problems with the road.
/ Clear It / Drainage Structures / Culvert Part 2: Place & Cover
Drain It: Underground Detention System
Practical application of placing an underground detention system for drainage control. Covers basic surveying, installation approach and backfilling.
/ Clear It / Drainage Structures / Drain It: Underground Detention System
Drain It: Lay it Under
This module covers trenching practices and placing underground drainage. Demonstration of the proper use of filter fabric, installing connectors and backfilling.
/ Clear It / Drainage Structures / Drain It: Lay it Under
Get Over It: Temporary Stream Crossing
This dynamic module covers the foundational design for a temporary stream crossing, various uses of material and proper maintenance of the crossing.
/ Clear It / Earthworks / Get Over It: Temporary Stream Crossing
Dredge It: Stream & Lake
Dredging is the process of excavating and removing moisture-rich material from an environment. This module covers key methods for actively managing materials.
/ Clear It / Earthworks / Dredge It: Stream & Lake
Dredge It: Bank Grading
This module will show you how to successfully grade the slope to reduce erosion and keep material from filling the channel.
/ Clear It / Earthworks / Dredge It: Bank Grading
The Abutment: Form It
Master overview of installing forms building an abutment wall on a bridge. Focuses on rebar elements; the use of spacers and wall ties; installing form walls and waterstops.
/ Build It / The Bridge / The Abutment: Form It
True or False: Falsework
Our master carpenter outlines the process of forming a bridge deck and demonstrates how to safely install falsework.
/ Build It / The Bridge / True or False: Falsework
Deck Pans Part 3: Last SIP
Part 3, the final steps to installing the deck pans on a bridge, covers how to cut and place pans on an angle.au
/ Build It / The Bridge / Deck Pans Part 3: Last SIP
Lowboy: Disconnect
Expert lowboy driver explains the basics of a walk around inspection for a tractor trailer and key observations for pre-trip safety. Identification of components of the tractor.
/ Move It / Tow Behind / Lowboy: Disconnect
LeeBoy Tack Distributor Part 2: Loading & Heating
Loading and heating of the machine before operation
/ Equipment / Paving / LeeBoy Tack Distributor Part 2: Loading & Heating
WZTC Part 1: WTH is WZTC?
Definition of the basics for Work Zone Traffic Control as well as the responsibilities and methods used to communicate with the traveling public.
/ Control It / WZTC / WZTC Part 1: WTH is WZTC?
Motor Grader: Inspect
Complete walk-around and basic inspection procedure for the machine.
/ Operator Inspection / Daily Walkaround / Motor Grader: Inspect
Rigging: Hardware Inspection
Comprehensive overview of the different styles of rigging hardware and their uses.
/ Operator Inspection / Daily Walkaround / Rigging: Hardware Inspection
Tri-Axle Dump Truck: Components
An examination of the working components of a triaxle dump truck. Such as the differentials, traction control and PTO.
/ Equipment / Tri-Axle Dump / Tri-Axle Dump Truck: Components
Sweep It: Attach
Identification of the working components of the attachment, the importance of proper hydraulic pressure and how to position the machine to properly hook up the broom.
/ Attachments / CTL and Loader / Sweep It: Attach
Tamper: Attach
Details the tamper attachment and the proper procedure for connecting it to a machine. Covers basic preventative maintenance.
/ Attachments / Excavator-at / Tamper: Attach
CAT Skid Steer: Attachments (PDF)
Operation Guide showing button controls for: cold planer, mulcher, wheel saw. [Resource only. No video.]
/ Attachments / CTL and Loader / CAT Skid Steer: Attachments (PDF)
Mini Mill: Skid Steer Planer Maintenance
Functional check of the attachments operational system to ensure proper functioning. Content covers different cutting bits, grease points, controls for angling and rate of rotation.
/ Attachments / CTL and Loader / Mini Mill: Skid Steer Planer Maintenance
It's Pouring: Finishing it Out
Overview of techniques and best practices for performing finishing work on a bridge deck pour.
/ Build It / The Bridge / It's Pouring: Finishing it Out
The Deck: Dry Run & Layout
This module provides pro-tips on measuring for haunch depth during a dry run to ensure proper deck thickness.
/ Build It / The Bridge / The Deck: Dry Run & Layout
The Abutment: Get Your Footing
This module covers the principles behind pile driving and how it reinforces the earth for building the abutment walls of the bridge.
/ Build It / The Bridge / The Abutment: Get Your Footing
Rebar
Overview on the basics in design, function and installation of rebar for tensile strength in a bridge deck.
/ Build It / The Bridge / Rebar
Swinging Steel
Setting the steel girders for a temporary bridge. Demonstration of various rigging techniques.
/ Build It / The Bridge / Swinging Steel
Little Pour
Outline of the process for a small-scale deck pour. Step-by-step demonstration of individual responsibilities and utilization of tools and equipment.
/ Build It / The Bridge / Little Pour
Deck Pans Part 1: Take a SIP
Part 1 of correct deck pan installation. Detailed approach for proper measurements and weld placement, as well as pro-tips for installing angles.
/ Build It / The Bridge / Deck Pans Part 1: Take a SIP
Deck Pans Part 2: SIP Carefully
Part 2, this covers all basic safety measures when cutting, welding and setting up to install Stay In Place forms for a bridge deck.
/ Build It / The Bridge / Deck Pans Part 2: SIP Carefully
It's Pouring: Putting it in Place
Introduction to the process of pouring concrete for bridge deck construction.
/ Build It / The Bridge / It's Pouring: Putting it in Place
Principles of Paving Part 1
Laying a smooth asphalt mat requires consistency in paving speed, material flow, and temperature. This introduction to paving module provides a helpful primer for new road construction laborers and operators.
/ Build It / The Road / Principles of Paving Part 1
The Widener: Operate
Explores the fundamentals for using a widener for road and shoulder work.
/ Build It / The Road / The Widener: Operate
Curb It!
Setting granite curb in an urban setting, basic methods for establishing alignment and maintaining stabilization.
/ Build It / The Road / Curb It!
Lowboy: Chain it Down
How to load and chain down a large, rubber tired machine. Includes rate charts, working load limits, demonstration of best practices, identification of tie-down points and risk reduction.
/ Move It / Tied Down / Lowboy: Chain it Down
Haul It: Tie It Down
Demonstration of how to use ratchet straps to secure a mixed load on flatbed trailer. Identification of proper tension and application for multiple straps.
/ Move It / Tied Down / Haul It: Tie It Down
Haul It: Pre-Cast
Best practices when loading and securing precast concrete forms. Covers basic rigging methods for lifting multiple types of precast materials.
/ Move It / Tied Down / Haul It: Pre-Cast
Tri-Axle Dump Truck: Operate
This module is about basic material loading and hauling operations; discussion of gear shifting, dump controls and preventative maintenance routines.
/ Equipment / Tri-Axle Dump / Tri-Axle Dump Truck: Operate
Articulating Dump Truck
Inside and outside, a thorough review of the major working parts and components of the off-road haul truck. Proper operation and basic applications are covered.
/ Move It / Material Hauling / Articulating Dump Truck
Fuel Truck
Outline of the requirements for HAZMAT licensing in NYS and best practices for fueling equipment in the field. Focusing on safety and efficiency in the field.
/ Move It / Material Hauling / Fuel Truck
Haul Roads
The basics of why, how and where a haul road is used in an excavation project. Covers tips for maintaining a haul road and how to minimize disruption.
/ Move It / Material Hauling / Haul Roads
Crafco Trailer
How to safely load and operate a Crafco trailer mounted melter for laying down crack sealant.
/ Move It / Tow Behind / Crafco Trailer
LeeBoy Tack Distributor Part 1: Safety & Inspection
Safety and inspection of the machine
/ Equipment / Paving / LeeBoy Tack Distributor Part 1: Safety & Inspection
LeeBoy Tack Distributor Part 3: Basic Operation
Basic operations of the LeeBoy
/ Equipment / Paving / LeeBoy Tack Distributor Part 3: Basic Operation
LeeBoy Tack Distributor Part 4: Cleaning & Storage
Cleaning the machine and safely storing it
/ Equipment / Paving / LeeBoy Tack Distributor Part 4: Cleaning & Storage
Crane: License
The requirements and basics for how to obtain and maintain a crane license in NYS. Outlines testing fundamentals.
/ Compliance / Licensing / Crane: License
Crane Hand Signals
Covers the importance of communication between an operator and a ground person directing machine movements. Resource charts and live demonstration of hand signals for safe job site communication.
/ Control It / Signaling / Crane Hand Signals
Forklift Training Part 1: Inspect
This module will walk you through how to Inspect a forklift before operation.
/ Lifts / Forklift Training / Forklift Training Part 1: Inspect
Forklift Training Part 2: Basic Functions
This modules will show you all of the Basic Functions of a forklift.
/ Lifts / Forklift Training / Forklift Training Part 2: Basic Functions
Forklift Training Part 3: Operate
This module will take you through all the Operation safety you need to know while using a forklift.
/ Lifts / Forklift Training / Forklift Training Part 3: Operate
Forklift Training Part 4: Safety
This video will go over the best safety practices when operating a forklift.
/ Lifts / Forklift Training / Forklift Training Part 4: Safety
Aerial Work Platform Part 2: Operate
In this module, master trainer Jim Jones demonstrates how to conduct a function test, understand the basic controls, and safely operate an aerial work platform (AWP) in the field.
/ Lifts / Platform Lifts / Aerial Work Platform Part 2: Operate
WZTC Part 2: Watch Out! Work Zones
Highlighting the various hazards and dangers in a work zone for a worker and how to minimize personal risk.
/ Control It / WZTC / WZTC Part 2: Watch Out! Work Zones
WZTC Part 4: Hold It Down
A work zone traffic control module that focuses on the importance of properly weighting traffic control devices to prevent disruption from weather events.
/ Control It / WZTC / WZTC Part 4: Hold It Down
WZTC Part 6: Highway Taper
The purpose of work zone traffic control is to provide a safe work area for workers within the roadway, while facilitating the safe and orderly flow of all road users (motorists, bicyclists and pedestrians) through the work zone.
/ Control It / WZTC / WZTC Part 6: Highway Taper
Portable Traffic Lights
Portable Traffic Lights are an ideal way to control traffic when a flag person is not available. In this module we will look at inspecting and setting up a portable traffic device on a temporary roadside work area.
/ Control It / Signaling / Portable Traffic Lights
Flag It!
Expert traffic control technician Jim Jones explains basic flagging procedures for work zone traffic control situations in rural and urban settings.
/ Control It / Signaling / Flag It!
Flagger Training Part 1: Intro to Traffic Control
In this first training module, certified trainer James Jones explains the qualifications and basic functions of traffic control flagger, as well as a review of the equipment and apparel needed to perform your duty.
/ Control It / Flagger Training / Flagger Training Part 1: Intro to Traffic Control
Flagger Training Part 2: Taking Charge
When directing traffic, you're the boss. This module describes how a flagger properly handles critical interactions with drivers and pedestrians, including emergency situations on a construction site.
/ Control It / Flagger Training / Flagger Training Part 2: Taking Charge
Flagger Training Part 3: Get Ready
This module covers three important components that need to be in place prior to traffic control: Personal Protection Equipment (PPE), Advanced Warning Signs, and an understanding of a flagger's station.
/ Control It / Flagger Training / Flagger Training Part 3: Get Ready
Flagger Training Part 4: Directing Traffic
A flagger's primary job is to direct traffic safely through a construction site. This module provides instruction on the proper use of the Stop/Slow Paddle, red flags, hand signals, and two-way radios.
/ Control It / Flagger Training / Flagger Training Part 4: Directing Traffic
Chainsaw: Inspect
This module teaches a healthy respect for and knowledge of the chainsaw's limits and proper maintenance. It will help the user effectively mitigate risks and stay safe.
/ Clear It / Clearing / Chainsaw: Inspect
Excavator: Inspect
This module demonstrates the correct inspection of the excavator. Each element is identified with a full review of proper procedures.
/ Operator Inspection / Daily Walkaround / Excavator: Inspect
Lowboy Truck and Trailer: Inspect
Expert lowboy driver explains the basics of a walk around inspection for a tractor trailer and key observations for pre-trip safety. Identification of components of the tractor.
/ Operator Inspection / Daily Walkaround / Lowboy Truck and Trailer: Inspect
Tri-Axle Dump Truck: Inspect
Topics covered in this safety module include the correct procedure for a walk-around, daily inspection and proper procedures for WZTC if the truck breaks down.
/ Operator Inspection / Daily Walkaround / Tri-Axle Dump Truck: Inspect
Snow Blower: Inspect
The pre-operation protocol that must be followed before operating the snow blower attachment. Also covers basic trouble shooting.
/ Operator Inspection / Daily Walkaround / Snow Blower: Inspect
The Crane: Inspect
This module demonstrates the correct inspection of the crane. Each element is identified with a full review of proper procedures.
/ Operator Inspection / Daily Walkaround / The Crane: Inspect
Rigging: Sling Safety Inspection
Overview of the different types of slings and how to stay safe while using each type.
/ Operator Inspection / Daily Walkaround / Rigging: Sling Safety Inspection
Aerial Work Platform Part 1: Inspect
This module demonstrates how to conduct a thorough daily inspection of an aerial work platform.
/ Lifts / Platform Lifts / Aerial Work Platform Part 1: Inspect
DEF / Tier 4 Final
The practical application and safety requirements for using Diesel Exhaust Fluid. Overview on how to keep contaminants from entering the fuel system.
/ System Check / Fluids / DEF / Tier 4 Final
Hydraulics 101
Expert overview on the function of hydraulic systems and proper maintenance practices. Focus: EXCAVATOR
/ System Check / Fluids / Hydraulics 101
Grease Points & Lubrication
Expert overview on the importance of applying grease to a machine. Definition of high-use components, key grease points and best practices.av
/ System Check / Fluids / Grease Points & Lubrication
Cool It Down
Expert overview on the function of radiator systems. Details on proper maintenance and cleaning practices.o
/ System Check / Maintenance / Cool It Down
Motor Grader: Components
Step by step overview of the major elements of the machine, the function and basic operating guidelines.
/ Equipment / Motor Grader / Motor Grader: Components
Crane: Conventional
Discusses the key differences between varies types of cranes and gives a basic overview of a conventional friction crane.r
/ Equipment / Crane / Crane: Conventional
Crane: Hydraulic
Demonstration of the interior controls and industry best practices when operating a hydraulic crane.
/ Equipment / Crane / Crane: Hydraulic
Paver: Components
The components of the paver, basic function of key elements and basic maintenance procedures.
/ Equipment / Paving / Paver: Components
Motor Grader: Systems
This module goes over the key functioning elements of the motor grader. It covers the important mechanical systems that need to be fired up prior to operation.
/ Equipment / Motor Grader / Motor Grader: Systems
Track Time: Maintenance
Identification of the key components of a track machine and preventative maintenance procedures.
/ System Check / Maintenance / Track Time: Maintenance
Hammer Time: Attach
Outlines the correct method to hook up the attachment and covers basic preventative maintenance.
/ Attachments / Excavator-at / Hammer Time: Attach
Mini Mill: Skid Steer Planer Attach
Attaching a mini mill head with Steve.
/ Attachments / CTL and Loader / Mini Mill: Skid Steer Planer Attach
Wrist-O-Twist: Bucket Attach
Steve explains how to attach a twist-a-wrist.
/ Attachments / Excavator-at / Wrist-O-Twist: Bucket Attach
Snow Blower: Attach
How to engage the fusion coupler and connect the hydraulic and electric systems between a snow blower attachment and a CAT 938M.
/ Attachments / CTL and Loader / Snow Blower: Attach
Snow Blower: Disconnect
How to disengage the fusion coupler and disconnect hydraulic and electric systems between a snow blower attachment and a CAT 938M.
/ Attachments / CTL and Loader / Snow Blower: Disconnect
LOTO (Lockout Tagout)
Demonstration of the situations when Lock Out Tag Out must be used. Best practices for engaging Lock Out Tag Out and preventative measures.
/ System Check / Maintenance / LOTO (Lockout Tagout)
Wrist-O-Twist: System Check
Best practices when operating a machine with a twist-a-wrist  attachment.
/ Attachments / Excavator-at / Wrist-O-Twist: System Check
Hammer Like a Pro
Workers have been using hammers for the past 30,000 years. Are you swinging like a caveman or hammering like a pro? In this tip-filled module, master carpenter Rick Klug reviews how to select the right hammer for the job while using it safely and effectively on a construction site. Along the way he shares numerous time-saving tricks and insights that he’s picked up over 45 years in the trade.
/ Like A Pro / Hammer Like a Pro
Ergonomics and Back Injury Prevention
Back injuries are the leading cause of disability cases in the construction industry. In this module, CAHill's Carley Hill and safety expert James Jones, explore the benefits of workplace ergonomics and share helpful pro tips on how to keep your back working optimally for years to come.
/ Personal Safety / Body / Ergonomics and Back Injury Prevention
Heat Stress
How to identify the signs of heat stress on the human body, and what to do if you see these signs.
/ Personal Safety / Body / Heat Stress
Cold Stress
Best practices when working in near or below freezing conditions.
/ Personal Safety / Body / Cold Stress
PPE Overview
This module identifies the value and importance of using the correct personal protection equipment.
/ Personal Safety / PPE / PPE Overview
Pathogen Prevention: In the Field
Pathogens, viruses and sickness can be prevented with best practices. This module covers methods in the field for protecting yourself, coworkers, and those at home.
/ Jobsite Hazards / Environmental / Pathogen Prevention: In the Field
Pathogen Prevention: Indoor
Due to the increased risk of sickness from COVID-19, this module provides training on higher levels of vigilance when maintaining and cleaning public buildings.
/ Jobsite Hazards / Environmental / Pathogen Prevention: Indoor
Bloodborne Pathogens
This module will bring awareness to the potential dangers of bloodborne pathogens and the steps you can take to protect yourself from exposure.
/ Jobsite Hazards / Environmental / Bloodborne Pathogens
Slips, Trips and Falls
Raise your awareness to recognize & remove fall hazards. This training defines the hazards so you understand how to reduce exposure to preventable falls.
/ Jobsite Hazards / Focus Four / Slips, Trips and Falls
Caught Between
Maintaining safe practices on the job site to prevent caught between incidents or accidents is critical.
/ Jobsite Hazards / Focus Four / Caught Between
Sexual Harassment Part 2
This module details several case studies considered unacceptable under the law, as well as examples of acceptable behavior in the workplace.
/ Compliance / Harassment / Sexual Harassment Part 2
Don't Zone Out
This module covers the risks of drowsy driving, environmental exposures and the importance of staying alert and aware of surroundings.
/ Personal Safety / Body / Don't Zone Out
Respiratory Protection
Staying safe on the job with the correct respiratory PPE.
/ Personal Safety / PPE / Respiratory Protection
Hearing Conservation
Protecting yourself from job hazards that can cause hearing loss
/ Personal Safety / PPE / Hearing Conservation
Fire Protection & Extinguisher Use
Understanding how to use an extinguisher and how to protect ourselves from fire hazards
/ Personal Safety / Emergency Response / Fire Protection & Extinguisher Use
Chemical Hazards
A construction site is filled with visible and invisible chemicals that can be harmful to workers. This module explores the most common types of dangerous chemical agents on a jobsite and how workers can protect themselves from exposure.
/ Jobsite Hazards / Environmental / Chemical Hazards
Asbestos Awareness
Understanding how asbestos affects the body and how to protect ourselves.
/ Jobsite Hazards / Environmental / Asbestos Awareness
Silica
The dangers of silica and how to prevent exposure
/ Jobsite Hazards / Environmental / Silica
Housekeeping: Indoor
This module provides an overview on internal housekeeping. It focuses on keeping the shop(s) and municipal buildings clean, and free of anything that can cause injury.
/ Jobsite Hazards / Environmental / Housekeeping: Indoor
Lead Safety
Understanding the dangers of being exposed to lead.
/ Jobsite Hazards / Environmental / Lead Safety
Struck By
This module increases awareness of the risks associated with incidents involving job site equipment and workers. The focus is on how to prevent accidents by maintaining safe positioning and distances.
/ Jobsite Hazards / Focus Four / Struck By
Confined Space
The Confined Space Safety module covers risks associated with entering and working in closed environments, as well as basic rescue procedures.
/ Jobsite Hazards / Focus Four / Confined Space
Aerial Work Platform Part 3: Safety
An aerial work platform must never be operated without a proper understanding of safety. This module explains how to correctly put on a safety harness, and outlines the required safety guidelines when operating an AWP.
/ Lifts / Platform Lifts / Aerial Work Platform Part 3: Safety
Excavator Dig Safely Part 1: One Call Procedure
This module discusses the proper procedures for One Call when doing excavation work. Covers pre-demolition meetings, advance notifications and submitting a ticket.
/ Jobsite Hazards / Dig Safely Course / Excavator Dig Safely Part 1: One Call Procedure
Excavator Dig Safely Part 2: Make Your Mark
Review of tolerance zones, test hole depths and methods as well as removal depths to properly expose utilities.
/ Jobsite Hazards / Dig Safely Course / Excavator Dig Safely Part 2: Make Your Mark
Excavator Dig Safely Part 3: Know Your Location
Know your location: Finding the tolerance zone, understanding the requirements prior to excavation.
/ Jobsite Hazards / Dig Safely Course / Excavator Dig Safely Part 3: Know Your Location
Excavator Dig Safely Part 4: Look Before You Leap
Know your location
/ Jobsite Hazards / Dig Safely Course / Excavator Dig Safely Part 4: Look Before You Leap
Excavator Dig Safely Part 5: How to be a Boss
Backfill
/ Jobsite Hazards / Dig Safely Course / Excavator Dig Safely Part 5: How to be a Boss
What is a Hazard?
This module overviews the safety precautions a person should take when dealing with hazards on the job.
/ Site Leader / Daily Assessment / What is a Hazard?
Sexual Harassment Part 1
This module covers the definition and terms identified as sexual harassment. Outlining the process for filing a complaint, as well as who is protected under the law.
/ Compliance / Harassment / Sexual Harassment Part 1
Keeping Your CDL
Overview of the basic requirements to keep your Commercial Drivers License (CDL).
/ Compliance / Licensing / Keeping Your CDL
WZTC Part 7: Overnight Highway Traffic Control
Night highway construction work brings a unique challenge for traffic control teams. This module follows an overnight traffic crew as they progressively bump out temporary channeling devices to block off three lanes of an expressway. Learn from an experienced supervisor on the proper use of a truck mounted attenuator, arrow board, portable light plant, and how a team works in sync to secure a new lane from high speed traffic under the work lights.
/ Control It / WZTC / WZTC Part 7: Overnight Highway Traffic Control
MINI HEX: Safety
Exploration of the safety components of the machine, including operator ergonomics and emergency features.
/ Next Gen HEX Mini / MINI HEX: Safety
MINI HEX: Inspect
A proper pre-shift walk around and machine inspection procedure of the Next Gen HEX Mini.
/ Next Gen HEX Mini / MINI HEX: Inspect
MINI HEX: Assist Fine Tune Calibration
This module goes over how to use the assist calibration in the Next Gen HEX Mini.
/ Next Gen HEX Mini / MINI HEX: Assist Fine Tune Calibration
MINI HEX: Operation Overview
A general overview of the Next Gen HEX Mini operations including cab controls, start up, basic movements and tool operations.
/ Next Gen HEX Mini / MINI HEX: Operation Overview
MINI HEX: Systems
The exploration of the major operating systems, safety considerations, and key areas of scheduled service for the Next Gen HEX Mini.
/ Next Gen HEX Mini / MINI HEX: Systems
MINI HEX FEATURE FOCUS: Monitor
This module highlights how to use the monitor component of the machine.
/ Next Gen HEX Mini / MINI HEX FEATURE FOCUS: Monitor
MINI HEX FEATURE FOCUS: Stick Steer
A demonstration of the unique Stick Steer feature on the Mini HEX and its application.
/ Next Gen HEX Mini / MINI HEX FEATURE FOCUS: Stick Steer
D6 XE DOZER: Systems
The overview of the fundamentals and service of the electric and hydraulic operating systems of the D6 XE.
/ D6 XE Dozer / D6 XE DOZER: Systems
D6 FEATURE FOCUS: Monitor
This module provides training on the unique features of the D6XE such as the operators monitor, seat controls and waster handler package (if applicable).
/ D6 XE Dozer / D6 FEATURE FOCUS: Monitor
D6 XE DOZER: Operation Overview
In this module we provide an overview of the operation of the machine.
/ D6 XE Dozer / D6 XE DOZER: Operation Overview
D6 XE DOZER: Safety
This video highlights the safety features of the D6XE.
/ D6 XE Dozer / D6 XE DOZER: Safety
D6 XE DOZER: Inspect
A proper walk around inspection of the machine prior to operation.
/ D6 XE Dozer / D6 XE DOZER: Inspect
MEDIUM WHEEL LOADER: Safety
A look at the safety tips and features found on the CAT Medium Wheel Loader family of machines.
/ Wheel Loader Medium / MEDIUM WHEEL LOADER: Safety
MEDIUM WHEEL LOADER: Operation Overview
Basic startup, operation and shutdown procedure for the CAT Medium Wheel Loader family (950-966).
/ Wheel Loader Medium / MEDIUM WHEEL LOADER: Operation Overview
MEDIUM WHEEL LOADER: Inspect
A proper pre-shift walk around and machine inspection procedure for the Medium Wheel Loader.
/ Wheel Loader Medium / MEDIUM WHEEL LOADER: Inspect
ARTICULATED DUMP TRUCK: Inspect
An overview of the daily walk around inspection for the Articulated Dump Truck (ADT).
/ Articulated Dump Trucks / ARTICULATED DUMP TRUCK: Inspect
ARTICULATED TRUCK FEATURE FOCUS: Automated Hoist
Understand the automated hoist function of the Articulating Dump Truck (ADT).
/ Articulated Dump Trucks / ARTICULATED TRUCK FEATURE FOCUS: Automated Hoist
ARTICULATED DUMP TRUCK: Safety & Systems
This video is an overview of how to stay safe on the Articulating Dump Truck (ADT), and how to maintain the machine through service maintenance.
/ Articulated Dump Trucks / ARTICULATED DUMP TRUCK: Safety & Systems
ARTICULATED DUMP TRUCK: Operation Overview
In this module gain knowledge of the operations of the Articulated Dump Truck (ADT).
/ Articulated Dump Trucks / ARTICULATED DUMP TRUCK: Operation Overview
DEF Testing and Quality Concerns
Testing the Diesel Exhaust Fluid and having the knowledge of what quality the fluid needs to be for optimal performance.
/ Tier 4 Final / DEF Testing and Quality Concerns
DEF Maintenance Shutdown Process
The proper procedure for shutting down Tier 4 Final machines.
/ Tier 4 Final / DEF Maintenance Shutdown Process
LANDFILL COMPACTOR: Equipment Safety
An overview of the Landfill Compactor safety features.
/ Landfill Compactor / LANDFILL COMPACTOR: Equipment Safety
LANDFILL COMPACTOR: Inspect
An overview of the walk around daily inspection of the Landfill Compactor.
/ Landfill Compactor / LANDFILL COMPACTOR: Inspect
LANDFILL COMPACTOR: Systems & Service
An overview of the service features of the Landfill Compactor.
/ Landfill Compactor / LANDFILL COMPACTOR: Systems & Service
LANDFILL COMPACTOR: Startup & Shutdown
This video walks you though how to start the Landfill Compactor for the workday and how to shut it down when the day is over.
/ Landfill Compactor / LANDFILL COMPACTOR: Startup & Shutdown
972M XE Wheel Loader: Inspect
A proper daily walk around inspection of the machine prior to operation.
/ Wheel Loader Large / 972M XE Wheel Loader: Inspect
972M XE Wheel Loader: Systems
The overview of the fundamentals and service of the electric and hydraulic operating systems of the D6 XE.
/ Wheel Loader Large / 972M XE Wheel Loader: Systems
972M XE Wheel Loader: Operation Overview
This operation overview module covers the foundational knowledge needed to operate the machine.
/ Wheel Loader Large / 972M XE Wheel Loader: Operation Overview
LARGE WHEEL LOADER: Payload Scale, Ride Control, Engine Idle Timer
The focus of this video demonstrates the unique features of the machine such as payload scale, ride control & engine idle timer.
/ Wheel Loader Large / LARGE WHEEL LOADER: Payload Scale, Ride Control, Engine Idle Timer
LARGE WHEEL LOADER: Payload Scale (Long Demo)
This module provides a complete demonstration on the function and operation of the payload scale feature.
/ Wheel Loader Large / LARGE WHEEL LOADER: Payload Scale (Long Demo)
MHEX FEATURE FOCUS: Lift Assist
Overview of the Next Gen Lift Assist feature for the CAT Hydraulic Excavator
/ Next Gen HEX Medium / MHEX FEATURE FOCUS: Lift Assist
MEDIUM HEX: Assist Fine Tune Calibration
A detailed step by step process of the Assist Fine Tune Calibration, which needs to be conducted for every new attachment added to the excavator.
/ Next Gen HEX Medium / MEDIUM HEX: Assist Fine Tune Calibration
MEDIUM HEX: Machine Display Settings
A look at changing machine settings and shortcuts in the Next Gen monitor.
/ Next Gen HEX Medium / MEDIUM HEX: Machine Display Settings
MEDIUM HEX: Bucket Measure Up
Learn how to conduct a Bucket Measure Up, which is needed to take advantage of all the technologies in the Next Gen excavator.
/ Next Gen HEX Medium / MEDIUM HEX: Bucket Measure Up
MEDIUM HEX: Monitor Setup
A basic layout and navigation of the Next Gen monitor panel, as well as inputting some of the most useful custom settings.
/ Next Gen HEX Medium / MEDIUM HEX: Monitor Setup
MEDIUM HEX: Systems Technology
An overview of the basic elements of the Next Gen E-fence system.
/ Next Gen HEX Medium / MEDIUM HEX: Systems Technology
MEDIUM HEX: Safety
Exploration of the safety components of the CAT medium hydraulic excavator (320-335), including operator ergonomics and emergency features.
/ Next Gen HEX Medium / MEDIUM HEX: Safety
MEDIUM HEX: Inspect
A proper daily walk around inspection of the medium hydraulic excavator (320-335) prior to operation.
/ Next Gen HEX Medium / MEDIUM HEX: Inspect
MEDIUM HEX: Payload Calibration
An in-depth demonstration and calibration of the Payload Assist feature for Next Gen Medium and Large excavators.
/ Next Gen HEX Medium / MEDIUM HEX: Payload Calibration
MHEX FEATURE FOCUS: Efficiency Features
How to set up and use Cat Swing Assist, Cat Bucket Assist, and Cat Boom Assist for greater work efficiency in the Next Gen Hydraulic Excavator.
/ Next Gen HEX Medium / MHEX FEATURE FOCUS: Efficiency Features
MEDIUM HEX: Operation Overview
This module provides an overview of the cab controls, startup, basic movements, tool operation and proper shutdown procedure of the CAT medium excavator (320-335).
/ Next Gen HEX Medium / MEDIUM HEX: Operation Overview
MHEX FEATURE FOCUS: E-fence Setup
In-depth demonstration to setup and operate the CAT E-Fence system for all Next Gen medium and large hydraulic excavators
/ Next Gen HEX Medium / MHEX FEATURE FOCUS: E-fence Setup
MHEX FEATURE FOCUS: Grade Assist
A detailed look at setup and operation of the Grade Assist feature for the Next Gen excavators.
/ Next Gen HEX Medium / MHEX FEATURE FOCUS: Grade Assist
906-908M FEATURE FOCUS: Creep Control
This video shows how to engage the Creep Control feature.
/ Compact Wheel Loader / 906-908M FEATURE FOCUS: Creep Control
906-908M WHEEL LOADER: Operation Overview
A overview of the daily operation of the 906-908M.
/ Compact Wheel Loader / 906-908M WHEEL LOADER: Operation Overview
906-908M WHEEL LOADER: Safety & Service
A exploration of the major operating systems of the machine.
/ Compact Wheel Loader / 906-908M WHEEL LOADER: Safety & Service
906-908M WHEEL LOADER: Inspect
Overview of a daily inspection for a compact wheel loader.
/ Compact Wheel Loader / 906-908M WHEEL LOADER: Inspect
LARGE HEX: Machine Display Settings
A look at changing display settings and shortcuts on your Next Gen monitor.
/ Next Gen HEX Large / LARGE HEX: Machine Display Settings
LARGE HEX: Assist Fine Tune Calibration
This module contains a live demo of the assist fine tune calibration process that must be completed before a new attachment is added to an excavator.
/ Next Gen HEX Large / LARGE HEX: Assist Fine Tune Calibration
LHEX FEATURE FOCUS: E-fence Setup
A demonstration of how to set up the new safety technology features of the Next Gen Large HEX, including e-floor, e-ceiling, and e-wall.
/ Next Gen HEX Large / LHEX FEATURE FOCUS: E-fence Setup
LARGE HEX: Bucket Measure Up
Understanding how to conduct a Bucket Measure Up for the Next Gen Large Hydraulic Excavator.
/ Next Gen HEX Large / LARGE HEX: Bucket Measure Up
LARGE HEX: Operation Overview
The basic operations, including startup and shutdown procedures, for the Next Gen Large Hydraulic Excavators (336-395).
/ Next Gen HEX Large / LARGE HEX: Operation Overview
LARGE HEX: Efficiency Features
An overview of features of the Next Gen Large HEX.
/ Next Gen HEX Large / LARGE HEX: Efficiency Features
LARGE HEX: Preventive Maintenance
A look at the regular maintenance points for CAT Next Gen Large Hydraulic Excavators.
/ Next Gen HEX Large / LARGE HEX: Preventive Maintenance
LARGE HEX: Lift Assist
An overview of the lift assist function of the Next Gen Large HEX.
/ Next Gen HEX Large / LARGE HEX: Lift Assist
LARGE HEX: Safety
A review of basic safety features for the CAT Next Gen Large Hydraulic Excavators.
/ Next Gen HEX Large / LARGE HEX: Safety
LARGE HEX: Inspect
This video goes over the daily walk around inspection of the CAT Large hydraulic excavators.
/ Next Gen HEX Large / LARGE HEX: Inspect
LARGE HEX: Monitor Setup
An overview of the monitor setup on a Next Gen Large HEX
/ Next Gen HEX Large / LARGE HEX: Monitor Setup
LARGE HEX: Grade Assist
An overview of the grade assist features on the Next Gen Large HEX
/ Next Gen HEX Large / LARGE HEX: Grade Assist
LARGE HEX: Payload Calibration
Understanding the payload calibration on the Next Gen Large Hydraulic Excavator
/ Next Gen HEX Large / LARGE HEX: Payload Calibration
Compact Track Loader: Inspect
Proper daily inspection of the machine before every shift or after every 10 hours of operation. Includes ground level walk-around, inspection of engine compartment and fluid levels.
/ Compact Track Loader / Compact Track Loader: Inspect
Compact Track Loader: Systems
A overview of the compact track loader D3 series, track maintenance, and adjustment.
/ Compact Track Loader / Compact Track Loader: Systems
Compact Track Loader: Operation Overview
A brief overview of the operator controls and basic operating functions of this machine, including startup, travel, and joystick controls.
/ Compact Track Loader / Compact Track Loader: Operation Overview
299D3 Feature Focus: Creep Control, Return to Dig, and Dual Self-Level
The following unique features are demonstrated in this module: Creep Control, Return to Dig, and Dual Self Level.
/ Compact Track Loader / 299D3 Feature Focus: Creep Control, Return to Dig, and Dual Self-Level
Compact Track Loader: Safety
This module is an exploration of the safety components of the machine, including operator ergonomics and emergency features.
/ Compact Track Loader / Compact Track Loader: Safety
SMALL WHEEL LOADER: Safety
Safety tips and features for the CAT Small Wheel Loader (926M-938M).
/ Wheel Loader Small / SMALL WHEEL LOADER: Safety
SMALL WHEEL LOADER: Preventive Maintenance
Preventative Maintenance tips and features for the CAT Small Wheel Loader (926M-938M).
/ Wheel Loader Small / SMALL WHEEL LOADER: Preventive Maintenance
SWL FEATURE FOCUS: Rim Pull
A guide on how to set the rim pull control feature on your CAT Small Wheel Loader.
/ Wheel Loader Small / SWL FEATURE FOCUS: Rim Pull
SWL FEATURE FOCUS: Kick-Outs, Snubbing, Wrap-Out, & Soft Detents
An in-depth look at the kick-out, snubbing, wrap-out, and soft detents features on the Small Wheel Loader.
/ Wheel Loader Small / SWL FEATURE FOCUS: Kick-Outs, Snubbing, Wrap-Out, & Soft Detents
SWL FEATURE FOCUS: Customization
Step by step instructions on how to customize the operational feel of your machine, including the power train and implement controls.
/ Wheel Loader Small / SWL FEATURE FOCUS: Customization
SWL FEATURE FOCUS: Hystat Power Train Operation
Operator tips to get the most out of the CAT Small Wheel Loader hystat powertrain.
/ Wheel Loader Small / SWL FEATURE FOCUS: Hystat Power Train Operation
SWL FEATURE FOCUS: Creep Mode, Engine Idle Shutdown, & DEF Alarm
An overview of the Small Wheel Loader creep control feature, engine idle shutdown, and DEF alarm system.
/ Wheel Loader Small / SWL FEATURE FOCUS: Creep Mode, Engine Idle Shutdown, & DEF Alarm
LARGE WHEEL LOADER K Series: Operator Controls
An in-depth look into the operator controls of the K- Series Large Wheel Loader.
/ Wheel Loader Large / LARGE WHEEL LOADER K Series: Operator Controls
LARGE WHEEL LOADER K Series: Basic Operator Tips
An overview of the basic operator tips on the K Series Large Wheel Loader.
/ Wheel Loader Large / LARGE WHEEL LOADER K Series: Basic Operator Tips
LARGE WHEEL LOADER K Series: Preventative Maintenance
A look at some preventive maintenance features on the K Series Large Wheel Loader.
/ Wheel Loader Large / LARGE WHEEL LOADER K Series: Preventative Maintenance
Off-Highway Truck: Fatal Safety Mistakes
In this classic video from CAT, we review some general safety guidelines for the Off-Highway Truck and how to avoid mistakes that can be fatal.
/ Off-Highway Truck / Off-Highway Truck: Fatal Safety Mistakes
Off-Highway Truck: Daily Inspection
A thorough daily inspection of the CAT Off-Highway Truck, presented by MSHA.
/ Off-Highway Truck / Off-Highway Truck: Daily Inspection
Off-Highway Truck: Preventive Maintenance Walkaround
A brief overview of the preventive maintenance and safety features on the CAT 770G and 772G Off-Highway Trucks.
/ Off-Highway Truck / Off-Highway Truck: Preventive Maintenance Walkaround
Excavation Safety (Part 2: Trench Protection)
When working in a trench it is critical to use the proper protection equipment. This module is the second in a three part examination of excavation and trenching safety.
/ Excavation and Trenching Safety / Excavation Safety (Part 2: Trench Protection)
Excavation Safety (Part 3: Underground Hazards)
On any excavation site, hazards from underground utilities can exist putting operators and workers in danger. In this final excavation module, learn how to identify these hazards before you dig and what to do if you accidentally encounter them.
/ Excavation and Trenching Safety / Excavation Safety (Part 3: Underground Hazards)
Scaffolding Safety
An overview of OSHA’s safety standards for supported and suspended scaffold systems.
/ Off The Ground / Scaffolding Safety
Ladders and Stairways (Part 1)
The first in a two part series on safe practices on or around ladders and stairways.
/ Off The Ground / Ladders and Stairways (Part 1)
Ladders and Stairways (Part 2)
The second in a two part series on safe practices on or around ladders and stairways.d
/ Off The Ground / Ladders and Stairways (Part 2)
Know Your Rights
Identifying the safety responsibilities of both employers and employees and knowing the rights OSHA gives to workers.
/ Introduction to OSHA / Know Your Rights
Standards and General Safety
Understanding how to identify OSHA’s General Safety Standards and implement them on the job site.
/ Introduction to OSHA / Standards and General Safety
OSHA's Responsibility
Examining OSHA’s process for inspecting and ensuring workplace safety standards.
/ Introduction to OSHA / OSHA's Responsibility
What is OSHA
An overview of the history and duties of the Occupational Safety and Health Administration.
/ Introduction to OSHA / What is OSHA
What is a Hazard?
Hazards are everywhere on a construction site. In order to stay safe, every worker must be able to identify the hazards around them and then consciously assess the risk of each.
/ Focus Four Hazards / What is a Hazard?
Struck By
Learn to recognize and prevent Struck-by hazards on a construction site.
/ Focus Four Hazards / Struck By
Risk Tolerance
Why do we take risks? Preventing dangerous habits from forming can prevent serious injury or even death on a job.
/ Focus Four Hazards / Risk Tolerance
Fall Prevention Part 1
This module explores the first, and deadliest, of the “Focus  Four” Hazards: Slips, Trips and Falls.
/ Focus Four Hazards / Fall Prevention Part 1
Fall Prevention Part 2 and Fall Arrest Systems
If protection measures fail and a fall happens, a properly used personal fall arrest system can save your life.
/ Focus Four Hazards / Fall Prevention Part 2 and Fall Arrest Systems
Electrical Hazards Part 1
The first of a two-part study on Construction Electrical Safety; from dangers to prevention.
/ Focus Four Hazards / Electrical Hazards Part 1
Electrical Hazards Part 2
The second of a two-part study on Construction Electrical Safety; from dangers to prevention.
/ Focus Four Hazards / Electrical Hazards Part 2
Caught Between
Learn to recognize and prevent Caught-between and Caught-in hazards on a construction site.
/ Focus Four Hazards / Caught Between
Tool Safety: Power Tools
In this module you will learn how to properly select, inspect and safely handle the most common power tools found in construction.
/ Tools: Hand and Power / Tool Safety: Power Tools
Tool Safety: Hand Tools
In this module you will learn how to properly select, inspect and safely handle the most common hand tools found in construction.
/ Tools: Hand and Power / Tool Safety: Hand Tools
PPE: Personal Protective Equipment (Part 1)
PPE is much more than helmets, goggles and gloves. In this final module on workplace PPE, we’ll examine how to choose the right protective clothing, how to keep it clean, and how your body tells you that additional PPE may be necessary.
/ PPE and Lifesaving Equipment / PPE: Personal Protective Equipment (Part 1)
PPE: Personal Protective Equipment (Part 2)
All PPE should be safely designed and constructed and kept in a clean and reliable fashion. In this second part we’ll focus on ways PPE can keep you safe from damaging noise, airborne hazards and potential injury to your hands and arms.
/ PPE and Lifesaving Equipment / PPE: Personal Protective Equipment (Part 2)
PPE: Personal Protective Equipment (Part 3)
When engineering or workplace safety controls fail or are not feasible, Personal Protective Equipment, (or “PPE”) can be the last line of defense against an injury. This module covers the basics of construction PPE, including selecting the right head and eye protection.
/ PPE and Lifesaving Equipment / PPE: Personal Protective Equipment (Part 3)
Pathogen Prevention
This module explores the ways dangerous pathogens can spread, both airborne and bloodborne, and the prevention measures workers can take for each.
/ Health Hazards in Construction / Pathogen Prevention
Housekeeping & Distractions
Many injuries can be prevented by incorporating some simple and effective habits, including basic housekeeping procedures and staying focused on the job.
/ Health Hazards in Construction / Housekeeping & Distractions
Heat & Cold Stress
Working in extreme hot and cold environments often cannot be avoided. In those situations, taking the necessary precautions can save your life.
/ Health Hazards in Construction / Heat & Cold Stress
Chemical Hazards
Physical exposure to chemical and toxic substances pose a wide range of potential hazards to workers in construction.
/ Health Hazards in Construction / Chemical Hazards
Biological Hazards
The biological hazards workers face can include bacteria, viruses, fungi, vegetation and even animals. This module describes how to identify each and what to do when you encounter it.t
/ Health Hazards in Construction / Biological Hazards
Airborne Hazards
You may not see them, but potentially fatal hazards can exist in the air you breathe. This module explores the most common, and dangerous, airborne hazards found on a construction job site.
/ Health Hazards in Construction / Airborne Hazards
Fire Protection
Because fire is one of the most powerful elements on the planet, it’s essential that we are aware of the risk it presents and the ways we can prevent it from getting out of control.
/ Fire Protection / Fire Protection
Materials Handling (Part 1)
The efficient moving, handling and storage of materials are vital to the construction industry. This is the first of two modules examining the safe practices for materials handling to avoid costly injuries.
/ Materials Handling / Materials Handling (Part 1)
Materials Handling (Part 2)
This module continues the discussion of safe practices for materials handling, including hoisting heavy objects and proper storage of raw materials.
/ Materials Handling / Materials Handling (Part 2)
Part 1 | We All Have Mental Health
This is the first in a five part series of the IBEAM (Ideal Body Environment and Mind) program designed to provide fundamental awareness and information on mental health challenges and suicide issues. Presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness & Suicide Awareness / Part 1 | We All Have Mental Health
Part 5 | Preventing Suicide
In the U.S., the suicide rate is highest in the construction industry and is four times higher than the national average. In this module we explore the roles and steps to take in preventing suicide. Series presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness & Suicide Awareness / Part 5 | Preventing Suicide
Spray It: Tack Distributor Demonstration
This module takes you to a live highway paving job as workers set up and spray tack coat from a distributor tank. A companion module to the LeeBoy tack buggy overview series.
/ Build It / The Road / Spray It: Tack Distributor Demonstration
Part 2 | Taking Care: A Look At Mental Health
Our lifestyle and habits can directly impact our mental health. Just like we should exercise our bodies to keep our hearts, lungs, and other vital organs healthy, we also need to take care of our brains. Series presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness & Suicide Awareness / Part 2 | Taking Care: A Look At Mental Health
Part 3 | Construction: An Industry In Crisis
In this module, we discuss the higher rates of both mental illness and suicide occur in the construction industry in comparison to any other occupation. Series presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness & Suicide Awareness / Part 3 | Construction: An Industry In Crisis
Part 4 | Responding To A Mental Health Crisis
A mental health crisis is a situation where emotional distress becomes too great and normal day-to-day functions become impossible to complete on your own. In this module, we discuss signs to recognize distress and how you can take action to help. Series presented in partnership by Willis Towers Watson and SAVE.
/ IBEAM / Mental Wellness & Suicide Awareness / Part 4 | Responding To A Mental Health Crisis
Excavation Safety (Part 1: Trench Hazards)
Excavation and trenching are among the most hazardous construction operations. This module describes the safe work practices that can protect workers from cave-ins and other hazards when working in and around excavation sites.
/ Excavation and Trenching Safety / Excavation Safety (Part 1: Trench Hazards)
COVID-19 Guidelines
This module covers best practices for minimizing the risks and effects of SARS-CoV-2, the virus which causes the disease COVID-19. Levels of risk for occupational groups is discussed along with preventative measures to staying safe.
/ Compliance / Health / COVID-19 Guidelines
The Abutment: Pour It
This module teaches the proper pouring technique for bridges and what the properties of the concrete should be.
/ Build It / The Bridge / The Abutment: Pour It
Vac Truck: Operate
This module explains the proper operation of the VACUUM function for the truck.
/ Equipment / Vac Truck / Vac Truck: Operate
Scissor Lift: Operate
This Union Concrete module covers the basic operations for the scissor lift truck.
/ Lifts / Platform Lifts / Scissor Lift: Operate
Vac Truck: Wash It
This equipment module covers the basic operation of the high pressure washing function of the Vac Truck
/ Equipment / Vac Truck / Vac Truck: Wash It
Non-Ionizing Radiation
Understanding what is non-ionizing radiation and the hazards it can cause.
/ Jobsite Hazards / Environmental / Non-Ionizing Radiation
Vac Truck: Inspect
This module demonstrates the proper inspection procedure required prior to operation of the vacuum truck.
/ Operator Inspection / Daily Walkaround / Vac Truck: Inspect
Measure Like a Pro
How do you measure up? In this module CAHill master carpenter Rick Klug advises newer carpenters how to select the right tape measure for the job and how to quickly and accurately measure your way around a construction site. The module also provides several helpful tips that will help even long-time construction pros get the most out of their measurement tools.
/ Like A Pro / Measure Like a Pro
Excavator: Components
This video will show the different components and how to use them on an excavator
/ Equipment / Excavator-eq / Excavator: Components
Track Time: Basics
This video describes different types of tracks for machines and what type of track to use in what situation.
/ Equipment / Excavator-eq / Track Time: Basics
Widener: Components
This video module covers the key components and proper safety techniques when working with the road widener.
/ Equipment / Paving / Widener: Components
Scissor Lift: Components
This Union Concrete module describes and demonstrates the major components of the scissor lift truck.
/ Lifts / Platform Lifts / Scissor Lift: Components
Vac Truck: Components
This module gives you a clear overview of the major components of the vacuum truck and their function.
/ Equipment / Vac Truck / Vac Truck: Components
MWL FEATURE FOCUS: Payload Scale, Ride Control, Engine Idle Timer
The focus of this video demonstrates the unique features of the MWL such as payload scale, ride control, and engine idle timer.
/ Wheel Loader Medium / MWL FEATURE FOCUS: Payload Scale, Ride Control, Engine Idle Timer
MEDIUM WHEEL LOADER: Preventive Maintenance
A look at several key preventive maintenance tips for the CAT Medium Wheel Loader family (950-982).
/ Wheel Loader Medium / MEDIUM WHEEL LOADER: Preventive Maintenance
MWL FEATURE FOCUS: Joystick Steering
Joystick steering can replace the traditional steering wheel (when equipped) on certain Medium Wheel Loader models. This module provides a brief overview of how it works.
/ Wheel Loader Medium / MWL FEATURE FOCUS: Joystick Steering
MWL FEATURE FOCUS: Ride Control
A demonstration on setting up and operating the Ride Control feature on CAT Medium Wheel Loaders.
/ Wheel Loader Medium / MWL FEATURE FOCUS: Ride Control
SMALL WHEEL LOADER: Inspect
Step by step daily inspection walkaround for the CAT small wheel loader family.
/ Wheel Loader Small / SMALL WHEEL LOADER: Inspect
SMALL WHEEL LOADER: Operation Overview
A step by step review of the startup and shutdown procedures for the CAT Small Wheel Loader, as well as a detailed look at the operator controls.
/ Wheel Loader Small / SMALL WHEEL LOADER: Operation Overview
Principles of Road Compaction Part 1
This is the first in a three part training on the basics of road compaction. Part 1 discusses the three key factors to consider when rolling asphalt and a review of the basic components of a tandem drum vibratory compactor.
/ Build It / The Road / Principles of Road Compaction Part 1
Principles of Road Compaction Part 2
This is the second in a three part training on the basics of road compaction. Part 2 explains how to conduct a daily walkaround inspection, safety considerations, and a quick demonstration of the basic rolling pattern.
/ Build It / The Road / Principles of Road Compaction Part 2
Principles of Road Compaction Part 3
This is the third in a three part training on the basics of road compaction. Part 3 breaks down factors to consider when rolling; including water, vibration, temperature, and mat thickness.
/ Build It / The Road / Principles of Road Compaction Part 3
Risk Tolerance
In this training you will learn how to assess risks and work as a team to help prevent work related incidents.
/ Site Leader / Daily Assessment / Risk Tolerance
Control Measures
This module for jobsite leaders will walk you through what measures you can control on a jobsite, as well as why you should take into consideration an employee's experience and suggestions.
/ Site Leader / Daily Assessment / Control Measures
Flagger Training Part 5: Flagging Scenarios
This final module explains how to direct traffic in unique conditions, including flagging around curves in the road, hills, one-person operation, night flagging, and changes in the weather.
/ Control It / Flagger Training / Flagger Training Part 5: Flagging Scenarios
Principles of Paving Part 2
This second part introduction to paving module explains how a crew works together to lay asphalt, including efficiency, communication, and safety considerations.
/ Build It / The Road / Principles of Paving Part 2
WZTC Part 5: Advance Warning Area
Learn about elements contained in the first section of a work zone: the Advance Warning Area, and general MUTCD guidelines about warning sign materials, mounting height, size, placement, installation, and more.
/ Control It / WZTC / WZTC Part 5: Advance Warning Area
Toolbox Talks: Safe Cell Phone Usage
Mobile phones have become increasingly common around construction sites, providing useful benefits, while also creating new risks. Discover industry practices on how your crew can avoid a phone related safety incident while at work.
/ Site Leader / Toolbox Talks / Toolbox Talks: Safe Cell Phone Usage
Before You Tow: Trailer Hookup & Pre-trip Inspection
Step by step demonstration on how to properly hook up a trailer to a ball or pintle hitch, as well as conducting a pre-trip walk around inspection before you hit the road.
/ Move It / Tow Behind / Before You Tow: Trailer Hookup & Pre-trip Inspection
Toolbox Talks: Giving a Toolbox Talk
Kevin Labas from The Safety Collective provides some effective tips that can help leaders keep recurring safety meetings both engaging and relevant to your crew.
/ Site Leader / Toolbox Talks / Toolbox Talks: Giving a Toolbox Talk
Toolbox Talks: Managing Stress & Fatigue
Every construction worker will experience stress and fatigue. In this Toolbox Talk, Safety expert Kevin Labas provides pro tips to help workers manage stress in a healthy way.
/ Site Leader / Toolbox Talks / Toolbox Talks: Managing Stress & Fatigue
Hazard Control Measures
It is the responsibility of every supervisor and worker on a construction site to establish control measures and adhere to them. In this final OSHA10 training module, learn to implement the four levels of hazard control for an overall culture of safety.
/ Hazard Control Measures / Hazard Control Measures
Toolbox Talks: What is a Safety Data Sheet?
Learn what a Safety Data Sheet (SDS) is and why every employee who works around chemical products should familiarize themselves with them.
/ Site Leader / Toolbox Talks / Toolbox Talks: What is a Safety Data Sheet?
Housekeeping: In the Field
Best practices for good outdoor housekeeping for any work zone or job site.
/ Jobsite Hazards / Environmental / Housekeeping: In the Field
Site Manager Responsibility
Discover everything a road construction Site Leader (Supervisor, Project Manager) is responsible for throughout the course of a typical day, as well as the contingencies when unexpected challenges happen.
/ Plan It / Site Knowledge / Site Manager Responsibility
Toolbox Talks: Lone Worker Situations
Being a lone worker on a job site should be avoided, but can't always be. This Toolbox Talk will outline proper precautions to take while working as a lone worker and what to do if an incident arises.
/ Site Leader / Toolbox Talks / Toolbox Talks: Lone Worker Situations
Toolbox Talks: Stop Work Authority
Stop Work Authority can be an instrumental part of any safety program to reduce workplace incidents. This toolbox talk explains what it is and how employees can use it responsibly.
/ Site Leader / Toolbox Talks / Toolbox Talks: Stop Work Authority
Toolbox Talks: Working with Inspectors
Site inspectors are a normal part of the job, and you will undoubtedly have to deal with them at one point or another. Learn how you should work with them and make the best out of their visits.
/ Site Leader / Toolbox Talks / Toolbox Talks: Working with Inspectors
Career Empowerment: Adaptability
A critical component to every construction job is its workforce's adaptability. Learning how to be adaptable to weather, diversity, schedules, and other variables makes teams even stronger.
/ Career Empowerment / Career Empowerment: Adaptability
Principles of Paving Part 3: Demonstration
Take a trip to an actual highway job to review the basic operation of an asphalt paver.
/ Build It / The Road / Principles of Paving Part 3: Demonstration
WZTC Part 3: Traffic Control Devices
An overview of common traffic control devices such as channelizing markers, barricades, signs, and signals. Learn the proper use of each device, visibility considerations, and why national standards must be observed.
/ Control It / WZTC / WZTC Part 3: Traffic Control Devices
Portable Ladder Safety
Best safety practices for setting up and using portable extension and folding step ladders.
/ Jobsite Hazards / Focus Four / Portable Ladder Safety
Scaffold: Installation and Safety
Learn how to conduct simple scaffolding for above-ground work and what safety precautions should be implemented.
/ Lifts / Platform Lifts / Scaffold: Installation and Safety
Career Empowerment: Dependability
Dependability on construction sites is imperative to getting the job done successfully and safely.
/ Career Empowerment / Career Empowerment: Dependability
Career Empowerment: Positive Attitude
Having a positive attitude is a great way to be a team player. It's not always easy, but John gives tips on learning how to cope and control yourself around negativity.
/ Career Empowerment / Career Empowerment: Positive Attitude
Career Empowerment: Professionalism
Professionalism on construction sites is reflected in the work you do, how you communicate, how you dress, and that of the company for which you work.
/ Career Empowerment / Career Empowerment: Professionalism
Career Empowerment: Self-Motivation
What motivates you? If you can answer that question, you are a self-motivator -- and that means great potential in the construction industry!
/ Career Empowerment / Career Empowerment: Self-Motivation
Career Empowerment: Teachability
There's a lot to learn when starting a new job! Make sure you're open-minded and positive, and you'll have the perfect attitude to be willing to learn from those around you.
/ Career Empowerment / Career Empowerment: Teachability
Construction Math Part 6: Ratios & Slopes
When working with earth and other materials, waste factors are important. In construction, mounds of dirt, or piles of other materials all have slopes and safety factors that need consideration. Learn how to calculate the ratios (or grade) of slopes, and how to stay safe when working around unstable materials.
/ Construction Math / Construction Math Part 6: Ratios & Slopes
Chainsaw: Tree Felling
When clearing land it may become necessary to fell a tree by hand. Learn the proper way to assess a tree, make cuts with a chainsaw, and safely drop it where you want it to fall.
/ Clear It / Clearing / Chainsaw: Tree Felling
Grind Like a Pro
Learn how to safely use an angle grinder, tips on the types of PPE needed to protect yourself while using this hand tool, and learn about the wheels and discs that can be used for cutting, grinding, and finishing various materials on the job.
/ Like A Pro / Grind Like a Pro
Saw Like a Pro Part 1: Safety
Circular saws are one of the most common small tools on the job site. Learn about different types of saws, saw safety, sawhorses, blades, PPE required to protect yourself, and how to make sure your tools are safe to use.
/ Like A Pro / Saw Like a Pro Part 1: Safety
Saw Like a Pro Part 2: Basic Cuts
Get sawing tips and tricks–like choosing the right pencil, using speed squares and straight edges, securing materials with clamps and screws, and using a rip fence–with basic cuts like the crosscut (cutting perpendicular to wood grain), the rip cut (cutting with the wood grain), and pocket cuts (cutting inside a board).
/ Like A Pro / Saw Like a Pro Part 2: Basic Cuts
Saw Like a Pro Part 3: Additional Saws
Each saw has its applications for cutting many materials used in building and construction. Round out sawing like a true professional by learning about other kinds of power saws you’ll encounter on a job site—jig saws, table saws, reciprocating saws, miter saws—and their applications, along with safety tips for safe usage.
/ Like A Pro / Saw Like a Pro Part 3: Additional Saws
Career Empowerment: Communication
Communication is KEY to productive collaboration and safety. Learn how construction pros talk and listen to their team, positioning themselves for long term career success.
/ Career Empowerment / Career Empowerment: Communication
Construction Math Part 1: Overview
Math is everywhere in construction. This introductory module explains how to write out U.S. standards of measurement, understand tolerances, and the essential tools for calculating measurements with accuracy.
/ Construction Math / Construction Math Part 1: Overview
Construction Math Part 2: Fractions & Decimals
As nice as whole numbers are, the reality is that fractions and decimals will be a part of every single day at a construction site. Learn parts of a fraction and how to convert them to decimals, the benefits of using a calculator, and how to add, subtract, multiply and divide fractions.
/ Construction Math / Construction Math Part 2: Fractions & Decimals
Construction Math Part 3: Calculating Length
This module covers linear length and perimeter. Understand how to read a tape measure and other measurement tools, like a surveyor's wheel. Learn to measure length and depth, and how to use those lengths to calculate perimeters of various shapes.
/ Construction Math / Construction Math Part 3: Calculating Length
Construction Math Part 4: Calculating Area
Measuring area is the first step to knowing how to properly measure, estimate, and order materials for job sites. Learn the equations to calculate areas of rectangles, triangles, and circles along with some tips for measuring more complex spaces.
/ Construction Math / Construction Math Part 4: Calculating Area
Construction Math Part 5: Calculating Volume
Adding a third dimension to a shape's area will help you calculate volume. Learn the equation for determining the volume of various shapes, such as building materials and containers.
/ Construction Math / Construction Math Part 5: Calculating Volume
Land Clearing & Grubbing
There are many important things to know going into clearing land. This module will help you understand how to prep and what tools to use for clearing and grubbing.
/ Clear It / Clearing / Land Clearing & Grubbing
Construction Math Part 7: Calculating Weight Load
How heavy is your load? This is a very important safety question when it comes to hauling materials, lifting loads, and not exceeding weight limit capacities on machines. In this module, learn how to put a series of equations together to calculate weights of materials so you can stay safe in the field. Lose your load, lose your job.
/ Construction Math / Construction Math Part 7: Calculating Weight Load
Financial Literacy Part 1: Reading Your Pay Stub
One of the best parts of a job is getting paid, but where is all the money going? Learn how to read a pay stub to know how much you are bringing home and what is being withheld by your employer.
/ Financial Literacy / Financial Literacy Part 1: Reading Your Pay Stub
Financial Literacy Part 2: Save and Spend Wisely
Before you buy that new truck or house, you’ll need a plan to manage your money. In this module, you’ll learn the wise saving and spending principles, including how to make a budget, that can make your financial dreams a reality.
/ Financial Literacy / Financial Literacy Part 2: Save and Spend Wisely
Financial Literacy Part 3: Understanding Credit and Debt
Most people will need to borrow money at some point in their life. How you manage that debt can make the difference between staying on top of your financial goals or finding yourself in a pit that is hard to climb out of.
/ Financial Literacy / Financial Literacy Part 3: Understanding Credit and Debt
Financial Literacy Part 4: Investing In Your Future
What your retirement will look like is entirely up to you! Learn how to get started saving today for a great retirement with this video from the Department of Labor's Employee Benefits Security Administration.
/ Financial Literacy / Financial Literacy Part 4: Investing In Your Future
Demolition
/ Clear It / Demolition
Material Hauling
/ Move It / Material Hauling
Body
/ Personal Safety / Body
Emergency Response
/ Personal Safety / Emergency Response
Licensing
/ Compliance / Licensing
GPS
/ Plan It / GPS
Clearing
/ Clear It / Clearing
Earthworks
/ Clear It / Earthworks
Drainage Structures
/ Build It / Drainage Structures
The Bridge
/ Build It / The Bridge
The Road
/ Build It / The Road
Tow Behind
/ Move It / Tow Behind
Maintenance
/ System Check / Maintenance
WZTC
/ Control It / WZTC
Daily Walkaround
/ Operator Inspection / Daily Walkaround
Fluids
/ System Check / Fluids
Excavator-at
/ Attachments / Excavator-at
CTL and Loader
/ Attachments / CTL and Loader
Excavator-eq
/ Equipment / Excavator-eq
PPE
/ Personal Safety / PPE
Environmental
/ Jobsite Hazards / Environmental
Focus Four
/ Jobsite Hazards / Focus Four
Dig Safely Course
/ Jobsite Hazards / Dig Safely Course
Harassment
/ Compliance / Harassment
Site Knowledge
/ Plan It / Site Knowledge
Tied Down
/ Move It / Tied Down
Health
/ Compliance / Health
Daily Assessment
/ Site Leader / Daily Assessment
Mental Wellness & Suicide Awareness
/ IBEAM / Mental Wellness & Suicide Awareness
Toolbox Talks
/ Site Leader / Toolbox Talks
Vac Truck
/ Equipment / Vac Truck
Motor Grader
/ Equipment / Motor Grader
Paving
/ Equipment / Paving
Crane
/ Equipment / Crane
Tri-Axle Dump
/ Equipment / Tri-Axle Dump
Platform Lifts
/ Lifts / Platform Lifts
Forklift Training
/ Lifts / Forklift Training
Flagger Training
/ Control It / Flagger Training
Signaling
/ Control It / Signaling
Plan It
This category shows the proper planning of a project through GPS and setting the proper boundaries.
Site Ops / Plan It
Build It
This category will teach how to build a bridge and road.
Site Ops / Build It
Operator Inspection
This category will show the proper way to inspect multiple vehicles and equipment in order to keep them safe
Iron / Operator Inspection
Equipment
This category teaches components and operation of heavy machinery.
Iron / Equipment
Clear It
This category shows how to clear out a potential job site through removal of objects in the way.
Site Ops / Clear It
Control It
This category teaches the proper way to control work zone traffic.
Site Ops / Control It
System Check
This category will teach you about components for different vehicles, cooling systems, and fluids for your vehicle.
Iron / System Check
Personal Safety
This category will teach you the proper set up and use of personal safety gear.
Safety / Personal Safety
Jobsite Hazards
This category will show how to safely navigate different types of hazards such as environmental, above and below, and focus four.
Safety / Jobsite Hazards
Compliance
This category guides you though different regulatory guidelines such as sexual harassment, COVID-19, and licensing.
Safety / Compliance
Excavation and Trenching Safety
This category shows the OSHA 10 regulations regarding excavation and trenching training.
OSHA / Excavation and Trenching Safety
Off The Ground
This category shows the OSHA 10 regulations regarding off the ground training.
OSHA / Off The Ground
Introduction to OSHA
This category is an introduction to OSHA 10 regulations and standards.
OSHA / Introduction to OSHA
Focus Four Hazards
This category shows the OSHA 10 regulations regarding focus four hazards training.
OSHA / Focus Four Hazards
Tools: Hand and Power
This category shows the OSHA 10 regulations regarding hand and power tools training.
OSHA / Tools: Hand and Power
PPE and Lifesaving Equipment
This category shows the OSHA 10 regulations regarding PPE and lifesaving equipment training.
OSHA / PPE and Lifesaving Equipment
Health Hazards in Construction
This category shows the OSHA 10 regulations regarding health hazards in construction.
OSHA / Health Hazards in Construction
Fire Protection
This category shows the OSHA 10 regulations regarding fire protection training.
OSHA / Fire Protection
Materials Handling
This category shows the OSHA 10 regulations regarding materials handling training.
OSHA / Materials Handling
Next Gen HEX Mini
This category shows how to safely operate, maintain, and inspect the Next Gen Hex Mini.
MiltonCAT / Next Gen HEX Mini
D6 XE Dozer
This category shows how to safely operate, maintain, and inspect the D6 XE Dozer.
MiltonCAT / D6 XE Dozer
Wheel Loader Medium
This category shows how to safely operate, maintain, and inspect the Medium Wheel Loader.
MiltonCAT / Wheel Loader Medium
Articulated Dump Trucks
This category shows how to safely operate, maintain, and inspect the Articulated Dump Trucks.
MiltonCAT / Articulated Dump Trucks
Tier 4 Final
This Category shows what Tier 4 final is and how to properly maintain a machine with DEF.
MiltonCAT / Tier 4 Final
Landfill Compactor
This category shows how to safely operate, maintain, and inspect the Landfill Compactor.
MiltonCAT / Landfill Compactor
Next Gen HEX Medium
This category shows how to safely operate, maintain, and inspect the Next Gen HEX Medium.
MiltonCAT / Next Gen HEX Medium
Compact Wheel Loader
This category shows how to safely operate, maintain, and inspect Compact Wheel Loaders.
MiltonCAT / Compact Wheel Loader
Next Gen HEX Large
This category shows how to safely operate, maintain, and inspect the Next Gen HEX Large.
MiltonCAT / Next Gen HEX Large
Compact Track Loader
This category shows how to safely operate, maintain, and inspect Compact Track Loaders/Skid Steers.
MiltonCAT / Compact Track Loader
Wheel Loader Small
This category shows how to safely operate, maintain, and inspect the Small Wheel Loader.
MiltonCAT / Wheel Loader Small
Off-Highway Truck
This category shows how to safely operate, maintain, and inspect the Off-Highway Truck.
MiltonCAT / Off-Highway Truck
Wheel Loader Large
This category shows how to safely operate, maintain, and inspect the Large Wheel Loader.
MiltonCAT / Wheel Loader Large
Site Leader
This category teaches site leaders and foreman about hazards and regulations on a job site.
Safety / Site Leader
IBEAM
This category provides fundamental awareness and information on mental health challenges and suicide issues.
Safety / IBEAM
Hazard Control Measures
This category shows the OSHA 10 regulations regarding hazard control measures training.
OSHA / Hazard Control Measures
Move It
This category shows the proper way to haul material, tie down objects and machines, and tow trailers and machines.
Site Ops / Move It
Lifts
This category teaches how to safely operate forklifts and platform aerial lifts..
Iron / Lifts
Like A Pro
This category teaches the basics of the most common hand tools.
Job Ready / Like A Pro
Career Empowerment
This category teaches the importance of on-the-job soft skills.
Job Ready / Career Empowerment
Financial Literacy
This category teaches the basics of managing your finances.
Job Ready / Financial Literacy
Attachments
This category teaches about machine attachments.
Iron / Attachments
Construction Math
This category teaches basic construction math, including fractions, decimals, ratios, and slopes, as well as calculating lengths, areas, volumes, and weights.
Job Ready / Construction Math
Job Ready
Job Ready
Site Ops
Site Ops
Safety
Safety
OSHA
OSHA
MiltonCAT
MiltonCAT
Iron
Iron
All
  • Job Ready
  • Site Ops
  • Safety
  • OSHA
  • MiltonCAT
  • Iron
Search
Explore 42 categories
Plan It - Featured image
Site Ops
Plan It
This category shows the proper planning of a project through GPS and setting the proper boundaries.
Modules
Training details
Build It - Featured image
Site Ops
Build It
This category will teach how to build a bridge and road.
Modules
Training details
Operator Inspection - Featured image
Iron
Operator Inspection
This category will show the proper way to inspect multiple vehicles and equipment in order to keep them safe
Modules
Training details
Equipment - Featured image
Iron
Equipment
This category teaches components and operation of heavy machinery.
Modules
Training details
Clear It - Featured image
Site Ops
Clear It
This category shows how to clear out a potential job site through removal of objects in the way.
Modules
Training details
Control It - Featured image
Site Ops
Control It
This category teaches the proper way to control work zone traffic.
Modules
Training details
System Check - Featured image
Iron
System Check
This category will teach you about components for different vehicles, cooling systems, and fluids for your vehicle.
Modules
Training details
Personal Safety - Featured image
Safety
Personal Safety
This category will teach you the proper set up and use of personal safety gear.
Modules
Training details
Jobsite Hazards - Featured image
Safety
Jobsite Hazards
This category will show how to safely navigate different types of hazards such as environmental, above and below, and focus four.
Modules
Training details
Compliance - Featured image
Safety
Compliance
This category guides you though different regulatory guidelines such as sexual harassment, COVID-19, and licensing.
Modules
Training details
Excavation and Trenching Safety - Featured image
OSHA
Excavation and Trenching Safety
This category shows the OSHA 10 regulations regarding excavation and trenching training.
Modules
Training details
Off The Ground - Featured image
OSHA
Off The Ground
This category shows the OSHA 10 regulations regarding off the ground training.
Modules
Training details
Introduction to OSHA - Featured image
OSHA
Introduction to OSHA
This category is an introduction to OSHA 10 regulations and standards.
Modules
Training details
Focus Four Hazards - Featured image
OSHA
Focus Four Hazards
This category shows the OSHA 10 regulations regarding focus four hazards training.
Modules
Training details
Tools: Hand and Power - Featured image
OSHA
Tools: Hand and Power
This category shows the OSHA 10 regulations regarding hand and power tools training.
Modules
Training details
PPE and Lifesaving Equipment - Featured image
OSHA
PPE and Lifesaving Equipment
This category shows the OSHA 10 regulations regarding PPE and lifesaving equipment training.
Modules
Training details
Health Hazards in Construction - Featured image
OSHA
Health Hazards in Construction
This category shows the OSHA 10 regulations regarding health hazards in construction.
Modules
Training details
Fire Protection - Featured image
OSHA
Fire Protection
This category shows the OSHA 10 regulations regarding fire protection training.
Modules
Training details
Materials Handling - Featured image
OSHA
Materials Handling
This category shows the OSHA 10 regulations regarding materials handling training.
Modules
Training details
Next Gen HEX Mini - Featured image
MiltonCAT
Next Gen HEX Mini
This category shows how to safely operate, maintain, and inspect the Next Gen Hex Mini.
Modules
Training details
D6 XE Dozer - Featured image
MiltonCAT
D6 XE Dozer
This category shows how to safely operate, maintain, and inspect the D6 XE Dozer.
Modules
Training details
Wheel Loader Medium - Featured image
MiltonCAT
Wheel Loader Medium
This category shows how to safely operate, maintain, and inspect the Medium Wheel Loader.
Modules
Training details
Articulated Dump Trucks - Featured image
MiltonCAT
Articulated Dump Trucks
This category shows how to safely operate, maintain, and inspect the Articulated Dump Trucks.
Modules
Training details
Tier 4 Final - Featured image
MiltonCAT
Tier 4 Final
This Category shows what Tier 4 final is and how to properly maintain a machine with DEF.
Modules
Training details
Landfill Compactor - Featured image
MiltonCAT
Landfill Compactor
This category shows how to safely operate, maintain, and inspect the Landfill Compactor.
Modules
Training details
Next Gen HEX Medium - Featured image
MiltonCAT
Next Gen HEX Medium
This category shows how to safely operate, maintain, and inspect the Next Gen HEX Medium.
Modules
Training details
Compact Wheel Loader - Featured image
MiltonCAT
Compact Wheel Loader
This category shows how to safely operate, maintain, and inspect Compact Wheel Loaders.
Modules
Training details
Next Gen HEX Large - Featured image
MiltonCAT
Next Gen HEX Large
This category shows how to safely operate, maintain, and inspect the Next Gen HEX Large.
Modules
Training details
Compact Track Loader - Featured image
MiltonCAT
Compact Track Loader
This category shows how to safely operate, maintain, and inspect Compact Track Loaders/Skid Steers.
Modules
Training details
Wheel Loader Small - Featured image
MiltonCAT
Wheel Loader Small
This category shows how to safely operate, maintain, and inspect the Small Wheel Loader.
Modules
Training details
Off-Highway Truck - Featured image
MiltonCAT
Off-Highway Truck
This category shows how to safely operate, maintain, and inspect the Off-Highway Truck.
Modules
Training details
Wheel Loader Large - Featured image
MiltonCAT
Wheel Loader Large
This category shows how to safely operate, maintain, and inspect the Large Wheel Loader.
Modules
Training details
Site Leader - Featured image
Safety
Site Leader
This category teaches site leaders and foreman about hazards and regulations on a job site.
Modules
Training details
IBEAM - Featured image
Safety
IBEAM
This category provides fundamental awareness and information on mental health challenges and suicide issues.
Modules
Training details
Hazard Control Measures - Featured image
OSHA
Hazard Control Measures
This category shows the OSHA 10 regulations regarding hazard control measures training.
Modules
Training details
Move It - Featured image
Site Ops
Move It
This category shows the proper way to haul material, tie down objects and machines, and tow trailers and machines.
Modules
Training details
Lifts - Featured image
Iron
Lifts
This category teaches how to safely operate forklifts and platform aerial lifts..
Modules
Training details
Like A Pro - Featured image
Job Ready
Like A Pro
This category teaches the basics of the most common hand tools.
Modules
Training details
Career Empowerment - Featured image
Job Ready
Career Empowerment
This category teaches the importance of on-the-job soft skills.
Modules
Training details
Financial Literacy - Featured image
Job Ready
Financial Literacy
This category teaches the basics of managing your finances.
Modules
Training details
Attachments - Featured image
Iron
Attachments
This category teaches about machine attachments.
Modules
Training details
Construction Math - Featured image
Job Ready
Construction Math
This category teaches basic construction math, including fractions, decimals, ratios, and slopes, as well as calculating lengths, areas, volumes, and weights.
Modules
Training details

Looking to see aQuiRe™ in action?

Get in touch and let our industry experts show you what makes aQuiRe™ the construction industry’s best training and safety tool.